Facing greenhouse effects and the rapid exhaustion of fossil fuel, CO2 electrochemical reduction presents a promising method of environmental protection and energy transformation. Low onset potential, large current density, high faradaic efficiency (FE), and long-time stability are required for industrial production, due to economic costs and energy consumption. This minireview showcases the recent progress in catalyst design and engineering technology in CO2 reduction reaction (CO2RR) on copper based-catalysts. We focus on strategies optimizing the performance of copper-based catalysts, such as single-atom catalysts, doping, surface modification, crystal facet engineering, etc., and reactor design including gas diffusion layer, membrane electrode assembly, etc., in enhancing target electroreduction products including methane, methanol, ethylene, and C2+ oxygenates. The determination of the correlation and the developed technology might be helpful for future applications in the industry.
Flow cells featuring a gas diffusion electrode (GDE) have emerged as an attractive platform for electrochemical CO2 reduction, offering high current densities (~300 mA·cm−2) and low energy consumption. However, the formation of salt precipitates, particularly carbonate and bicarbonate, poses a significant deficiency by reducing the cell’s operational longevity. In this study, we present a novel approach to mitigate salt precipitates in real-time through acid–base interaction. Recovery efficiency and partial current density of the cell were used to evaluate the capability of removing salt precipitates and the maintenance of CO2 reduction reactions (CO2RRs). It was suggested that the direct treatment of intermittent acid rinse recovers the performance of CO2RRs to a large extent (>97%), and the modification of the proton exchange resin reduces the reduction rate of partial current densities to 1/15 than that of the unmodified. This improvement enhances the cell’s catalytic performance, enabling the stability test for catalysts within the GDE-based flow cell.