Background. Porphyromonas gingivalis (P. gingivalis) has always been one of the leading causes of periodontal disease, and antibiotics are commonly used to control it. Numerous side effects of synthetic drugs, as well as the spread of drug resistance, have led to a tendency toward using natural antimicrobials, such as curcumin. The present study aimed to prepare and physicochemically characterize curcumin-loaded silica nanoparticles and to detect their antimicrobial effects on P. gingivalis. Methods. Curcumin-loaded silica nanoparticles were prepared using the chemical precipitation method and then were characterized using conventional methods (properties such as the particle size, drug loading percentage, and release pattern). P. gingivalis was isolated from one patient with chronic periodontal diseases. The patient’s gingival crevice fluid was sampled using sterile filter paper and was transferred to the microbiology laboratory in less than 30 min. The disk diffusion method was used to determine the sensitivity of clinically isolated P. gingivalis to curcumin-loaded silica nanoparticles. SPSS software, version 20, was used to compare the data between groups with a p value of <0.05 as the level of significance. Then, one-way ANOVA testing was utilized to compare the groups. Results. The curcumin-loaded silica nanoparticles showed a nanometric size and a drug loading percentage of 68% for curcumin. The nanoparticles had a mesoporous structure and rod-shaped morphology. They showed a relatively rapid release pattern in the first 5 days. The release of the drug from the nanoparticles continued slowly until the 45th day. The results of in vitro antimicrobial tests showed that P. gingivalis was sensitive to the curcumin-loaded silica nanoparticles at concentrations of 50, 25, 12.5, and 6.25 µg/mL. One-way ANOVA showed that there was a significant difference between the mean growth inhibition zone, and the concentration of 50 µg/mL showed the highest inhibition zone (p ≤ 0.05). Conclusion. Based on the obtained results, it can be concluded that the local nanocurcumin application for periodontal disease and implant-related infections can be considered a promising method for the near future in dentistry.

Regarding the importance of preventing peri-implantitis in dental implants, the current study aimed to coat a healing abutment with gelatin–curcumin nanocomposites, and the stability of this coating on the healing abutment was evaluated. A cell viability measuring test was used to determine the cytotoxicity of nanocomposites against dental pulp stem cells. To show the pattern of curcumin release from nanocomposites, drug dissolution apparatus two was applied. Then, 16 healing abutments were examined in vitro. Titanium healing abutments were coated with the gelatin–curcumin nanocomposite. The dip coating method was applied for coating and the consistency of coated cases was evaluated at intervals of one, 30, and 60 days after coating inside the simulated body fluid (SBF) solution. A scanning electron microscope (SEM) was used for investigating the microstructure and morphology of coatings, and an energy dispersive X-ray (EDX) was applied for determining the combination of the coating. Moreover, the healings were weighed before and after coating via an accurate digital scale with an accuracy of 0.0001. Finally, the data were analyzed using SPSS software. The prepared nanocomposite was non-cytotoxic against tested cells. The nanocomposite showed a relatively rapid release pattern in the first 10 days for curcumin. The release of curcumin from the nanoparticles continued slowly until the 30th day. The weight changes were statistically significant (p-value < 0.001) during this time. Based on the post hoc test, the weight between two times immediately after coating and 30 days after coating, and also one day after coating and 30 days after coating, was statistically insignificant. The results revealed that the coating of the gelatin–curcumin nanocomposite on the healing was successful and this consistency was kept for at least one month. It is necessary to investigate more evaluations in different fields of physicochemical, mechanical, and antimicrobial aspects for coated healing abutments.

This study was conducted to investigate the effect of adding silica nanoparticles on the physicochemical properties, antimicrobial action, and the hardness of dental stone type 4. Dental stone type 4 powder was physically mixed with nanoparticle powder at weight percentages (0, 0.5, 1, and 2 percent). The required amount of powder was added to water according to the manufacturer's instructions. The prepared set materials were subjected to the physicochemical studies; Fourier transmission infrared spectroscopy (FTIR) was taken up to investigate the functional groups and X‐ray diffraction (XRD) was used to evaluate the crystallinity. Also, scanning electron microscopy (SEM) was used to examine the morphology of the prepared samples. Agar diffusion test was carried out for the prepared samples against the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) to test the average growth inhibition zones. Finally, the Vickers surface hardness test was performed for each group using a hardness tester. The adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.05). The results showed that adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.0001). There was a significant difference between all groups and the 0% group in both bacteria (p < 0.0001). Besides, the adding of silica nanoparticles to dental stone type 4 increased the surface hardness significantly (p = 0.0057) without any effect on physicochemical properties. The 0% and the 0.5% groups had significant differences with the 2% group (p = 0.0046 and p = 0.0205 respectively). Then, at least 2% silica nanoparticles are needed for a significant increase. Clinical trials are needed to enlarge for dental stone type 4 containing silica nanoparticles in the future.

