Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We describe the working principles of reconfigurable intelligent surfaces (RIS) and elaborate on different candidate implementations using metasurfaces and reflectarrays. We discuss the channel models suitable for both implementations and examine the feasibility of obtaining accurate channel estimates. Furthermore, we discuss the aspects that differentiate RIS optimization from precoding for traditional MIMO arrays highlighting both the arising challenges and the potential opportunities associated with this emerging technology. Finally, we present numerical results to illustrate the power of an RIS in shaping the key properties of a MIMO channel.

Reconfigurable intelligent surface (RIS) has drawn considerable attention from the research society recently, which creates favorable propagation conditions by controlling the phase shifts of the reflected waves at the surface, thereby enhancing wireless transmissions. In this paper, we study a downlink multi-user system where the transmission from a multi-antenna base station (BS) to various users is achieved by the RIS reflecting the incident signals of the BS towards the users. Unlike most existing works, we consider the practical case where only a limited number of discrete phase shifts can be realized by the finite-sized RIS. A hybrid beamforming scheme is proposed and the sum-rate maximization problem is formulated. Specifically, the continuous digital beamforming and discrete RIS-based analog beamforming are performed at the BS and the RIS, respectively, and an iterative algorithm is designed to solve this problem. Both theoretical analysis and numerical validations show that the RIS-based system can achieve a good sum-rate performance by setting a reasonable size of RIS and a small number of discrete phase shifts.

In this letter, we consider an unmanned aerial vehicle (UAV) relay network where the UAV works as an amplify-and-forward (AF) relay. We optimize the trajectory of UAV and the transmit power of UAV and the mobile device (MD) by minimizing the outage probability of this relay network. The analytical expression of outage probability is derived firstly. A closed-form low-complexity solution with joint trajectory design and power control is proposed to solve this non-convex problem. Simulation results show that the outage probability of the proposed solution is significantly lower than that of the fixed power relay and circle trajectory for the UAV relay.

Recently, reconfigurable intelligent surfaces (RIS) have attracted a lot of attention due to their capability of extending cell coverage by reflecting signals toward the receiver. In this letter, we analyze the coverage of a downlink RIS-assisted network with one base station (BS) and one user equipment (UE). Since the RIS orientation and the horizontal distance between the RIS and the BS have a significant influence on the cell coverage, we formulate an RIS placement optimization problem to maximize the cell coverage by optimizing the RIS orientation and horizontal distance. To solve the formulated problem, a coverage maximization algorithm (CMA) is proposed, where a closed-form optimal RIS orientation is obtained. Numerical results verify our analysis.

In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through underlaying U2U communication for the sake of quality of service. We first propose a cooperative UAV sense-and-send protocol to enable the UAV-to-X communications, and then formulate the subchannel allocation and UAV speed optimization problem to maximize the uplink sum-rate. To solve this NP-hard problem efficiently, we decouple it into three sub-problems: U2I and cellular user (CU) subchannel allocation, U2U subchannel allocation, and UAV speed optimization. An iterative subchannel allocation and speed optimization algorithm (ISASOA) is proposed to solve these sub-problems jointly. Simulation results show that the proposed ISASOA can upload 10% more data than the greedy algorithm.

Reconfigurable intelligent surface (RIS) has drawn a great attention worldwide as it can create favorable propagation conditions by controlling the phase shifts of the reflected signals at the surface to enhance the communication quality. However, the practical RIS only has limited phase shifts, which will lead to the performance degradation. In this paper, we evaluate the performance of an uplink RIS assisted communication system by giving an approximation of the achievable data rate, and investigate the effect of limited phase shifts on the data rate. In particular, we derive the required number of phase shifts under a data rate degradation constraint. Numerical results verify our analysis.