Francesco Sciatti

Dr. Francesco Sciatti

Polytechnic of Bari, Italy
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2024 in Heliyon
Verified
Journal Article
Open access
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
PTPaolo Tamburrano
Paolo Tamburrano
EDElia Distaso
Elia Distaso
RARiccardo Amirante
Riccardo Amirante
Despite the great advantages it offers, such as high-power density, precise control and large force output, conventional hydraulic valve control suffers from low energy efficiency due to substantial energy losses that occurs as the pressurized oil flows through the hydraulic circuit and its components, particularly the control-ones. Conventional hydraulic technology typically utilizes analogue spool valves, such as proportional and servovalves, as control components in various industrial and aeronautical applications where high precision and fast response are required. However, the use of these valves leads to high power dissipation, caused by the significant pressure drop across the small narrow passages uncovered during valve control. To maintain the relevance of hydraulic technology across industries, researchers are investigating a novel research field, also referred to as digital hydraulic technology. By using some digital concepts into hydraulic technology, the goal of this innovative research field is to replace conventional analogue spool valves with robust and low-cost digital On/Off valves, thus minimizing power losses and enhancing the overall efficiency of hydraulic systems. This paper presents a thorough review of the research advancements in digital hydraulic technology, with a specific focus on valve control. Firstly, the standard definition of digital hydraulic technology and its two main categories are introduced. Then, the operating principles and the digital approaches used to control digital hydraulic valves are examined. Afterwards, the digital hydraulic valve architectures developed over the years are reviewed, along with an in-depth analysis of their performance. Finally, the potential application scenarios, advantages and challenges with digital hydraulic valves are explored, highlighting potential areas for future research and development.

16 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Paolo TamburranoPaolo Tamburrano
Paolo Tamburrano
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
Elia DistasoElia Distaso
Elia Distaso
LLLuigi Di Lorenzo
Luigi Di Lorenzo
Riccardo AmiranteRiccardo Amirante
Riccardo Amirante
Mechanical ventilators are vital components of critical care services for patients with severe acute respiratory failure. In particular, pressure- and volume-controlled mechanical ventilation systems are the typical modes used in intensive care units (ICUs) to ventilate patients who cannot breathe adequately on their own. In this paper, a Simulink model is proposed to simulate these two typical modes employed in intensive care lung ventilators. Firstly, these two modes of ventilation are described in detail in the present paper. Secondly, the suggested Simulink model is analysed: it consists of using well-established subroutines already present in Simulink through the Simscape Fluids (gas) library, to simulate all the pneumatic components employed in some commercial ICU ventilators, such as pressure reducing valves, pressure relief valves, check valves, tanks, ON\OFF and proportional directional valves, etc. Finally, the simulation results of both modes in terms of pressure, tidal volume, and inspired/expired flow are compared with the real-life quantitative trends taken from previously recorded real-life experiments in order to validate the Simulink model. The accuracy of the model is high, as the numerical predictions are in good agreement with the real-life data, the percentage error being less than 10% in most comparisons. In this way, the model can easily be used by manufacturers and start-ups in order to produce new mechanical ventilators in the shortest time possible. Moreover, it can also be used by doctors and trainees to evaluate how the mechanical ventilator responds to different patients.

1 December 2023 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
PTPaolo Tamburrano
Paolo Tamburrano
EDElia Distaso
Elia Distaso
RARiccardo Amirante
Riccardo Amirante
Digital hydraulic technology has emerged as a promising alternative to conventional hydraulic systems, offering several advantages such as improved energy efficiency, more precise control, and reduced complexity. In recent years, digital hydraulic technology applications have been widely researched in various engineering sectors, including aerospace, biomedical and industrial. The aim of this paper is to provide an overview of the recent advancements in digital hydraulic technology, focusing on the various applications and their benefits. The paper begins by introducing the two different branches of this innovative technology. Subsequently, it presents an overview of digital hydraulic technology applications, highlighting their specific advantages, particularly in biomedical, industrial and aeronautical sectors, when compared to conventional hydraulic technology. Finally, the paper addresses the challenges and limitations associated with digital hydraulic technology and discusses potential areas for future research and development.

