25CrMo4 steel is widely used in the manufacturing of high-speed train axles due to its excellent mechanical properties. The purpose of this study is to develop an accurate modified constitutive model to describe the hot deformation behavior of the steel. Isothermal compression experiments were performed at different strain rates (0.01, 0.1, 0.5, and 1 s−1) and different temperatures (950, 1000, 1050, and 1100 °C) using a Gleeble-3800 thermal simulator. The microstructure after hot deformation was observed by the electron backscatter diffraction (EBSD), and the effects of temperature and strain rate were analyzed. The results showed that the coupling effect of temperature and strain rate on the dislocation density led to the change in the shape of the true stress–strain curve and that dynamic recovery (DRV) and dynamic recrystallization (DRX) caused the macroscopic softening phenomenon, with DRX being the main mechanism. Based on the true stress–strain curves, the strain-compensated Arrhenius constitutive model was calibrated. To improve prediction ability, a modified Arrhenius constitutive model was proposed, in which the temperature and strain rate coupling correction functions were incorporated. The original, modified Arrhenius models were evaluated according to the absolute relative error (ARE), the average absolute relative error (AARE), and the correlation coefficient (R2). Compared with the original model, the modified Arrhenius model has a higher prediction accuracy, with the ARE value mostly below 4%, the AARE value of 1.91%, and the R2 value of 0.9958.
10 November 2022 in International Journal of Material Forming
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and microstructure examination of A356 aluminum alloy indicated that dynamic recrystallization occurred during the isothermal compression. A physical dynamic recrystallization model based on the Arrhenius equation was developed, and this model can accurately predict the dynamic recrystallization fraction of A356 aluminum alloy during the isothermal compression. Finally, this model was implemented in FEM software Forge, and the microstructure evolution was simulated well.
23 January 2022 in The International Journal of Advanced Manufacturing Technology
Tube hydroforming (THF) technology is widely applied especially in the automotive and aircraft industries. Material characteristics of tubular workpieces should be evaluated in terms of bending and THF processes. A mathematical model, which combines the assumption of the elliptical contour of a bulged wall and the prediction equation of wall thickness, was designed to analyze the THF process and to obtain the strain–stress relationship of tubes. Material characteristics of a DC04-welded tube were obtained by using a self-designed THF test machine. Considering the effects of pre-work hardening, the material strain–stress relationships of the tube and original sheet blank were discussed. An approximate determination method was proposed to obtain the stress–strain curve of the tube by using the curve of the original sheet blank and the hardness of the tube and sheet blank. A suitable constitutive equation with pre-work hardening was applied to the DC04-welded tubes through simulation and experimental methods.
The low productivity and high cost of additive manufacturing techniques, such as powder bed fusion (PBF), limits its wide application in industry. A combined approach of hot isostatic pressing (HIP) and PBF was an effective means to solve this limitation. Nevertheless, there is currently a lack of a porosity closure model to design and optimize the HIP process parameters of PBF-manufactured components. The porosity closure condition of the PBF-manufactured component is deduced based on the additivity of logarithmic strain and the plastic equation of volume compressible material, and then a porosity closure model considering temperature and pressure is established and verified by molecular dynamics simulation. Subsequently, a HIP diagram of the PBF-manufactured IN718 is constructed. Four different initial relative densities of 0.956, 0.970, 0.984, and 0.996 of IN718 components are introduced by increasing the scanning speed of PBF. HIP post-treatment experiments of different relative density components are performed. The accuracy of the HIP diagram is verified by the relative density test and microstructure observation.