Marta Słowik

Prof. Dr. Marta Słowik

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 October 2018 in Archive of Applied Mechanics
Verified
Journal Article
Open access
PDF file
MSMarta Słowik
Marta Słowik
In this paper the analysis of failure and crack development in beams made of concrete is presented. The analysis was carried out on the basis of the performed experimental investigation and numerical simulations. A fictitious crack model based on nonlinear fracture mechanics was applied to investigate the development of strain softening of tensile concrete in plain concrete and slightly reinforced concrete beams. The role of strain softening was also discussed according to the inclined crack propagation in highly reinforced concrete beams. The analysis has brought the evidence that the mode of failure in flexural beams varies according to a longitudinal reinforcement ratio. A brittle failure due to the formation of a flexural crack takes place in plain and slightly reinforced concrete beams, and strain softening of tensile concrete is of paramount importance at failure crack initiation and propagation. A stable growth of numerous flexural cracks is possible in moderately reinforced concrete beams, and then the load carrying capacity is connected with reaching the yield stress of reinforcing steel or concrete crushing in the compression zone. In higher reinforced concrete beams without transverse reinforcement, brittle failure can take place due to shear forces and the development of diagonal cracks. However, strain softening of tensile concrete is not the only mechanism influencing the propagation of an inclined crack. Such mechanisms as aggregate interlock and dowel action of steel bars contribute more importantly to the development of failure crack.

1 January 2014 in Procedia Materials Science
Verified
Journal Article
Open access
MSMarta Słowik
Marta Słowik
The aim of the paper is to investigate the shear failure mechanism and shear capacity in longitudinally reinforced concrete beams without transverse reinforcement. It has been found that the shear span-to-depth ratio and a beam size are important parameters which significantly affect the failure mode in the investigated members. The “size effect”, which is described in professional literature as a decrease of shear strength with the increase of the members depth, is not evaluated sufficiently enough. The effective length-to-depth ratio which has been identified in this paper, also has a considerable influence on the contributions of the shear resistance mechanism and thus the ultimate shear capacity. In the paper it has been shown that members characterized by the same shear span-to depth ratio but different effective length-to-depth ratio can fail in a different way

1 November 2012 in Computational Materials Science
Verified
Journal Article
Closed access
MSMarta Słowik
Marta Słowik
Piotr SmarzewskiPiotr Smarzewski
Piotr Smarzewski

1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
ISIzabela Skrzypczak
Izabela Skrzypczak
MSMarta Słowik
Marta Słowik
LBLidia Buda-Ożóg
Lidia Buda-Ożóg

1 February 2012 in Computational Materials Science
Verified
Journal Article
Closed access
MSMarta Słowik
Marta Słowik
TNTomasz Nowicki
Tomasz Nowicki

29 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
MSMarta Słowik
Marta Słowik
AAAmanda Akram
Amanda Akram
Tensile strength of concrete is the basic property when estimating the cracking resistance of the structure and when analysing fracture processes in concrete. The most common way of testing tensile strength is the Brazilian method. It has been noticed that the shape and size of specimens influence the tensile splitting strength. The experiments were performed to investigate the impact of cylinder’s length on tensile concrete strength received in the Brazilian method. During the experiment the tensile concrete strength was tested on two different sizes cylindrical specimens: 150 mm × 150 mm and 150 mm × 300 mm. Experiments were performed in two stages, with two types of maximum aggregate size: 16 mm and 22 mm. The software “Statistica” was used to perform the broad scale statistical analysis. When comparing test results for shorter and longer specimens, the increase of tensile splitting strength tested on shorter cylinders was observed (approximately 5%). However, when performing deeper statistical analysis, it has been found that the length effect was not sensitive to the strength of the cement matrix and the type of aggregate but was influenced by the aggregate size. Further experiments are needed in order to perform a multi-parameter statistical analysis of scale effect when testing the splitting tensile strength of concrete.