A phosphogypsum flotation tailings-derived zeolite (PGTZ) was synthesized from the tailings produced during the reverse flotation of phosphogypsum through alkaline fusion and hydrothermal treatment. The response surface methodology (RSM) utilizing a three-level Box–Behnken design (BBD) was used to assess the adsorption of MB by PGTZ. Polynomial regression models were developed to analyze the effects of process parameters on adsorption capacity (qe). The maximum MB adsorption occurred under the following optimized conditions: PGTZ dosage = 5.31 g·L−1; initial MB concentration = 294.59 mg·L−1; pH = 7.42; and adsorption time = 187.89 min. Additionally, adsorption isotherm and kinetic models were fitted to the experimental data to determine model parameters. The Langmuir isotherm model and pseudo-second-order kinetic model incorporating intraparticle diffusion were able to effectively predict MB adsorption onto PGTZ. Thermodynamic analyses indicated that the adsorption process was spontaneous, with strong chemical interactions between MB and PGTZ.
The excessive use of tetracycline (TC) poses a severe threat to the health of humans and ecosystems. Environmentally friendly photocatalytic technology can be effectively used to degrade TC. In this study, an Fe-modified UIO-66 (Fe/UIO-66) catalyst was prepared via a solvothermal method. The structural and optical properties were investigated to elucidate how the electronic interaction between Fe and UIO-66 influenced the light absorption capacity of Fe/UIO-66. A xenon lamp was used to simulate sunlight, and TC was taken as the target pollutant. The results of photocatalytic experiments showed that the degradation efficiency of Fe/UIO-66 for TC reached 80% within 120 min, superior to that of UIO-66. In addition, the experiment also investigated the influence of inorganic salt ions on the catalytic performance, proving that Fe/UIO-66 could be applied for the efficient removal of TC in complex water bodies.
The development of lithium-ion batteries necessitates cathode materials that possess excellent mechanical and thermal properties in addition to electrochemical performance. As a prominent functional ceramic, the properties of spinel LiMn2O4 are governed by its atomic-level structure. This study systematically investigates the impact of Ni doping concentration on the mechanical and thermal properties of spinel LiNixMn2−xO4 via first-principles calculations combined with the bond valence model. The results suggest that when x = 0.25, the LiNixMn2−xO4 shows excellent mechanical properties, including a high bulk modulus and hardness, due to the favorable ratio of bond valence to bonds length in octahedra. Furthermore, this optimized composition shows a lower thermal expansion coefficient. Additionally, Ni doping concentration has a very minimal influence on the maximum tolerable temperature of the cathode material during rapid heating. Therefore, from the perspective of mechanical and thermal properties, this composition could be beneficial for improving the cycling life of the battery, since comparatively inferior mechanical properties and a higher thermal expansion coefficient make it prone to microcrack formation during charge–discharge cycles.
Tetracycline (TC) is a widely used antibiotic that is frequently detected in rivers, lakes and wastewater. Because TC is poorly removed by conventional biological treatment, its residues can harm aquatic organisms and promote the spread of antibiotic resistance; efficient and low-cost technologies for removing TC from water are therefore needed. In this study, copper smelting slag (CSS), an abundant industrial solid waste, was converted into a catalyst composed of Fe3O4 particles loaded on mesoporous silica (denoted Fe3O4@MS) via an alkali fusion–hydrothermal method. The catalyst was used to activate peroxymonosulfate (PMS), forming the Fe3O4@MS/PMS treatment system for the degradation of TC in aqueous solution. The effects of the main operating parameters (catalyst dosage, PMS concentration, initial pH and reaction temperature) on TC degradation were systematically evaluated. Under the optimized conditions (catalyst 0.5 g/L, PMS 1.0 mmol/L, initial pH 6.5, 25 °C), the Fe3O4@MS/PMS system removed 98.70% of 50 mg/L TC within 60 min. Radical quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that TC was degraded through both radical pathways (hydroxyl •OH, sulfate SO4•− and superoxide O2•− radicals) and a non-radical pathway involving singlet oxygen (1O2), with •OH being the dominant reactive species. Nine degradation intermediates were identified by liquid chromatography–mass spectrometry (LC-MS), based on which three degradation pathways were proposed. Toxicity estimation indicated that ring-opening and deamination reactions are the key steps for detoxification. In addition, a life cycle assessment (LCA) across five selected impact categories identified the main environmental burdens associated with catalyst production. Overall, this work demonstrates that CSS-derived Fe3O4@MS is an efficient, low-cost and sustainable catalyst for PMS-based antibiotic removal from water, offering a circular-economy approach that couples solid-waste valorization with clean water production.