The carbonation of reinforced concrete is one of the intrinsic factors that cause a significant decrease in service performance in concrete structures. To decrease the effect of carbonation-induced corrosion during the lifetime of the concrete structure, a prediction of carbonation depth should be made. The carbonation of concrete is affected by many factors, such as the compressive strength of the concrete, service life, carbonation time, carbon dioxide concentration, working stress, temperature, and humidity. On the basis of these seven parameters, combined with the predictive power of the adaptive network-based fuzzy inference system (ANFIS) and principal component analysis (PCA), which can reduce data dimensions before modeling, we introduced a novel approach—the PCA–ANFIS model—that can predict the carbonation of reinforced concrete. Practical engineering examples were adopted to verify the superiority of the suggested PCA–ANFIS model, with 90% of the carbonation depth data used for training and 10% used for testing. The root mean square error (RMSE) values for the ANFIS, ANN, PCA–ANN, and PCA–ANFIS training were 12.23, 6.28, 5.42, and 1.38, respectively. The results showed that the PCA–ANFIS model is accurate and can be used as a fundamental tool for predicting the service life of concrete structures.
5 January 2023 in Computational Intelligence and Neuroscience
The corrosion of steel bars in concrete has a significant impact on the durability of constructed structures. Based on the gray relational analysis (GRA) of the accelerated corrosion data and practical engineering data using MATLAB, a back propagation neural network (BPNN) model, a multivariable gray prediction model (GM (1, N)), and an optimization multivariable gray prediction model (OGM (1, N)) of steel corrosion were established by using a sequence of the key affecting factors. By comparing the prediction results of the three models, it is found that the GM (1, N) model has larger fitting and prediction errors for steel corrosion, while the OGM (1, N) model has smaller prediction errors in the accelerated corrosion data; the BPNN model offers more accurate predictions of the practical engineering data. The results show that the BPNN and OGM (1, N) models are all suitable for the prediction of steel bar corrosion in concrete structures.
22 August 2025 in Journal of Thermal Spray Technology
Coconut coir dust and corn stover powder were taken as raw biomass materials for pellet production, using four uni-axial compression set-ups, to explore the influence of the diameter of the inner hole diameter of the cylinder, the depth in compression , and the depth remained in compaction on the pellet density. Sample of pellets produced at the force steady phase, the maximum pellet density of the coconut coir dust material is 1.53 g/cm3 (1530 kg/m3), and 1.23 g/cm3 (1230 kg/m3) of the corn stalk powder pellets are obtained, At the same time, in the process of the test, Failure to compress the two biomass raw materials into pellets also occurred, indicating that the compression parameters studied in the experiment had a significant impact on the pellet quality. On the basis of the obtained pelleting test data, taking into account the nonlinear characteristics between pellet density and processing parameters involved, the adaptive neuro-fuzzy influence system(ANFIS) method was used to predict the pellet density of coconut coir dust and corn stover powder. The results show that the method is effective for predicting the density of biomass particles.
Coconut coir dust has a potential utilization as bio-fuel pellet. The objective of this contribution is to understand the mechanical characterisation of coconut coir under compaction. Four moulds with hole diameter of 6, 12, 20 and 25 mm are adopted...