ACKNOWLEDGMENTS This work is supported by the National Subsea Research Institute (NSRI) UK.Peer reviewedPostprin

Acknowledgements A.P. would like to acknowledge the support of the National Subsea Research Institute (NSRI) UK. E.P. and M.W. are grateful for partial support provided by the Italian Ministry of Education, University and Research (MIUR) by the PRIN funded program 2010/11 N.2010MBJK5BPeer reviewedPostprin

Vibrations of slender structures associated with the external flow present a design challenge for the energy production systems placed in the marine environment. The current study explores the accuracy of the semi-empirical wake oscillator models for vortex-induced vibrations (VIV) based on the optimization of (a) the damping term and (b) empirical coefficients in the fluid equation. This work investigates the effect of ten fluid damping variations, from the classic van der Pol to more sophisticated fifth-order terms, and prediction of the simplified case of the VIV of transversally oscillating rigid structures provides an opportunity for an extended, comprehensive comparison of the performance of tuned models. A constrained nonlinear minimization algorithm in MATLAB is applied to calibrate considered models using the published experimental data, and the weighted objective function is formulated for three different mass ratios. Comparison with several sources of published experimental data for cross-flow oscillations confirms the model accuracy in the mass ratio range. The study indicates the advantageous performance of the models tuned with the medium mass ratio data and highlights some advantages of the Krenk–Nielsen wake oscillator.

The UK National Grid has placed increased emphasis on the development of Demand Side Response (DSR) tariff mechanisms to manage load at peak times. Refrigeration systems, along with HVAC, are estimated to consume 14% of the UK’s electricity and could have a significant role for DSR application. However, characterized by relatively low individual electrical loads and massive asset numbers, multiple low power refrigerators need aggregation for inclusion in these tariffs. In this paper, the impact of the Demand Side Response (DSR) control mechanisms on food retailing refrigeration systems is investigated. The experiments are conducted in a test-rig built to resemble a typical small supermarket store. The paper demonstrates how the temperature and pressure profiles of the system, the active power and the drawn current of the compressors are affected following a rapid shut down and subsequent return to normal operation as a response to a DSR event. Moreover, risks and challenges associated with primary and secondary Firm Frequency Response (FFR) mechanisms, where the load is rapidly shed at high speed in response to changes in grid frequency, is considered. For instance, measurements are included that show a significant increase in peak inrush currents of approx. 30% when the system returns to normal operation at the end of a DSR event. Consideration of how high inrush currents after a DSR event can produce voltage fluctuations of the supply and we assess risks to the local power supply system.