A DNA sensor has been proposed on the platform of glassy carbon electrode modified with native DNA implemented between two electropolymerized layers of polyaniline. The surface layer was assembled by consecutive stages of potentiodynamic electrolysis, DNA drop casting, and second electrolysis, which was required for capsulation of the DNA molecules and prevented their leaching into the solution. Surface layer assembling was controlled by cyclic voltammetry, electrochemical impedance spectroscopy, atomic force, and scanning electron microscopy. For doxorubicin measurement, the DNA sensor was first incubated in the Methylene blue solution that amplified signal due to DNA intercalation and competition with the doxorubicin molecules for the DNA binding sites. The charge transfer resistance of the inner layer interface decreased with the doxorubicin concentration in the range from 1.0 pM to 0.1 μM (LOD 0.6 pM). The DNA sensor was tested for the analysis of spiked artificial urine samples and showed satisfactory recovery in concentration range of 0.05–10 μM. The DNA sensor developed can find application in testing of antitumor drugs and some other DNA damaging factors.

The determination of antibiotics in food is important due to their negative effect on human health related to antimicrobial resistance problem, renal toxicity, and allergic effects. We propose an impedimetric aptasensor for the determination of kanamycin A (KANA), which was assembled on the glassy carbon electrode by the deposition of carbon black in a chitosan matrix followed by carbodiimide binding of aminated aptamer mixed with oligolactide derivative of thiacalix[4]arene in a cone configuration. The assembling was monitored by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. In the presence of the KANA, the charge transfer resistance of the inner interface surprisingly decreased with the analyte concentration within 0.7 and 50 nM (limit of detection 0.3 nM). This was attributed to the partial shielding of the negative charge of the aptamer and of its support, a highly porous 3D structure of the surface layer caused by a macrocyclic core of the carrier. The use of electrostatic assembling in the presence of cationic polyelectrolyte decreased tenfold the detectable concentration of KANA. The aptasensor was successfully tested in the determination of KANA in spiked milk and yogurt with recoveries within 95% and 115%.

Mycotoxins are secondary metabolites of fungi that contaminate agriculture products. Their release in the environment can cause severe damage to human health. Aptasensors are compact analytical devices that are intended for the fast and reliable detection of various species able to specifically interact with aptamers attached to the transducer surface. In this review, assembly of electrochemical and surface plasmon resonance (SPR) aptasensors are considered with emphasis on the mechanism of signal generation. Moreover, the properties of mycotoxins and the aptamers selected for their recognition are briefly considered. The analytical performance of biosensors developed within last three years makes it possible to determine mycotoxin residues in water and agriculture/food products on the levels below their maximal admissible concentrations. Requirements for the development of sample treatment and future trends in aptasensors are also discussed.

In this work, we investigated aggregation of native DNA and thiacalix[4]arene derivative bearing eight terminal amino groups in cone configuration using various redox probes on the glassy carbon electrode. It was shown that sorption transfer of the aggregates on the surface of the electrode covered with carbon black resulted in changes in electrostatic interactions and diffusional permeability of the surface layer. Such changes alter the signals of ferricyanide ion, methylene green and hydroquinone as redox probes to a degree depending on their specific interactions with DNA and own charge. Inclusion of DNA in the surface layer was independently confirmed by scanning electron microscopy, electrochemical impedance spectroscopy and experiments with doxorubicin as a model intercalator. Thermal denaturing of DNA affected the charge separation on the electrode interface and the signals of redox probes. Using hydroquinone, less sensitive to electrostatic interactions, made it possible to determine from 10 pM to 1.0 nM doxorubicin (limit of detection 3 pM) after 10 min incubation. Stabilizers present in the commercial medications did not alter the signal. The DNA sensors developed can find future application in the assessment of the complexes formed by DNA and macrocycles as delivery agents for small chemical species.