In this work, the heat transfer characteristics of supercritical pressure CO2 in vertical heating tube with 10 mm inner diameter under high mass flux were investigated by using an SST k-ω turbulent model. The influences of inlet temperature, heat flux, mass flux, buoyancy and flow acceleration on the heat transfer of supercritical pressure CO2 were discussed. Our results show that the buoyancy and flow acceleration effect based on single phase fluid assumption fail to explain the current simulation results. Here, supercritical pseudo-boiling theory is introduced to deal with heat transfer of scCO2. scCO2 is treated to have a heterogeneous structure consisting of vapor-like fluid and liquid-like fluid. A physical model of scCO2 heat transfer in vertical heating tube was established containing a gas-like layer near the wall and a liquid-like fluid layer. Detailed distribution of thermophysical properties and turbulence in radial direction show that scCO2 heat transfer is greatly affected by the thickness of gas-like film, thermal properties of gas-like film and turbulent kinetic energy in the near-wall region. Buoyancy parameters Bu < 10−5, Bu* < 5.6 × 10−7 and flow acceleration parameter Kv < 3 × 10−6 in this paper, which indicate that buoyancy effect and flow acceleration effect has no influence on heat transfer of scCO2 under high mass fluxes. This work successfully explains the heat transfer mechanism of supercritical fluid under high mass flux.
Tangential leakage loss is the primary factor that significantly affects the output performance of oil-free scroll expanders. A scroll expander can function under different operating conditions, and the flow of tangential leakage and generation mechanism is different. This study employed computational fluid dynamics to investigate the unsteady flow characteristics of the tangential leakage flow of a scroll expander with air as the working fluid. Consequently, the effects of different radial gap sizes, rotational speeds, inlet pressures, and temperatures on the tangential leakage were discussed. The tangential leakage decreased with increases in the scroll expander rotational speed, inlet pressure, and temperature, and decreased with decrease in radial clearance. With an equal-proportional increase in radial clearance, the flow form of the gas in the first expansion and back-pressure chambers became more complicated; when the radial clearance increased from 0.2 to 0.5 mm, the volumetric efficiency of the scroll expander decreased by approximately 5.0521%. Moreover, because of the large radial clearance, the tangential leakage flow maintained a subsonic flow. Further, the tangential leakage decreased with increase in rotational speed, and when the rotational speed increased from 2000 to 5000 r/min, the volumetric efficiency increased by approximately 8.7565%.
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and microstructure examination of A356 aluminum alloy indicated that dynamic recrystallization occurred during the isothermal compression. A physical dynamic recrystallization model based on the Arrhenius equation was developed, and this model can accurately predict the dynamic recrystallization fraction of A356 aluminum alloy during the isothermal compression. Finally, this model was implemented in FEM software Forge, and the microstructure evolution was simulated well.
21 January 2026 in The Journal of Supercritical Fluids
In this paper, a mathematical and physical model is established to study the convective heat transfer performance of supercritical carbon dioxide (SCO2) in three kinds of horizontal semicircular channels (uniform cross-sectional channel, diverging and converging channels). The accuracy of the numerical model is verified by comparing with the experimental data. The computational results demonstrate that the converging channel can strengthen heat transfer effectively compared with the uniform cross-sectional channel under the same heat transfer area. In the range of calculated working conditions, the use of a converging channel resulted in a maximum improvement of 42.26% in the heat transfer performance of SCO2. However, the diverging channel deteriorates the heat transfer. It is discovered that the improvement of the field coordination of SCO2 in the converging channel is one of the main reasons for its enhanced heat transfer. In addition, the different distribution of turbulent kinetic energy and thermal conductivity are also an important factor affecting the heat transfer performance of SCO2 in different channels. Finally, we propose a new heat transfer correlation of the SCO2 cooling process in the horizontal semicircular converging channel. Compared with the five selected correlations, the new correlation has the best prediction accuracy, and its mean absolute relative error (MARE) and root mean square error (RMSE) are 9.49% and 10.6%, respectively. Our work will provide new insights and theoretical guidance for the design and optimization of coolers in SCO2 Brayton cycle system.