Reflectance spectroscopy, like IR, VIS–NIR, combined with chemometric, has been widely used in plant leaf chemical analysis. But less studies have been made on the application of NIR reflectance spectroscopy to plant leaf color and pigments analysis and the possibility of using it for genetic breeding selection. Here, we examine the ability of NIR reflectance spectroscopy to determine the plant leaf color and chlorophyll content in Sassafras tzumu leaves and use the prediction results for genetic selection. Fresh and living tree leaves were used for NIR spectra collection, leaf color parameters (a*, b* and L*) and chlorophyll content were measured with standard analytical methods, partial least squares regression (PLSR) were used for model construction, the coefficient of determination (R2) [cross-validation ( $${\text{R}}^{2}_{\text{CV}}$$ ) and validation ( $${\text{R}}^{2}_{\text{V}}$$ )] and root mean square error (RMSE) [cross-validation (RMSECV) and validation (RMSEV)] were used for model performance evaluation, significant Multivariate Correlation algorithm was applied for model improvement, to find out the most important region related to the leaf color parameters and chlorophyll model, which have been simulated 100 times for accuracy estimation. Leaf color parameters (a*, b* and L*) and chlorophyll content were well predicted by NIR reflectance spectroscopy on fresh leaves in vivo. The mean $${\text{R}}^{2}_{\text{CV}}$$ and RMSECV of a*, b*, L* and chlorophyll content were (0.82, 4.43), (0.63, 3.72), (0.61, 2.35) and (0.86, 0.13%) respectively. Three most important NIR regions, including 1087, 1215 and 2219 nm, which were highly related to a*, b*, L* and chlorophyll content were found. NIR reflectance spectra technology can be successfully used for genetic breeding program. High heritability of a*, b*, L* and chlorophyll content (h2 = 0.77, 0.89, 0.78, 0.81 respectively) were estimated. Several families with bright red color or bright yellow color were selected. NIR spectroscopy is promising for the rapid prediction of leaf color and chlorophyll content of living fresh leaves. It has the ability to simultaneously measure multiple plant leaf traits, potentially allowing for quick and economic prediction in situ.

Drought is a climatic event that considerably impacts plant growth, reproduction and productivity. Toona sinensis is a tree species with high economic, edible and medicinal value, and has drought resistance. Thus, the objective of this study was to dynamically monitor the physiological indicators of T. sinensis in real time to ensure the selection of drought-resistant varieties of T. sinensis. In this study, we used near-infrared spectroscopy as a high-throughput method along with five preprocessing methods combined with four variable selection approaches to establish a cross-validated partial least squares regression model to establish the relationship between the near infrared reflectance spectroscopy (NIRS) spectrum and physiological characteristics (i.e., chlorophyll content and nitrogen content) of T. sinensis leaves. We also tested optimal model prediction for the dynamic changes in T. sinensis chlorophyll and nitrogen content under five separate watering regimes to mimic non-destructive and dynamic detection of plant leaf physiological changes. Among them, the accuracy of the chlorophyll content prediction model was as high as 72%, with root mean square error (RMSE) of 0.25, and the RPD index above 2.26. Ideal nitrogen content prediction model should have R² of 0.63, with RMSE of 0.87, and the RPD index of 1.12. The results showed that the PLSR model has a good prediction effect. Overall, under diverse drought stress treatments, the chlorophyll content of T. sinensis leaves showed a decreasing trend over time. Furthermore, the chlorophyll content was the most stable under the 75% field capacity treatment. However, the nitrogen content of the plant leaves was found to have a different and variable trend, with the greatest drop in content under the 10% field capacity treatment. This study showed that NIRS has great potential for analyzing chlorophyll nitrogen and other elements in plant leaf tissues in non-destructive dynamic monitoring.

