Pentacene is a well-known conjugated organic molecule with high mobility and a sensitive photo response. It is widely used in electronic devices, such as in organic thin-film transistors (OTFTs), organic light-emitting diodes (OLEDs), photodetectors, and smart sensors. With the development of flexible and wearable electronics, the deposition of good-quality pentacene films in large-scale organic electronics at the industrial level has drawn more research attention. Several methods are used to deposit pentacene thin films. The thermal evaporation technique is the most frequently used method for depositing thin films, as it has low contamination rates and a well-controlled deposition rate. Solution-processable methods such as spin coating, dip coating, and inkjet printing have also been widely studied because they enable large-scale deposition and low-cost fabrication of devices. This review summarizes the deposition principles and control parameters of each deposition method for pentacene and its derivatives. Each method is discussed in terms of experimentation and theory. Based on film quality and device performance, the review also provides a comparison of each method to provide recommendations for specific device applications.
A piezoelectric ultrasonic transducer has been developed to detect flow rate, occlusion, and bubble formation in a portable peritoneal dialysis system. This transducer works by utilizing the piezoelectric effect to convert electrical energy into ultrasonic waves and detect the reflected waves through the tube wall. In addition, organic thin film transistors (OTFTs) were tested at annealing temperatures of 75 °C, 100 °C, and 125 °C to evaluate the effect of temperature on mobility and on/off ratio. The best results were obtained at 100 °C with a mobility of 0.816 cm2/Vs and an on/off ratio of 1.4 × 103 correlated with grain size. This study aims to report the fabrication process and initial characterization of the OTFT device as a first step towards the development of a portable biosensor that can be integrated into a point-of-care system. The transducer is designed for use in PeritoCare® (Bangi, Malaysia), a portable peritoneal dialysis system developed by Universiti Kebangsaan Malaysia (UKM). The integration of piezoelectric transducers and OTFTs into the PeritoCare® system enables the development of a more flexible, efficient, and mobile peritoneal dialysis system for young, active end-stage renal disease (ESRD) patients.
About Me
Institute Microengineering and Nanoelectronic (IMEN), Universiti Kebangsaan Malaysia (UKM), 43600, Bangi, Selangor, Malaysia
Institute Microengineering and Nanoelectronic (IMEN), Universiti Kebangsaan Malaysia (UKM), 43600, Bangi, Selangor, Malaysia