31 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
Paolo TamburranoPaolo Tamburrano
Paolo Tamburrano
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
Elia DistasoElia Distaso
Elia Distaso
Riccardo AmiranteRiccardo Amirante
Riccardo Amirante
This paper presents a feasibility study using a commercially available ring stack actuator to develop a four way-two position (4/2) high frequency switching digital hydraulic valve. The excellent characteristics of multilayer piezoelectric actuators, such as a simple design, reduced moving parts, high reliability, and fast response, make them ideal for constructing this type of digital hydraulic valve. High frequency switching digital hydraulic valves (HFSVs), indeed, must be able to switch from fully open to fully closed positions in less than 5 ms, while maintaining minimal pressure losses and delivering large flows. The proposed valve architecture is assessed using well-established equations implemented in a Simulink model, allowing the hydraulic, mechanical, and electrical parts of the valve to be accurately simulated. The paper first provides a detailed description of the numerical model. Next, the hysteresis model of the ring stack actuator is validated against the data provided by the manufacturers on their website. Finally, the numerical results obtained with both open-loop and closed-loop control systems are presented. The simulations show that at a switching frequency of 200 Hz with maximum amplitude and duty cycle of the input pulse digital signal, the valve exhibits high average flow rates (~60 L/min), low average power consumption (~1500 W), and maintains a pressure drop of only 15 bar. Moreover, the simulations reveal that the control system is very effective since the valve switching time is within 1 ms.

4 March 2025 in Energies
Verified
Journal Article
Open access
PDF file
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
Vincenzo Di DomenicoVincenzo Di Domenico
Vincenzo Di Domenico
Paolo TamburranoPaolo Tamburrano
Paolo Tamburrano
Elia DistasoElia Distaso
Elia Distaso
Riccardo AmiranteRiccardo Amirante
Riccardo Amirante
Aviation is one of the most important industries in the current global scenario, but it has a significant impact on climate change due to the large quantities of carbon dioxide emitted daily from the use of fossil kerosene-based fuels (jet fuels). Although technological advancements in aircraft design have enhanced efficiency and reduced emissions over the years, the rapid growth of the aviation industry presents challenges in meeting the environmental targets outlined in the “Flightpath 2050” report. This highlights the urgent need for effective decarbonisation strategies. Hydrogen propulsion, via fuel cells or combustion, offers a promising solution, with the combustion route currently being more practical for a wider range of aircraft due to the limited power density of fuel cells. In this context, this paper designs and models a nitrogen–hydrogen heat exchanger architecture for use in an innovative hydrogen-propelled aircraft fuel system, where the layout was recently proposed by the same authors to advance sustainable aviation. This system stores hydrogen in liquid form and injects it into the combustion chamber as a gas, making the cryogenic heat exchanger essential for its operation. In particular, the heat exchanger enables the vaporisation and superheating of liquid hydrogen by recovering heat from turbine exhaust gases and utilising nitrogen as a carrier fluid. A pipe-in-pipe design is employed for this purpose, which, to the authors’ knowledge, is not yet available on the market. Specifically, the paper first introduces the proposed heat exchanger architecture, then evaluates its feasibility with a detailed thermodynamic model, and finally presents the calculation results. By addressing challenges in hydrogen storage and usage, this work contributes to advancing sustainable aviation technologies and reducing the environmental footprint of air travel.

1 December 2025 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
Francesco SciattiFrancesco Sciatti
Francesco Sciatti
VDVincenzo Di Domenico
Vincenzo Di Domenico
PTPaolo Tamburrano
Paolo Tamburrano
ECEmilio Caprioli
Emilio Caprioli
EDElia Distaso
Elia Distaso
RARiccardo Amirante
Riccardo Amirante
Hydrogen propulsion is a promising solution for reducing flight emissions in aviation industry, offering a cleaner alternative to conventional kerosene-fuelled aircrafts. While hydrogen combustion is more practical in the short term due to the current limitations of fuel cell power density, it introduces challenges in fuel system design. In previous work, an innovative hydrogen-powered aircraft fuel system was proposed and modelled within the Matlab/Simulink environment using the Simscape libraries. The proposed architecture features slightly pressurized liquid hydrogen (LH 2 ) storage tanks, an electrically driven two-stage centrifugal pump for LH2 pressurization, and a heat exchanger that recovers energy from exhaust gases to vaporise LH2 into gaseous hydrogen (GH 2 ) and superheat it to the optimal temperature for combustion. At the core of the metering process, a novel valve precisely adjusts the GH 2 flow to the combustion chamber based on pilot demands. Building on this prior research, the current study focuses on enhancing the numerical modelling of the fuel system, with particular emphasis on the control system and the metering valve. Specifically, the latter, designed as a convergent nozzle capable of reaching sonic conditions at the throat section, is now modelled with improved accuracy using well-established gas dynamics equations implemented in Simscape Language. The resulting valve custom block, integrated into the overall fuel system model, provides a more accurate representation of the valve’s dynamic behaviour and enables a precise evaluation of the complete fuel system performance under closed-loop conditions.