A Mw 6.6 earthquake struck Menyuan, Qinghai, China, on 7 January 2022. To determine the rupture parameters of this event, the coseismic InSAR deformation fields were mapped and further employed to estimate the focal mechanism. The best-fitting solution emphasized that the 2022 Menyuan earthquake ruptured at the junction of the Tuolaishan fault and the Lenglongling fault. Both rupturing faults were dominated by sinistral strike-slip, and the main slip was concentrated on the shallow part of the rupture plane. The latter was the main rupture segment with a strike of 106° and a dip of 86°. The slip mainly occurred at depths of 0–8 km, and the rupture was exposed at the surface. The maximum slip reached ~3.5 m, which occurred mainly at a depth of 4 km. Joint analysis of the optimal slip model, relocated aftershocks, Coulomb stress change, and field observation suggested that the strain energy in the Tuolaishan fault may not have been fully released and needs further attention. Moreover, the 2022 Mw6.6 Menyuan earthquake caused a significant stress loading effect on the western Tuolaishan fault and eastern Lenglongling fault, which implies that the 2022 event increased the seismic hazard in these regions.
Earthquakes often induce collapse or cause extreme damage to large areas of buildings. One of the most important requirements for earthquake emergency operations is staying up-to-date on the extent of structural damage in earthquake-stricken areas. Terrestrial laser scanning (TLS) technology can directly obtain the coordinates of mass points while maintaining a high measurement accuracy, thereby providing the means to directly extract quantitative information from surface cracks on damaged buildings. In this paper, we present a framework for extracting wall cracks from high-density TLS point clouds. We first differentiate wall points from nonwall points using the TLS data. Then, a planar triangulation modeling method is used to construct a triangular irregular network (TIN) dataset, after which a raster surface is generated using an inverse distance weighting point cloud rasterization method based on the crack width. Then, cracks are extracted based on their shape features. We extract six sets of wall cracks from a damaged building wall in Beichuan County as an example of employing the above-mentioned method; the damage was caused by the Wenchuan earthquake. Quantitative calculations reveal that the extraction accuracy of the proposed method is greater than 91% and that the rate of leakage detection is less than 10%. In addition, the main limiting factor of the extraction accuracy is the crack width, that is, a wider crack will result in a higher extraction accuracy. In addition, the crack connectivity and leakage rate are negatively correlated, that is, a higher connectivity corresponds to a lower rate of missed extractions.
A Mw 6.6 earthquake struck Menyuan, Qinghai, China, on January 7, 2022. To determine the rupture parameters and the seismogenic environment, we resolve the optimal rupture parameters and discuss the tectonic implications of this earthquake event. The Coseismic InSAR deformation maps suggested a maximum of ~80 cm distributed in the light-of-sight direction of the satellite on the southern side of the fault and a maximum of ~70 cm on the northern side. We further estimated the focal mechanism by building a two-segment sinistral strike-slip fault model. The best-fitting solution emphasized that the 2022 Menyuan earthquake ruptured at the junction of the Tuolaishan fault and the Lenglongling fault. Both rupturing faults were dominated by the sinistral strike-slip, and the main slip was concentrated at the shallow part of the rupture plane. The latter is the main rupture segment with a strike of 106{degree sign} and a dip of 86{degree sign}. The slip has mainly occurred at depths of 0-8 km, and the rupture was exposed to the surface. The maximum slip reached ~3.5 m, which was mainly distributed at a depth of 4 km. Jointed analysis of optimal slip model, relocated aftershocks, Coulomb stress change, and field observation suggested that the strain energy in Tuolaishan fault may not be fully released and needs further attention. Moreover, the 2022 Mw6.6 Menyuan earthquake caused a significant stress loading effect on the western Tuolaishan fault and eastern Lenglongling fault, which implied that the 2022 event had strengthened the seismic risk in these regions.
Terrestrial laser scanners (TLSs) can acquire high‐precision three‐dimensional point cloud data for earthquake‐damaged buildings. In this study, we collected TLS data in the Wenchuan earthquake zone and developed the TLS‐BSAM (terrestrial laser scanning‐based building shape analysis model) to carry out a building earthquake damage analysis. This model involves equidistance polygon array extraction, shape dispersion parameter calculations, irregular building clustering segmentation, and damage analysis. We chose 21 buildings as samples for the experiments. The results show that when using an equidistance polygon array to depict a three‐dimensional building, 0.5 m is a reasonable sampling interval for building earthquake damage analysis. Using certain characteristic parameters to carry out K‐means clustering, one can efficiently divide irregular buildings into regular blocks. Then, by weighted averages, the shape dispersion parameters can be calculated to express the damage extent to buildings. Among the shape dispersion parameters, at least the weighted average standard deviations of the tilt direction, rectangularity, compactness, and center point are suitable to reflect the damage extent. Higher values reflect more serious damage. On the basis of existing data, the weighted average standard deviations of the tilt direction and center point can be used to establish discriminant functions that can effectively distinguish the damage extent.