LORENZO MILAN

Mr. LORENZO MILAN

Politecnico di Torino
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2022 in Geosciences
Verified
Journal Article
Open access
PDF file
Giulia TorselloGiulia Torsello
Giulia Torsello
GVGianmarco Vallero
Gianmarco Vallero
LORENZO MILANLORENZO MILAN
LORENZO MILAN
MBMonica Barbero
Monica Barbero
MCMarta Castelli
Marta Castelli
Rockfalls are widespread, rapid, and high-energy landslide phenomena that could potentially affect large portions of populated lands. The preliminary identification of the most rockfall-prone zones is a challenging task, especially in times of extreme and unpredictable climate change. Even slight environmental modifications can produce significant consequences in terms of exposure, hazard, and risk. Therefore, a timely risk assessment is paramount for territorial administrators to plan and prioritize adequate countermeasures. Risk assessment is crucial to guaranteeing the safety of human lives, the integrity of structures and infrastructures, the preservation of historic and environmental heritage, and the safeguard of economic activities. Hence, new and rapid evaluation methods for rockfall hazard, vulnerability, and risk are needed to identify the most critical areas where more indepth analyses aimed at the design of protective works should be carried out. This study proposes a quick, innovative, and completely GIS-based procedure to preliminarily assess rockfall time-independent hazard and risk in large areas. Propagation analysis is performed by integrating powerful QGIS plugin QPROTO, which can estimate rockfall energy within the invasion area in a simplified way, with the slope units polygons of the Italian territory for the definition of the input parameters. The quantification of risk was obtained by the application of the multidisciplinary IMIRILAND methodology, again within a free and open QGIS environment. Lastly, to test the capabilities of the method, the procedure was applied to a case study of the Sorba Valley (Piemonte, Italy), a tourist region in the northwestern Italian Alps. The findings offer an important contribution to the field of land-planning activities and risk-management strategies.

4 November 2022 in Geosciences
Verified
Journal Article
Open access
PDF file
MNMaria Lia Napoli
Maria Lia Napoli
LORENZO MILANLORENZO MILAN
LORENZO MILAN
MBMonica Barbero
Monica Barbero
EMEdmund Medley
Edmund Medley
Serious deficiencies in ground characterization, analysis and design at engineering works can occur when working with bimrocks (block-in-matrix rocks) and bimsoils (block-in-matrix soils). Since the 1990s, serious technical problems at engineering works performed in bimrocks/bimsoils spurred practical research, which revealed that the behavior of these geomaterials is directly related to the volumetric block proportions (VBPs). However, the way that VBPs can be confidently and correctly estimated remains an ongoing critical issue that still frustrates designers, contractors and owners. Stereological techniques can be applied to overcome this challenge by inferring 3D block contents from in situ 1D and 2D measurements, but the estimates have often been demonstrated to be erroneous. This paper presents findings from a computer-aided reinvestigation, revalidation and extension of Medley’s work of 1997 and subsequent researchers to provide approachable yet statistically robust methods to limit the uncertainty associated with estimates of 3D VBPs generated from 1D boring/scanline measurements. To this aim, a specialized Matlab code was created and virtual drilling programs were performed through 3D computer-generated bimrock models. Supported by extensive statistical-based investigations, a design chart is provided that updates and extends Medley’s 1999 chart relating uncertainty in estimates of VBP as a function of total boring/scanline lengths.

6 February 2025 in International Journal for Numerical and Analytical Methods in Geomechanics
Verified
Journal Article
Open access
LORENZO MILANLORENZO MILAN
LORENZO MILAN
MBMonica Barbero
Monica Barbero
MBMauro Borri‐Brunetto
Mauro Borri‐Brunetto
Spalling and rockburst are severe criticalities that can emerge while excavating deep tunnels in rock masses under heavy natural stress states. Here, rock brittle failure can induce massive releases of the energy stored during the excavation and dangerous projections of rock blocks into the opening. The prediction of rock brittle failure is therefore crucial and, for this purpose, different empirical brittleness indexes have been proposed in the past. However, many of them provide predictions that is often not consistent and/or truthful, as they do not consider the stress and energy variations induced in the rock mass by the excavation. This paper presents an innovative method to distinguish between ductile and brittle failure of rock around deep tunnels. The method is based on two mechanical models of rock damage that were formulated to describe brittle and ductile failure mechanisms within the rock mass, as induced by the stress release during the excavation. These models are integrated into the definition of a new brittleness index, named tunnel brittleness index (TBI). TBI quantifies the outcome of the competition between the two failure mechanisms, estimating the susceptibility of the rock mass to brittle failure. The effectiveness and the application of TBI are shown with reference to a real case study. Specifically, TBI appears as a promising and useful tool for engineers dealing with deep tunnel projects that may be employed for predicting brittle collapses in the early stages of the design, which would be crucial in the preliminary choice of excavation techniques and machinery, and the support systems.

