High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.

This research was aimed at investigating the Saharan dust cloud recorded on 11 and 12 May 2020, by AERONET AOD stations in Italy, Austria, Slovakia, Poland, Ukraine, and Romania and determining whether it affected the area of the Republic of Moldova. During this period, the Chisinau AERONET monitoring site was not operational. The incentive for the investigation was the discovery of a high sediment load in rainwater collected on 12 May 2020 in Pelinia, a village in the Dochia district of the Republic of Moldova, in the southeastern part of Europe (47.8780 latitude, 27.8344 longitude), which could have originated from the Saharan dust storm. Backward trajectory analysis with NOAA’s HYSPLIT model confirmed that the Saharan dust storm impacted the village of Pelinia. Scanning electron microscopy coupled with electron dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR) analysis of Pelinia rainwater sediments confirmed the chemical composition and morphological structure of Saharan dust particles. The particle size of the sediments matched the measurements at the AOD stations at Timisoara and Magurele, supporting the suggestion that Saharan dust probably entered the Republic of Moldova from Romania. FTIR analysis identified chemical compounds such as carbon dioxide, carbonates, sulfates, ferrocyanides, and organics (amines, amides, polypeptides, imines, oximes, pyrroles, aldehydes, sulfoxides, sulfones, nitro-derivatives) that were adsorbed and/or absorbed from the atmosphere, consistent with Saharan dust aerosols. Bio-allergens such as pollen were detected in the SEM images, showing the role of Saharan dust in transporting and spreading this kind of biological material. This study highlights the risk of Saharan dust clouds to humans, animals, and plants, but also its potential benefits for agriculture when suitable conditions are met in this regard.

The study in this paper presents a new material that was produced as a thin film by the Pulsed Laser Deposition technique (PLD) using a 532 nm wavelength and 150 mJ/pulse laser beam on the hemp stalk as target. The analyses performed by spectroscopic techniques (Fourier Transform Infrared Spectroscopy—FTIR, Laser—Induced Fluorescence Spectroscopy—LIF, Scanning Electron Microscopy coupled with Energy Dispersive X-ray—SEM-EDX, Atomic Force Microscopy—AFM and optical microscope) evidenced that a biocomposite consisting of lignin, cellulose, hemicellulose, waxes, sugars and phenolyc acids p-coumaric and ferulic, similar to the hemp stalk target was obtained. Nanostructures and aggregated nanostructures of 100 nm to 1.5 μm size were evidenced. Good mechanical strength and its adherence to the substrate were also noticed. It was noticed that the content in calcium and magnesium increased compared to that of the target from 1.5% to 2.2% and from 0.2% to 1.2%, respectively. The COMSOL numerical simulation provided information on the thermal conditions that explain phenomena and processes during laser ablation such as C-C pyrolisis and enhanced deposition of calcium in the lignin polymer matrix. The good gas and water sorption properties due to the free OH groups and to the microporous structure of the new biocomposite components recommends it for studies for functional applications in medicine for drug delivery devices, filters in dialysis and for gas and liquid sensors. Functional applications in solar cells windows are also possible due to the conjugated structures of the contained polymers.

Dual-pulsed (DPL) laser deposition using oyster shells as targets was studied in order to find out if this method can replace the use of high-power pulsed lasers. Aspects related to changes in the morphological structure of the thin layer but also to the chemical composition of the obtained thin layer were analyzed and compared with the target as well as with the thin layers obtained with a higher power pulsed laser in a single-pulsed (SPL) regime. Orthorhombic structures were noticed with Scanning Electron Microscopy for the thin film obtained in DPL mode compared to the irregular particles obtained in SPL mode. The deacetylation process during ablation was evidenced by Fourier Transform Infrared spectroscopy, resulting in chitosan-based thin films. The effect of the obtained thin films of chitosan on the cells of baker’s yeast (Saccharomyces cerevisiae) was studied. Restoration of the yeast paste into initial yeast was noticed mainly when the hemp fabric was used as support for the coating with yeas which was after that coated with chitosan thin film produced by DPL method.

Crystalline silver thin layers were obtained using high-energy pulsed laser ablation without the heating of the deposition substrate. The fluid Plateau–Rayleigh (PRI), Rayleigh–Taylor (RTI), and Richtmyer–Meshkov (RMI) instabilities, as well as the crown splash induced during the pulsed laser deposition (PLD) in the high energy regime, resulting in ring and pearl-shaped structures, offer the benefit of an increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. This study addresses both fundamental and applied issues on the morphological structures obtained for the silver thin layers and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in an aqueous solution with sodium bicarbonate. Specific investigations and analyses were carried out using electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyses, the simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.

Crystalline silver thin layers were obtained by high-energy pulsed laser ablation without heating of the deposition substrate. The fluid Plateau-Rayleigh (PRI), Rayleigh – Taylor (RTI) and Richtmyer – Meshkov (RMI) instabilities, as well as crown splash induced during pulsed laser deposition (PLD) in high energy regime, resulting in ring and pearl shaped structures, offer the benefit of increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. The study presented with this work addresses both the fundamental and applied issues on the morphological structures obtained for the silver thin layer and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in aqueous solution with sodium bicarbonate. Specific investigations and analyzes were carried out by electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyzes, simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.