Rapid and accurate plant growth and biomass estimation is essential for formulating and implementing targeted forest cultivation measures. In this study, RGB-D imaging technology was used to obtain the RGB and depth imaging data for a Toona sinensis seedling canopy to estimate plant growth and aboveground biomass (AGB). Three hundred T. sinensis seedlings from 20 varieties were planted under five different drought stress treatments. The U-Net model was applied first to achieve highly accurate segmentation of plants from complex backgrounds. Simple linear regression (SLR) was used for plant height prediction, and the other three models, including multivariate linear (ML), random forest (RF) and multilayer perceptron (MLP) regression, were applied to predict the AGB and compared for optimal model selection. The results showed that the SLR model yields promising and reliable results for the prediction of plant height, with R² and RMSE values of 0.72 and 1.89 cm, respectively. All three regression methods perform well in the prediction of AGB estimation. MLP yields the highest accuracy in predicting dry and fresh aboveground biomass compared to the other two regression models, with R² values of 0.77 and 0.83, respectively. The combination of Gray, Green minus red (GMR) and Excess green index (ExG) was identified as the key predictor by RReliefF for predicting dry AGB. GMR was the most important in predicting fresh AGB. This study demonstrated that the merits of RGB-D and machine learning models are effective phenotyping techniques for plant height and AGB prediction, and can be used to assist dynamic responses to drought stress for breeding selection.

Background: Wood basic density (WBD) is one of the most crucial wood property in tree and mainly determined the end use of wood for industry. However, the measurement WBD is time- and cost-consuming, which an alternatively fast and no-destructive measurement is needed. In this study, capability of NIR spectroscopy combined with partial least squares regression (PLSR) to quantify the WBD were examined in multiple wood species. To obtain more accurate and robust prediction models, the grain angle (0° (transverse surface), 45°, 90° (radial surface)) influence on the collection of solid wood spectra and a comparison of found variable selection methods for NIR spectral variables optimization were conducted, including significant Multivariate Correlation (sMC), Regularized elimination procedure (Rep), Iterative predictor weighting (Ipw) and Genetic algorithm (Ga). Models made by random calibration data selection were conducted 200 times performance evaluation. Results: These results indicate that 90° angle models display relatively highest efficiency than other angle models, mixed angle model yield a satisfied WBD prediction results as well and could reduce the influence of grain angle. Rep method shows a higher efficiency than other methods which could eliminate the uninformative variables and enhance the predictive performance of 90° angle and mix angle models. Conclusions: This study is potentially shown that the WBD (g/cm³) on solid wood across grain angles and varies wood species could be measured in a rapid and efficient way using NIR technology. Combined with the PLSR model, our methodology could serve as a tool for wood properties breeding and silviculture study.

Background: A fast, reliable and non-destructive method is needed to qualify the extractives content (EC) in heartwood of T. sinensis cores in the breeding program for studying the genetic effect on EC. However, the influence of grain angle on near infrared (NIR) spectra prediction model for EC is unclear. In this study, NIR spectra were collected from both cross section and radial section of wood core samples in order to predict the EC in heartwood. Results: The effect of grain angle on calibration EC model was studied. Several different spectra pre-processing methods were implemented for calibration. It was found that standard normal variation (SNV) followed by 1st derivative yielded the best calibration result for T. sinensis EC. Grain angle had a significant influence on the predicted model for EC when using the whole NIR spectra. However, after testing a certain point of the prior variables for EC that were selected by the significant multivariate correlation (sMC), the influence of grain angle was significantly eliminated. Conclusions: It is suggested that NIR spectroscopy is a promising method to predict EC in the solid wood without effecting grain angle.

BackgroundA fast and reliable non-destructive method for qualifying the content of extracts content (EC) in heartwood of T. sinensis cores is needed in the breeding program for studying the genetically infect on EC. However, the affecting of grain angle on near infrared (NIR) spectra prediction model for EC is unclear. In this study, NIR spectra were collected both from cross section and radial section of wood core samples in order to predict the EC in heartwood.ResultsThe effect of grain angle on calibration EC model was studied. Several different spectra pre-processing methods were tested for calibration. It was found that standard normal variation (SNV) followed by 1^st derivative yield the best calibration for EC. Grain angle has a significant influence on the predict model for EC when use the whole NIR spectra. However, after using the significant multivariate correlation (sMC) selection of the prior of wavenumbers for EC, the influence of grain angle have been significantly reduced. ConclusionsIt was suggested that NIR spectroscopy could be a promising methods to predict EC in solid wood without the infection of grain angle.