15 December 2023 in Geosciences
Verified
Journal Article
Open access
PDF file
LORENZO MILANLORENZO MILAN
LORENZO MILAN
MNMaria Lia Napoli
Maria Lia Napoli
MBMonica Barbero
Monica Barbero
MCMarta Castelli
Marta Castelli
In this research article, we propose a practical methodology for evaluating the affecting potential of detachment areas in rockfalls. Our innovative approach combines an assessment of the visibility of rockfall source areas, with reference to specific rockfall scenarios and elements at risk, considering the rockfall Susceptibility Index to Failure (SIF) of these areas. The result is the characterization of source areas through a rockfall Source Affecting Index (SAI), which considers both the morphology of the slope and the geostructural conditions of the rock walls. This information can be very useful since it aids in optimizing more in-depth analyses, as well as the placement of monitoring instruments or stabilization systems. The proposed methodology has been implemented in the open-source software QGIS through the development of an easy-to-use plugin named Ranking of the Affecting Potential of Detachment Areas in Rockfalls, or “RADAR”. RADAR is designed to be used in conjunction with QPROTO, a well-known QGIS plugin for preliminary rockfall susceptibility/hazard analyses based on a visibility analysis and a simplified mechanical method. To demonstrate the effectiveness of the proposed approach, an application to a case study located in the Western Alps (Bardonecchia, Italy) is presented and discussed in the paper.

1 August 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
MBMarco Barla
Marco Barla
MBMonica Barbero
Monica Barbero
MBM Baralis
M Baralis
Alessandra InsanaAlessandra Insana
Alessandra Insana
LORENZO MILANLORENZO MILAN
LORENZO MILAN
LZL Zilli
L Zilli
The construction of motorways in Italy dates back to 1921 and still lasts today. Along them there is a large number of tunnels, many of which have been in service for more than 50 years and have experienced various levels of decay due to aging. An extensive assessment and inspection plan is taking place finalized to highlight situations where maintenance and repair works are needed to guarantee the continuation of service in safe conditions and functionality. Due to the number of tunnels, the need arises to classify them and define priorities for intervention on the basis of a first assessment and of a robust and scientific-based tool to orientate the investments. This paper describes the methodology that was developed by the Authors for this purpose, assessing the attention level of every tunnel. The method relies on a quantitative approach that allows quantifying the risk based on five risk factors composed of a number of relevant parameters. Their relative interaction, which guided the scores assigned to each parameter, was assessed by applying the Rock Engineering System [2]. A number of examples of existing tunnels are shown to illustrate the application of the method and to draw conclusions about its validity and reliability.

1 February 2022 in Geosciences
Verified
Journal Article
Open access
PDF file
MNMaria Lia Napoli
Maria Lia Napoli
LORENZO MILANLORENZO MILAN
LORENZO MILAN
MBMonica Barbero
Monica Barbero
CSClaudio Scavia
Claudio Scavia
Mélanges are heterogeneous geological deposits and represent the most widespread bimrock (block-in-matrix) formations. This paper presents the efforts undertaken to characterise an Italian mélange composed of a clayey-marly matrix enclosing strong calcareous blocks. Due to its low uniaxial compressive strength, this geomaterial can be classified as a soft rock. The weak nature of the marly matrix and its water sensitivity, as well as the presence of rock inclusions, made the collection and preparation of intact specimens extremely complex and time-consuming operations. The difficulties encountered during these phases are described in detail; the various non-conventional procedures considered and developed to overcome these problems are also presented. The potential of the solutions proposed lies in the fact that they can be conveniently applied to other soft rocks with a block-in-matrix internal arrangement, such as the Italian mélange. To characterise the Italian mélange, point load and uniaxial compressive tests were carried out. From the results of these tests, a conversion factor equal to 14 is proposed to correct the point load strength index in order to estimate the uniaxial compressive strength of soft rocks, such as the mélange under study. Moreover, to estimate local strains and the deformability of the geomaterial, the non-destructive digital image correlation technique was applied.