To reveal the internal unsteady flow state of the guide vane centrifugal pump, in this paper, the standard SST k‐ω turbulent flow model is used for unsteady numerical simulation of the centrifugal pump. The characteristics of the flow field inside the centrifugal pump are analyzed, the resultant force and vector distribution of the radial force of the guide vane and impeller of the centrifugal pump under different flow rates are obtained, which were verified by experiments. The results show that the main reason of radial force of the impeller is the pressure asymmetry in each flow passage. The radial force will show periodic fluctuations due to the rotor‐stator interference between the impeller and the guide vanes under different flow rates. The radial force on the impeller decreases gradually with the increase of the flow, the distribution is hexagonal or hexagonal shape, and the number of impeller blades is the same. The results can provide reference for the design of impeller and guide vane of centrifugal pump.
1 May 2022 in Journal of Renewable and Sustainable Energy
In this research, a distributed multi-generation system combining photovoltaic-thermal collectors with biomass generating units is established in a numerical simulation environment. This system aims to fulfilling heating demand of single-storey cottage located in Xi'an, Northwest China. The feasibility of this system and stepped utilization of different levels of energy are validated and illustrated. In order to achieve reachable maximum efficiency, key parameters of the system, such as collector area, thermal storage capacity, and set heating temperature among other parameters, are combined in a multitude of different ways, and a set of optimal parameters are obtained. After running the model, throughout the heating season, the results show that solar energy contributes 1698 kWh accounting for nearly 60% of the total energy input, while biomass accounts for 40% with 852.95 kWh, which directly determines the stability of the system energy supply. Once-daily maximum electricity buffer generated by the biomass generator holds at 21.67 kWh, the system is able to meet most of the heating load scenarios in Xi'an, China, without auxiliary energy input, as well as achieves the carbon neutrality goal.
Geothermal power plants have become the main application that utilizes geothermal energy. The utilization of deep geothermal energy adheres great importance to the soil condition. One of the biggest challenges faced by geothermal power plant designers is to reduce the risk of soil exploration. To solve this problem, forecasting by modeling has proven to be an important tool to address the problem. In this research, a geo-model was established by modeling three geological layers with different hydraulic and thermal properties to solve the above dilemma. The layers, elevation, and fault zones were simulated using interpolation functions from an artificial dataset. The coupled porous media flow and heat transfer problem using Darcy’s law, as well as heat transfer in porous media interfaces, were studied. The evolution of the flow field, hydrothermal performance, and temperature gradient were also analyzed for a period of 10 years. The results showed the recoverable thermal energy area gradually moved downwards during the 10-year simulation time. When the distance between the recharge well and the production well exceeded 200 m, the collection efficiency was significantly decreased. After 5 years of extraction, the power generation efficiency of the heat source will be less than 9.75%. These results effectively avoided the exploration cost of geothermal power plant site selection, which is significant for the efficiency improvement of geothermal energy.
As an important machine for energy conversion and fluid transmission, centrifugal pump has the advantages of high efficiency, reliable performance, and easy adjustment. In order to improve the stability of the pump, this article adopts the method of experimental and numerical simulation in the pump and studies the variation of the vibration characteristics in the operation process. Based on the numerical simulation results, the intake condition and the cavitation inside the centrifugal pump are analyzed and summarized, which reveals the flow attenuation mechanism of a pumping station. The main results of the work reported in this article are as follows: 1) Various experimental schemes to monitor the vibration of centrifugal pumps in real time have been designed. The vibration characteristics of the pumps have been significantly improved by adding special trash barriers. 2) The gas entering the pump was not enough to affect the normal operation of the pump, but cavitation did occur in the actual operation process. 3) The critical net positive suction head under the three conditions is calculated to be 8.9, 10.9, and 12.9 m, respectively.