Bisphenol A (BPA) is a component used in the production of polycarbonate plastics (PC) and epoxy resins, which are currently widely used in food and beverage packaging. Although BPA is not used in polyethylene terephthalate (PET) manufacturing, a recent study reported its presence in PET water bottles. This study was conducted to investigate the effects of storage conditions on the release of BPA from PET bottles as well as to assess health risks associated with the consumption of bottled water. Using high-performance liquid chromatography (HPLC), we measured the content of BPA in local brands of plastic bottled water sold in the Polish market. It has been established that temperature is one of the main factors that influences the migration of bisphenol A to products, as was confirmed by determination of the amount of bisphenol A in water, which was carried out without exposing the bottles to different temperatures. Despite the fact that the individual concentrations of BPA in bottled water were low (ng/L) at 0.6 mg/kg (body weight), the cumulative daily dose in the body may be much higher than the quoted concentrations due to the number of products containing BPA. Thus, prolonged usage of bottled water and beverages should be avoided to reduce the risk of human exposure to BPA through leaching. Additionally, it was found that high temperatures resulted in increased BPA leaching.
The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions. Very often the first step in dealing with such wastewater is the reduction in chromium content. In some cases, removal of Cr(III) from wastewaters is an important step for pretreatment of solutions to prepare them for subsequent recovery of other metals. In the review, hydrometallurgical operations for Cr(III) removal are presented, including examples of Cr(III) recovery from real industrial effluents with precipitation, adsorption, ion exchange, extraction, membrane techniques, microbial-enhanced techniques, electrochemical methods. The advantages and disadvantages of the operations mentioned are also presented. Finally, perspectives for the future in line with circular economy and low-environmental impact are briefly discussed.
Membrane fouling is a major hindrance to widespread wastewater treatment applications. This study optimizes operating parameters in membrane rotating biological contactors (MRBC) for maximized membrane fouling through Response Surface Methodology (RSM) and an Artificial Neural Network (ANN). MRBC is an integrated system, embracing membrane filtration and conventional rotating biological contactor in one individual bioreactor. The filtration performance was optimized by exploiting the three parameters of disk rotational speed, membrane-to-disk gap, and organic loading rate. The results showed that both the RSM and ANN models were in good agreement with the experimental data and the modelled equation. The overall R2 value was 0.9982 for the proposed network using ANN, higher than the RSM value (0.9762). The RSM model demonstrated the optimum operating parameter values of a 44 rpm disk rotational speed, a 1.07 membrane-to-disk gap, and a 10.2 g COD/m2 d organic loading rate. The optimization of process parameters can eliminate unnecessary steps and automate steps in the process to save time, reduce errors and avoid duplicate work. This work demonstrates the effective use of statistical modeling to enhance MRBC system performance to obtain a sustainable and energy-efficient treatment process to prevent human health and the environment.
This study is focused on the kinetics and adsorption isotherms of amine-functionalized magnesium ferrite (MgFe2O4) for treating the heavy metals in wastewater. A sol-gel route was adopted to produce MgFe2O4 nanoparticles. The surfaces of the MgFe2O4 nanoparticles were functionalized using primary amine (ethanolamine). The surface morphology, phase formation, and functionality of the MgFe2O4 nano-adsorbents were studied using the SEM, UV-visible, FTIR, and TGA techniques. The characterized nanoparticles were tested on their ability to adsorb the Pb2+, Cu2+, and Zn2+ ions from the wastewater. The kinetic parameters and adsorption isotherms for the adsorption of the metal ions by the amine-functionalized MgFe2O4 were obtained using the pseudo-first-order, pseudo-second-order, Langmuir, and Freundlich models. The pseudo-second order and Langmuir models best described the adsorption kinetics and isotherms, implying strong chemisorption via the formation of coordinative bonds between the amine groups and metal ions. The Langmuir equation revealed the highest adsorption capacity of 0.7 mmol/g for the amine-functionalized MgFe2O4 nano-adsorbents. The adsorption capacity of the nanoadsorbent also changed with the calcination temperature. The MgFe2O4 sample, calcined at 500 °C, removed the most of the Pb2+ (73%), Cu2+ (59%), and Zn2+ (62%) ions from the water.
The rotating biological contactor (RBC) is resistant to toxic chemical and shock loadings, and this results in significant organic and nutrient removal efficiencies. The RBC system offers a low-energy footprint and saves up to 90% in energy costs. Due to the system’s low-energy demand, it is easily operable with renewable energy sources, either solar or wind power. An RBC was employed to degrade pollutants in domestic wastewater through biodegradation mechanisms in this study. The high microbial population in the RBC bioreactor produced excellent biological treatment capacity and higher effluent quality. The results showed that the RBC bioreactor achieved an average removal efficiency of 73.9% of chemical oxygen demand (COD), 38.3% of total nitrogen (TN), 95.6% of ammonium, and 78.9% of turbidity. Investigation of operational parameters, disk rotational speed, HRT, and SRT, showed the biological performance impact. Disk rotational speed showed uniform effluent quality at 30–40 rpm, while higher values of disk rotational speed (>40 rpm) resulted in lower effluent quality in COD, TN, and turbidity. The longer hydraulic retention time and sludge retention time (SRT) facilitated higher biological performance efficiency. The longer SRTs enabled the higher TN removal efficiency because of the higher quantity of microbial biomass retention. The longer SRT also resulted in efficient sludge-settling properties and reduced volume of sludge production. The energy evaluation of the RBC bioreactor showed that it consumed only 0.14 kWh/m3, which is significantly lower than the conventional treatment methods; therefore, it is easily operable with renewable energy sources. The RBC is promising substitute for traditional suspended growth processes as higher microbial activity, lower operational and maintenance costs, and lower carbon foot print enhanced the biological performance, which aligns with the stipulations of ecological evolution and environment-friendly treatment.