Max Horn

Mr. Max Horn

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2021 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
MSMatthias Schneck
Matthias Schneck
MHMax Horn
Max Horn
MSM. Schmitt
M. Schmitt
CSC. Seidel
C. Seidel
GSG. Schlick
G. Schlick
GRG. Reinhart
G. Reinhart
In this review paper, the authors investigate the state of technology for hybrid- and multi-material (MM) manufacturing of metals utilizing additive manufacturing, in particular powder bed fusion processes. The study consists of three parts, covering the material combinations, the MM deposition devices, and the implications in the process chain. The material analysis is clustered into 2D- and 3D-MM approaches. Based on the reviewed literature, the most utilized material combination is steel-copper, followed by fusing dissimilar steels. Second, the MM deposition devices are categorized into holohedral, nozzle-based as well as masked deposition concepts, and compared in terms of powder deposition rate, resolution, and manufacturing readiness level (MRL). As a third aspect, the implications in the process chain are investigated. Therefore, the design of MM parts and the data preparation for the production process are analyzed. Moreover, aspects for the reuse of powder and finalization of MM parts are discussed. Considering the design of MM parts, there are theoretical approaches, but specific parameter studies or use cases are not present in the literature. Principles for powder separation are identified for exemplary material combinations, but results for further finalization steps of MM parts have not been found. In conclusion, 3D-MM manufacturing has a MRL of 4–5, which indicates that the technology can be produced in a laboratory environment. According to this maturity, several aspects for serial MM parts need to be developed, but the potential of the technology has been demonstrated. Thus, the next important step is to identify lead applications, which benefit from MM manufacturing and hence foster the industrialization of these processes.

25 December 2021 in Metals
Verified
Journal Article
Open access
PDF file
MSMatthias Schneck
Matthias Schneck
MHMax Horn
Max Horn
MSMaik Schindler
Maik Schindler
CSChristian Seidel
Christian Seidel
Additive Manufacturing (AM) allows the manufacturing of functionally graded materials (FGM). This includes compositional grading, which enables the allocation of desired materials corresponding to local product requirements. An upcoming AM process for the creation of metal-based FGMs is laser-based powder bed fusion (PBF-LB/M) utilized for multi-material manufacturing (MM). Three-dimensional multi-material approaches for PBF-LB/M are stated to have a manufacturing readiness level (MRL) of 4 to 5. In this paper, an advancement of multi-material technology is presented by realizing an industry-relevant complex part as a prototype made by PBF-LB/M. Hence, a multi-material injection nozzle consisting of tool steel and a copper alloy was manufactured in a continuous PBF-LB/M process. Single material regions showed qualities similar to the ones resulting from mono-material processes. A geometrically defined transition zone between the two materials was achieved that showed slightly higher porosity than mono-material regions. Nevertheless, defects such as porosity, cracks, and material cross-contamination were detected and must be overcome in further MM technology development.

1 December 2025 in Nano Micro Mechanics Review
Verified
Journal Article
Closed access
TBThomas Bareth
Thomas Bareth
BRBjoern Ringel
Bjoern Ringel
VSVeronika Stapff
Veronika Stapff
MLMaja Lehmann
Maja Lehmann
MHMax Horn
Max Horn
CSChristian Seidel
Christian Seidel

7 August 2026 in Materials
Verified
Journal Article
Open access
PDF file
NANikolaos D. Alexopoulos
Nikolaos D. Alexopoulos
IGIOANNA GIAVROUTA
IOANNA GIAVROUTA
LALeonard Alberty
Leonard Alberty
MHMax Horn
Max Horn
IUIsmail Uensal
Ismail Uensal
GSGeorg Schlick
Georg Schlick
Cross-contamination during metal powder blending in multi-material laser powder bed fusion (PBF-LB/M) is a common production challenge and a key barrier to the wider industrial adoption of the process. In the present investigation, the effect of different CuCr1Zr foreign-particle cross-contamination rates of up to 5.0 wt.%, simulating different cross-contamination levels in an AlSi10Mg feedstock for PBF-LB/M, is examined. The resulting metallurgical features and tensile mechanical properties of the produced components were compared to those of reference specimens manufactured from uncontaminated powder. A microstructural analysis of CuCr1Zr contaminated samples revealed characteristic Cu-rich regions, demonstrating that the higher the level of cross-contamination is, the larger these regions are. Tensile yield stress is almost linearly increased with the contamination level while the opposite trend is noticed for tensile elongation at fracture. Two different stages of strain-hardening were noticed, with Stage I exhibiting a lower strain-hardening exponent, while higher strain-hardening exponents (>0.27) were noticed for Stage II, with the latter decreasing with increasing cross-contamination level. The tensile mechanical behaviour of PBF-LB/M specimens was evaluated for the first time with appropriate quality indices, which were initially developed for similar cast aluminium alloys. Overall, the quality index accounting for global tensile performance was decreased for all build directions with increasing cross-contamination level. Despite the lower quality index at the non-contamination level, the inclined (45°) printed specimens presented quality indices that were almost unaffected by the cross-contamination level.