In this study, the synthesis of SiO₂–CaO–P₂O₅–MgO-SrO bioactive glass was performed by the sol-gel method. Sol-gel-derived bioactive glass material was produced both in powder and in discs form by uniaxial pressing, followed by sintering at 700°C. The obtained material was evaluated by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM). Cytocompatibility of ionic products of the bioactive glass were assessed using MTT assay and direct contact test. The surface reactivity of the resultant bioactive glass specimens was analyzed by immersion studies in simulated body fluid (SBF) for different time intervals while monitoring the concentration of silicon, calcium, phosphorus, strontium, and magnesium in the SBF medium. The SEM, XRD, and FTIR studies were conducted before and after soaking of the material in SBF. At first, an amorphous calcium phosphate was formed; after 7 days this surface consisted of deposited crystalline apatite. In vitro experiments with human osteosarcoma cell lines (MG-63) indicated that bioactive glass incorporating a limited amount of magnesium and strontium in the composition stimulates bone cell production of alkaline phosphatase. Finally, this material proved to be non-toxic and compatible for the proposed work in segmental defects in the goat model in vivo.

In this study, we prepared and evaluated hydroxyapatite–gelatin/curcumin nanofibrous composites and determined their antimicrobial effects against Escherichia coli, Staphylococcus aureus, and Streptococcus mutans. Hydroxyapatite–gelatin/curcumin nanofibrous composites were prepared by the electrospinning method. The prepared nanocomposites were then subjected to physicochemical studies by the light scattering method for their particle size, Fourier transmission infrared spectroscopy (FTIR) to identify their functional groups, X-ray diffraction (XRD) to study their crystallinity, and scanning electron microscopy (SEM) to study their morphology. For the microbial evaluation of nanocomposites, the disk diffusion method was used against Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the nanofibers were uniform in shape without any bead (structural defects). The release pattern of curcumin from the nanocomposite was a two-stage release, 60% of which was released in the first two days and the rest being slowly released until the 14th day. The results of the microbial evaluations showed that the nanocomposites had significant antimicrobial effects against all bacteria (p = 0.0086). It seems that these nanocomposites can be used in dental tissue engineering or as other dental materials. Also, according to the appropriate microbial results, these plant antimicrobials can be used instead of chemical antimicrobials, or along with them, to reduce bacterial resistance.

Propolis has traditionally been used in curing infections and healing wounds and burns. Current researches have shown that propolis has antibacterial, antifungal and antiviral actions however, the pharmacological activity of propolis is highly variable depending on its geographic origin. There have been few studies on the effects of Iranian propolis on the oral microorganisms. In this in-vitro study, the antimicrobial activity of the ethanolic and water extracts of the Iranian propolis (10%, w/v) from north-east area of Tehran was evaluated. Susceptibility of the oral strains tested (Streptococcus mutans ATCC 35668; Streptococcus salivarius ATCC 9222; Staphylococcus aureus ATCC 25923; Enterococcus faecalis ATCC 9854 and Lactobacillus casei ATCC 39392) was evaluated using the agar diffusion method at a concentration of 20 mg/mL of propolis and the zones of growth inhibition were measured. Antibacterial activity was determined by using minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) at different concentrations of propolis. The ethanolic extract showed bacteriostatic and bactericidal activity against all the strains, with MIC and MBC ranges of 250-500 µg/mL. The MIC concentration of the water extract was 500 µg/mL against S. mutans and E. faecalis. The water extract showed bactericidal activity only against S. mutans (20 mg/mL). These results indicate that the ethanolic extract is probably more useful in the control of oral biofilms and subsequent dental caries development. However, to determine the consequence of the ethanolic extract of Iranian propolis on the oral mucosa, in-vivo studies of its possible effects are needed.

This study was conducted to investigate the effect of adding silica nanoparticles on the physicochemical properties, antimicrobial action, and the hardness of dental stone type 4. Dental stone type 4 powder was physically mixed with nanoparticle powder at weight percentages (0, 0.5, 1, and 2 percent). The required amount of powder was added to water according to the manufacturer's instructions. The prepared set materials were subjected to the physicochemical studies; Fourier transmission infrared spectroscopy (FTIR) was taken up to investigate the functional groups and X‐ray diffraction (XRD) was used to evaluate the crystallinity. Also, scanning electron microscopy (SEM) was used to examine the morphology of the prepared samples. Agar diffusion test was carried out for the prepared samples against the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) to test the average growth inhibition zones. Finally, the Vickers surface hardness test was performed for each group using a hardness tester. The adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.05). The results showed that adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.0001). There was a significant difference between all groups and the 0% group in both bacteria (p < 0.0001). Besides, the adding of silica nanoparticles to dental stone type 4 increased the surface hardness significantly (p = 0.0057) without any effect on physicochemical properties. The 0% and the 0.5% groups had significant differences with the 2% group (p = 0.0046 and p = 0.0205 respectively). Then, at least 2% silica nanoparticles are needed for a significant increase. Clinical trials are needed to enlarge for dental stone type 4 containing silica nanoparticles in the future.

It seems quite challenging in tissue engineering to synthesize a base material with a range of essential activities, including biocompatibility, nontoxicity, and antimicrobial activities. Various types of materials are synthesized to solve the problem. This study aimed to provide the latest relevant information for practitioners about antibacterial scaffolds in dental tissue engineering. The PubMed search engine was used to review the relevant studies with a combination of the following terms as search queries: tissue engineering, scaffolds, antimicrobial, dentistry, dental stem cells, and oral diseases. It is noteworthy to state that only the terms related to tissue engineering in dentistry were considered. The antimicrobial scaffolds support the local tissue regeneration and prevent adverse inflammatory reactions; however, not all scaffolds have such positive characteristics. To resolve this potential defect, different antimicrobial agents are used during the synthesis process. Innovative methods in guided tissue engineering are actively working towards new ways to control oral and periodontal diseases.

The physicochemical, antibacterial, and mechanical properties of the cement used in fixed dental prostheses show particular importance in the successful treatment. The objective of this in vitro study was to prepare glass ionomer cements (GIC) containing curcumin nanocrystals, as a sealant between the prepared tooth and crown. The prepared cements containing curcumin nanocrystals with concentration of 20% and 30% were evaluated by conventional physicochemical methods, and then, the effects of adding nanocrystals on the cement water solubility and sorption were measured. Finally, the antibacterial effects of the prepared cement were evaluated against three bacterial strains of Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the solubility and sorption of both GIC containing curcumin nanocrystals did not change significantly compared with the control (p > 0.05). The cement containing 20% and 30% curcumin nanocrystals showed significant increase in antibacterial effect (p < 0.05). Considering the suitable physicochemical properties and worthy antibacterial result GIC containing curcumin nanocrystals, it seems that it can be a suitable restorative material.