Cr adsorption on wood-based powdered activated carbon (WPAC) was characterized by scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The highest Cr(VI) adsorption (40.04%) was obtained under acidic conditions (pH 3), whereas Cr removal at pH 10 was only 0.34%. The mechanism of Cr(VI) removal from aqueous solutions by WPAC was based on the reduction of Cr(VI) to Cr(III) with the concomitant oxidation of C-H and C-OH to C-OH and C=O, respectively, on the surface of WPAC, followed by Cr(III) adsorption. Raman spectroscopy revealed a change in the WPAC structure in terms of the D/G band intensity ratio after Cr(VI) adsorption. SEM-EDS analysis showed that the oxygen/carbon ratio on the WPAC surface increased from 9.85% to 17.74%. This result was confirmed by XPS measurements, which showed that 78.8% of Cr adsorbed on the WPAC surface was in the trivalent state. The amount of oxygen-containing functional groups on the surface increased due to the oxidation of graphitic carbons to C-OH and C=O groups.
Two-dimensional MXene-based materials are potential of presenting unique catalytic performances of electrocatalytic reactions. The surface functionalization of MXene-based catalysts is attractive for developing efficient electrocatalysts toward nitrogen reduction reaction. Herein, we reported a Ti3C2Tx MXene with a medium density of surface functionalized fluorine terminal groups, as an excellent N2 reduction reaction electrocatalyst with enhanced adsorption and activation of N2. The Ti3C2Tx MXene catalyst showed a production rate of ammonia as 2.81 × 10–5 μmol·s−1·cm−2, corresponding to a partial current density of 18.3 μA·cm−2 and a Faradic efficiency of 7.4% at − 0.7 V versus reversible hydrogen electrode in aqueous solutions at ambient conditions, substantially exceeding similar Ti3C2Tx MXene catalysts but with higher or lower densities of surface fluorine terminal groups. Our work suggests the capability of developing surface functionalization toolkit for enhancing electrochemical catalytic activities of two-dimensional MXene-based materials.
Facing greenhouse effects and the rapid exhaustion of fossil fuel, CO2 electrochemical reduction presents a promising method of environmental protection and energy transformation. Low onset potential, large current density, high faradaic efficiency (FE), and long-time stability are required for industrial production, due to economic costs and energy consumption. This minireview showcases the recent progress in catalyst design and engineering technology in CO2 reduction reaction (CO2RR) on copper based-catalysts. We focus on strategies optimizing the performance of copper-based catalysts, such as single-atom catalysts, doping, surface modification, crystal facet engineering, etc., and reactor design including gas diffusion layer, membrane electrode assembly, etc., in enhancing target electroreduction products including methane, methanol, ethylene, and C2+ oxygenates. The determination of the correlation and the developed technology might be helpful for future applications in the industry.