TiO₂–SiO₂ nanocomposite thin films have gained the attention of the scientific community due to their unique physical and chemical properties. In this paper, we report on the fabrication and characterization of a TiO₂–SiO₂ nanocomposite disk-shaped target. The target was used for the deposition of TiO₂–SiO₂ nanocomposite thin films on fluorine-doped tin oxide/glass substrates using the pulsed laser deposition (PLD) technique. The thicknesses of the thin films were fixed to 100 nm, and the deposition temperature ranged from room temperature to 300 °C. As revealed by the microstructural and morphological characterizations revealed, the TiO₂–SiO₂ nanocomposite thin films are amorphous and display homogeneous distribution. The determined values of the indirect optical band gap range from 2.92 to 3.07 eV, while those of the direct optical band gap lie between 3.50 and 3.55 eV. Additionally, as the deposition temperature decreases, the light transmission increases in the visible and in the ultraviolet ranges, which is suitable for flexible perovskite solar cells. This research can uncover new insights into the fabrication of amorphous TiO₂–SiO₂-based nanostructured thin films using the PLD technique for perovskite solar cell technology.

This paper presents the synthesis of gadolinium aluminate (GdAlO₃), an oxide compound with a perovskite structure, for applications as a capacitive and/or resistive humidity sensor. Gadolinium aluminate was synthesized by the sol-gel self-combustion method. This method allowed us to obtain a highly porous structure in which open pores prevail, a structure favorable to humidity sensors. Most of the materials studied as capacitive/resistive humidity sensors have significant sensitivities only with respect to one of these types of sensors. In the case of the studied gadolinium aluminate with p-type electric conductivity, the relative humidity of the air has a significant influence on both capacitive and resistive types of electric humidity sensors. The capacity increases about 10,000 times, and the resistance decreases about 8000 times as the relative humidity increases from 0 to 98%. The investigated gadolinium aluminate can be used successfully to obtain high-sensitivity capacitive and/or resistive humidity sensors.

In this paper, the physical properties of a new series of multilayer structures of oxide/metal/oxide type deposited on glass and plastic substrates were studied in the context of their use as transparent conductive layers for solar cells. The optical properties of TiO₂/Ag/TiO₂, TiO₂:Nb/Ag/TiO₂:Nb and NiO/Ag/NiO tri-layers were investigated by spectrophotometry and ellipsometry. Optimized ellipsometric modeling was employed in order to correlate the optical and electrical properties with the ones obtained by direct measurements. The wetting surface properties of single layers (TiO₂, TiO₂:Nb and NiO) and tri-layers (TiO₂/Ag/TiO₂ TiO₂:Nb/Ag/TiO₂:Nb and NiO/Ag/NiO) were also studied and good correlations were obtained with their morphological properties.