jinyu Xu

jinyu Xu


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 December 2019 in Materials
Verified
Journal Article
Open access
PDF file
TWTengjiao Wang
Tengjiao Wang
JXjinyu Xu
jinyu Xu
CZCongjin Zhu
Congjin Zhu
HHHe Huang
He Huang
This study carried out tensile tests at definite elongation, tensile and shear tests on 4 admixture-modified styrene-acrylic emulsion-based cement composites (SECCs), and measured the strength, deformation, and energy consumption indexes of test specimens, so as to investigate the influences of coalescing agent, plasticizer, silane coupling agent, and nanometer aluminium oxide on the bond, tensile, and shear mechanical properties of the test specimens. Additionally, the Field Emission Scanning Electron Microscope (FE-SEM) test and Mercury Intrusion Porosimetry (MIP) test were conducted on the composite material specimens, to analyze the microscopic mechanism of different admixtures in modifying the mechanical properties of the SECC. The results suggested that the addition of coalescing agent, plasticizer, silane coupling agent, and nanometer aluminium oxide improved the bond, tensile and shear properties of the SECC specimens to various degrees. Of them, the coalescing agent promoted the mutual cross-linking of organic polymers with inorganic products, and optimized the transition interface to enhance the comprehensive mechanical properties of the test specimens; by contrast, nanometer aluminium oxide developed secondary hydration reaction with the inorganic products, and refined the pore structure to modify the mechanical properties of test specimens. Therefore, both of them achieved significant modification effects. Typically, the optimal bond properties of FFAMC, PLMC, SCAMC, and NAMC test specimens were achieved at the coalescing agent, plasticizer, silane coupling agent, and nanometer aluminium oxide addition amounts of 4%, 1.5%, 3%, and 1%, respectively. Besides, the improving effects of different admixtures on the tensile property of SECC specimens followed the order of coalescing agent > nanometer aluminium oxide > plasticizer > silane coupling agent, with the optimal addition amounts of 4%, 1.5%, 1%, and 2%, respectively. In addition, the improving effects of different admixtures on the shear performance of SECC specimens followed the order of coalescing agent > nanometer aluminium oxide > silane coupling agent > plasticizer, with the optimal addition amounts of 4%, 1.5%, 1%, and 1%, respectively.

1 February 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
WXWei Xia
Wei Xia
JXjinyu Xu
jinyu Xu
LNLiangxue Nie
Liangxue Nie
ZWZhihang Wang
Zhihang Wang
ZHZhe Huang
Zhe Huang
GLGaojie Liu
Gaojie Liu
The dynamic splitting tensile tests of carbon nanofibers reinforced concrete (CNFC) with fiber volume content of 0%, 0.1%, 0.2%, 0.3% and 0.5% were carried out respectively by split Hopkinson pressure bar (SHPB) test device. Based on the internal relationship between the dynamic splitting tensile dissipative energy and the change rate of incident wave energy, the dissipative energy properties of CNFC were analyzed. The results show that: the total energy of incident wave, reflected wave and transmitted wave changes in a similar way with time, which is a cumulative process, with the increase of the change rate of incident wave energy, the dissipative energy of concrete also increases gradually, and the two basically show a linear growth trend; the addition of CNFs has a significant promoting effect on the dissipative energy of concrete, with the increase of the content of CNFs, the enhancement effect of CNFs on the dissipative energy shows a trend of first strengthening and then weakening, with the optimal content of 0.3%.