The carbonation of reinforced concrete is one of the intrinsic factors that cause a significant decrease in service performance in concrete structures. To decrease the effect of carbonation-induced corrosion during the lifetime of the concrete structure, a prediction of carbonation depth should be made. The carbonation of concrete is affected by many factors, such as the compressive strength of the concrete, service life, carbonation time, carbon dioxide concentration, working stress, temperature, and humidity. On the basis of these seven parameters, combined with the predictive power of the adaptive network-based fuzzy inference system (ANFIS) and principal component analysis (PCA), which can reduce data dimensions before modeling, we introduced a novel approach—the PCA–ANFIS model—that can predict the carbonation of reinforced concrete. Practical engineering examples were adopted to verify the superiority of the suggested PCA–ANFIS model, with 90% of the carbonation depth data used for training and 10% used for testing. The root mean square error (RMSE) values for the ANFIS, ANN, PCA–ANN, and PCA–ANFIS training were 12.23, 6.28, 5.42, and 1.38, respectively. The results showed that the PCA–ANFIS model is accurate and can be used as a fundamental tool for predicting the service life of concrete structures.
5 January 2023 in Computational Intelligence and Neuroscience
The corrosion of steel bars in concrete has a significant impact on the durability of constructed structures. Based on the gray relational analysis (GRA) of the accelerated corrosion data and practical engineering data using MATLAB, a back propagation neural network (BPNN) model, a multivariable gray prediction model (GM (1, N)), and an optimization multivariable gray prediction model (OGM (1, N)) of steel corrosion were established by using a sequence of the key affecting factors. By comparing the prediction results of the three models, it is found that the GM (1, N) model has larger fitting and prediction errors for steel corrosion, while the OGM (1, N) model has smaller prediction errors in the accelerated corrosion data; the BPNN model offers more accurate predictions of the practical engineering data. The results show that the BPNN and OGM (1, N) models are all suitable for the prediction of steel bar corrosion in concrete structures.
15 October 2024 in Tehnicki vjesnik - Technical Gazette
Coconut coir dust has a potential utilization as bio-fuel pellet. The objective of this contribution is to understand the mechanical characterisation of coconut coir under compaction. Four moulds with hole diameter of 6, 12, 20 and 25 mm are adopted...