Atomic force microscopy (AFM) has been utilized for nanomechanical machining of various materials including polymers, metals, and semiconductors. Despite being important candidate materials for a wide range of applications including data storage and actuators, ferroelectric materials have rarely been machined via AFM. AFM-based machining of ferroelectric nanostructures offers advantages over established techniques, such as bottom-up approaches and focused ion beam milling, in select cases where low damage and low-cost modification of already-fabricated thin films are required. Through a systematic investigation of a broad range of AFM parameters, we demonstrate that AFM-based machining provides a low-cost option to rapidly modify local regions of the film, as well as fabricate a range of different nanostructures, including a nanocapacitor array with individually addressable ferroelectric elements.
5 April 2022 in ACS Applied Materials & Interfaces
Piezoelectric diphenylalanine peptide nanotubes (PNTs) have recently been demonstrated in energy harvesting applications, typically based on vertically aligned PNTs that generate charge when pressed. In this work, we use a wettability difference and an applied electric field to align PNTs and PNT-based composites on flexible substrates. Open-circuit voltages and short-circuit currents exceeding 6 V and 60 nA, respectively, are achieved by bending the substrate, opening up the use of horizontally aligned PNTs as flexible energy harvesting substrates.
When scaling the lateral size of a ferroelectric random access memory (FeRAM) device down to the nanometer range, the polarization switching-induced displacement current becomes small and challenging to detect, which greatly limits the storage density of FeRAM. Here, we report the observation of significantly enhanced injection currents, much larger than typical switching currents, induced by polarization switching in BiFeO3 thin films via conductive atomic force microscopy. Interestingly, this injected current can be effectively modulated by applying mechanical force. As the loading force increases from ∼50 to ∼750 nN, the magnitude of the injected current increases and the critical voltage to trigger the current injection decreases. Notably, changing the loading force by an order of magnitude increases the peak current by 2–3 orders of magnitude. The mechanically boosted injected current could be useful for the development of high-density FeRAM devices. The mechanical modulation of the injected current may be attributed to the mechanical force-induced changes in the barrier height and interfacial layer width.