Background. Continuing assessment of the quality of evaluation programs promotes the quality of exams and ensures learners’ accurate evaluation. This study aimed to examine the quality of the competency-based evaluation program for dentistry based on the context, input, process, and product (CIPP) model. Methods. In a mixed-methods study (quantitative-qualitative), dentistry students’ evaluation program using competency-based assessment methods was examined by dentistry professors based on the CIPP model and via a reliable and valid researcher-made questionnaire. The questionnaire had three sections on demographic information, evaluation questions, and open-ended questions. Descriptive statistics (mean and SD) were used to analyze the questionnaire items. Open-ended questions were analyzed by content analysis, and the quantitative part was analyzed using SPSS. Results. Twenty-five faculty members from the departments of orthodontics and dental prosthesis completed the questionnaires. The overall level of faculty members’ satisfaction with the new evaluation program was above average (54±17.02). They had the highest degree of satisfaction with output indices and the lowest degree with input indices. The analysis of the open-ended questions yielded two general categories of "providing the human and physical infrastructure" and "spiritual support and encouragement of educational innovation." Conclusion. The competency-based evaluation program needs the support of managers and planners. The faculty should provide the infrastructure for the implementation of these methods. By meeting the requirements, the professors will be motivated to implement these methods, and the paradigm can shift from traditional to novel evaluation methods.

The physicochemical, antibacterial, and mechanical properties of the cement used in fixed dental prostheses show particular importance in the successful treatment. The objective of this in vitro study was to prepare glass ionomer cements (GIC) containing curcumin nanocrystals, as a sealant between the prepared tooth and crown. The prepared cements containing curcumin nanocrystals with concentration of 20% and 30% were evaluated by conventional physicochemical methods, and then, the effects of adding nanocrystals on the cement water solubility and sorption were measured. Finally, the antibacterial effects of the prepared cement were evaluated against three bacterial strains of Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the solubility and sorption of both GIC containing curcumin nanocrystals did not change significantly compared with the control (p > 0.05). The cement containing 20% and 30% curcumin nanocrystals showed significant increase in antibacterial effect (p < 0.05). Considering the suitable physicochemical properties and worthy antibacterial result GIC containing curcumin nanocrystals, it seems that it can be a suitable restorative material.

Objectives. The impression-taking technique is one of the most critical factors that not only prevents the shrinkage caused by polymerization but also enhances the accuracy of implant impressions. Also, choosing the right time of taking impressions after splinting implants is one of the important criteria that affects the impression-taking technique. Accordingly, the present study aimed to evaluate the accuracy of different splint methods for implant impressions made at different times. Methods. In this in vitro study, a two-piece metallic index was prepared, and the patients jaw was simulated by placing self-cured acrylic resin in the lower part of the index. Then, two holes were made in the acrylic resin at a specific distance from each other, and the analogs were placed in these holes. Splinting of impression copings was carried out with autopolymerized acrylic resin (GC Pattern resin LS, GC America Inc., USA), and an open tray impression approach was performed. Thirty-six casts in three groups (n=12) were fabricated from the acrylic model. After scanning the casts, the impression accuracy was compared between the three study groups by measuring the distance between the outer portions of the scan bodies screw-retained on implant analogs inside the cast using the Exocad software (2015.07 version). Group 1: splinting impression copings with autopolymerized acrylic resin and impression making immediately after the setting time (4 minutes); group 2: splinting and impression procedure after 17 minutes with splint sectioning and reconnection; group 3: splinting and impression procedure after 24 hours with splint sectioning and reconnection. The data were analyzed using SPSS 17 using the KruskalWallis test. Results. The mean distance measured in group 1 was 19.14±0.029mm, which was significantly lower than the main model. The distances were 19.15±0.039 and 19.159±0.33mm in groups 2 and 3, respectively. These two groups were not significantly different from the main model. Moreover, the mean distance measured in the three impression techniques was similar. Conclusions. There was no significant difference in the measurements between group 2, group 3, and the main model. Therefore, dentists can make an impression after 17 minutes to reduce chair time.