Photovoltaic–thermal (PVT) technology is gaining popularity due to the diminishing availability of traditional fossil fuels and escalating environmental concerns. Enhancing the heat dissipation of PVT to improve its electrical and thermal performance remains a significant task. This study simulates the thermodynamic and heat transfer characteristics in multiple novel PVT structures by examining the impact of various factors such as collector materials, radiation intensity, mass flow rate, and inlet temperature. This work also identifies the optimal mass flow rate for locations with different solar radiation. The numerical results indicate that the electrical efficiency of a designed cylindrical structure has increased by 1.73% while the thermal efficiency has increased by 8.29%. Aluminum is identified as the most cost-effective material for the collector. The optimal mass flow rates in selected locations of Xining, Taiyuan, and Turpan are 0.36 kg/s, 0.35 kg/s, and 0.30 kg/s, respectively. The numerical results provide valuable insight into optimizing the design and operating conditions of PVT systems.
Geothermal power plants have become the main application that utilizes geothermal energy. The utilization of deep geothermal energy adheres great importance to the soil condition. One of the biggest challenges faced by geothermal power plant designers is to reduce the risk of soil exploration. To solve this problem, forecasting by modeling has proven to be an important tool to address the problem. In this research, a geo-model was established by modeling three geological layers with different hydraulic and thermal properties to solve the above dilemma. The layers, elevation, and fault zones were simulated using interpolation functions from an artificial dataset. The coupled porous media flow and heat transfer problem using Darcy’s law, as well as heat transfer in porous media interfaces, were studied. The evolution of the flow field, hydrothermal performance, and temperature gradient were also analyzed for a period of 10 years. The results showed the recoverable thermal energy area gradually moved downwards during the 10-year simulation time. When the distance between the recharge well and the production well exceeded 200 m, the collection efficiency was significantly decreased. After 5 years of extraction, the power generation efficiency of the heat source will be less than 9.75%. These results effectively avoided the exploration cost of geothermal power plant site selection, which is significant for the efficiency improvement of geothermal energy.
The structure of the guide vane centrifugal pump as turbine is complex, and the internal flow characteristics directly affect the energy loss distribution. The numerical method and entropy generation theory are used to analyze the energy loss distribution of each flow component of the guide vane centrifugal pump as turbine at different flow conditions. And the transient fluctuation law of hydraulic loss of passage component is also studied. The results show that the loss in the impeller accounts for 54%–58% under small flow conditions, and the loss in the guide vane accounts for 50%–61% under large flow conditions. The hydraulic loss of the impeller and guide vane is affected by the interaction between the impeller and guide vane, volute. And there are five obvious peaks and troughs in the 1/6 period. The primary and secondary frequencies of impeller hydraulic loss change with the flow rate. At the 0.57QBEP condition, the primary and secondary frequency of the impeller loss is blade frequency and 5 times blade frequency respectively, while the frequencies under the condition of 1.43QBEP are opposite. The primary and secondary frequencies of guide vane hydraulic loss are different under different flow conditions. The hydraulic loss of volute is mainly affected by the interference between the impeller and volute under various flow conditions, and the primary frequency is blade frequency.
High-speed centrifugal pumps are widely used in several industries due to their high efficiency and small footprint. In actual applications, there are issues such as low operational efficiency and a small high-efficiency flow interval; particularly, the leakage occurring in the impeller channel gap presents a significant barrier to the pump’s performance and stability. This study takes the fully open impeller miniature high-speed centrifugal pump as the object and uses a numerical simulation calculation method. The objective of this research endeavor is to analyze the effects of different flow conditions on a high-speed centrifugal pump’s external characteristics, flow field characteristics, and energy loss. The findings indicate that lobe top clearance exerts a substantial impact on the efficiency of high-speed centrifugal pumps. Increasing the lobe top clearance will result in a reduction in pump head and efficiency, particularly under high flow conditions. The lobe top clearance has a significant impact on the complexity of the flow in the impeller, particularly the flow close to the suction surface of the impeller, according to an analysis of the flow field characteristics. The energy loss analysis further confirms the importance of reducing lobe top clearance for improving pump performance and reducing energy loss. These results provide valuable guidance for optimizing centrifugal pump designs with lobe top clearance.
Visible-light photovoltaic (PV) inspection is affected by periodic grid-line backgrounds, low-contrast cracks, irregular crack topology, and the extreme aspect ratios of slender defects. To address these difficulties, a frequency-domain hybrid deformation and geometry-regression YOLO network, termed FHDG-YOLO, is proposed in this study. The method introduces frequency-domain dynamic decoupled convolution to attenuate periodic background responses, incorporates a high-resolution P2 detection head and efficient multi-scale attention to retain and recalibrate shallow spatial details, embeds DCNv2 to adapt convolutional sampling to irregular defect boundaries, and replaces the original regression loss with MicroShape-IoU for geometry-sensitive localization. Experiments are conducted on a reorganized two-class visible-light PV dataset containing 6493 images, comprising 6262 screened public images and 231 field images collected by the authors. On the 1300-image validation split, FHDG-YOLO obtains a Precision of 0.954, Recall of 0.943, mAP@0.5 of 0.971, and mAP@0.5:0.95 of 0.861. Compared with YOLOv8n, mAP@0.5 and mAP@0.5:0.95 increase by 3.6 and 6.9 percentage points, respectively. On the held-out 649-image test split, the corresponding mAP values are 0.970 and 0.860, compared with 0.931 and 0.785 for YOLOv8n. Under the original four-class Panel Solar validation protocol, FHDG-YOLO obtains mAP@0.5 and mAP@0.5:0.95 values of 0.954 and 0.843, compared with 0.929 and 0.780 for YOLOv8n.