Yannick BALCAEN

Dr. Yannick BALCAEN

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
MMMorgane Mokhtari
Morgane Mokhtari
PPPierrick Pommier
Pierrick Pommier
YBYannick BALCAEN
Yannick BALCAEN
JOEL ALEXISJOEL ALEXIS
JOEL ALEXIS
Among all the additive manufacturing techniques, Laser Powder Bed Fusion (LBPF), also called Selective Laser Melting (SLM), is the most common technique due to its high capability of building complex parts with generally improved mechanical properties. One of the main drawbacks of this technique is the sample size limitation, which depends on elaborating chamber dimensions. In this study, we investigate the viability of obtaining large parts with the laser welding of additive manufactured plates. A comparison of the microstructure and the tensile mechanical properties of SLM-welded plates and cold-rolled welded plates was performed. This paper shows the possibility of obtaining defect-free parts. Even if welding has a low impact on the microstructure of the SLM samples, fractures are located on the fusion zone, and a decrease in ductility of around 30% compared to the base metal is observed.

1 August 2020 in Materialia
Verified
Journal Article
Closed access
MCMarine Chambard
Marine Chambard
DRDjamel Remache
Djamel Remache
YBYannick BALCAEN
Yannick BALCAEN
ODOlivier Dalverny
Olivier Dalverny
JOEL ALEXISJOEL ALEXIS
JOEL ALEXIS
GBGhislaine Bertrand
Ghislaine Bertrand

24 May 2022 in Coatings
Verified
Journal Article
Open access
PDF file
APAmbra Paterlini
Ambra Paterlini
JOEL ALEXISJOEL ALEXIS
JOEL ALEXIS
YBYannick BALCAEN
Yannick BALCAEN
GBGhislaine Bertrand
Ghislaine Bertrand
Ceramic coatings have a long history in the orthopaedic field, with plasma sprayed coatings of hydroxyapatite as leading standard in the manufacturing process; however, these coatings can contain secondary phases resulting from the decomposition of hydroxyapatite at high temperatures, which limit the lifetime of implants and their osseointegration. This work aims to produce coatings that can maximize bone osseointegration of metallic implants. In order to preserve the raw characteristics of hydroxyapatite powders that are thermally unstable, coatings were deposited by cold spray onto Ti6Al4V alloy substrates. In contrast with other thermal spray technologies, this process presents the advantage of spraying particles through a supersonic gas jet at a low temperature. On top of hydroxyapatite, carbonated nanocrystalline apatite was synthesized and sprayed. This biomimetic apatite is similar to bone minerals due to the presence of carbonates and its poor crystallinity. FTIR and XRD analyses proved that the biomimetic characteristics and the non-stoichiometric of the apatite were preserved in the cold spray coatings. The cold spray process did not affect the chemistry of the raw material. The adhesion of the coatings as well as their thicknesses were evaluated, showing values comparable to conventional process. Cold spraying appears as a promising method to preserve the characteristics of calcium phosphate ceramics and to produce coatings that offer potentially improved osseointegration.

29 September 2023 in Metals
Verified
Journal Article
Open access
PDF file
JRJordan RIGAUD
Jordan RIGAUD
YBYannick BALCAEN
Yannick BALCAEN
MMMorgane Mokhtari
Morgane Mokhtari
JRJordan RIGAUD
Jordan RIGAUD
ODOlivier Dalverny
Olivier Dalverny
JOEL ALEXISJOEL ALEXIS
JOEL ALEXIS
Laser powder bed fusion (L-PBF) is a novel process representing a possible solution for producing resistant parts using NiCrBSi hard-facing nickel alloys with complex geometry. Process parameters for more common alloys are explored with a standard Renishaw AM400 device (Renishaw, Wotton-under-Edge, UK) and an SLM Solution 250 device (SLM Solutions Group AG, Lübeck, Germany) modified with a baseplate preheated at high temperatures (300 °C and 500 °C). Laser remelting is also investigated in hopes of further improving material health. The origin of the main defects is studied. A lack of fusion is likely to be generated by spatters ejected from the melting pool while cracks are induced by the alloy’s lack of toughness. Using image analyses, those defects are quantified and correlated with processing parameters. Lack of fusion and total crack length decrease with an increase in baseplate’s preheating temperature. However, crack width increases with preheating temperature. Therefore, via a careful optimization of process parameters, samples with a surface density of 99% and narrow cracks are obtained.

9 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
RGRobin Guillon
Robin Guillon
CSCédric Stéphan
Cédric Stéphan
YBYannick BALCAEN
Yannick BALCAEN
CJClaudie Josse
Claudie Josse
BFBenoit Fori
Benoit Fori
JOEL ALEXISJOEL ALEXIS
JOEL ALEXIS
Hard chromium coatings have demonstrated their performance for several decades, particularly for their wear and corrosion resistance properties. However, the traditional process using chromium trioxide (CrO3) is very toxic and is intended to disappear in the European Union by 2024, thanks to the REACH regulation. This study aimed to determine the residual stress of amorphous chromium deposits elaborated from baths containing trivalent chromium ions. However, the amorphous structure of these deposits does not allow the determination of residual stresses by conventional means. In this study, we propose adapting a recent method called “FIB-DIC”, which is not limited by the material’s crystalline structure compared to the classical X-ray diffraction (XRD) analysis. The method is based on the measurement of relaxation-induced displacement fields following the ablation of material on a very local scale. The results obtained by the classical (XRD) and the FIB-DIC method on crystallized heat-treated Cr(III) deposits are 296 ± 45 and 377 ± 275 MPa. Then, the FIB-DIC technique allowed us to evaluate a residual stress level of 479 ± 359 MPa for amorphous trivalent chromium coating, which has never been performed before.

13 November 2024 in Applied Mechanics
Verified
Journal Article
Open access
PDF file
OPOlivier Pantalé
Olivier Pantalé
YMYannis Muller
Yannis Muller
YBYannick BALCAEN
Yannick BALCAEN
Gleeble thermomechanical simulators are widely utilized tools for the investigation of high-temperature deformation behavior in materials. However, temperature gradients that develop within the specimen during Gleeble compression tests have the potential to result in non-uniform deformation, which may subsequently impact the accuracy of the measured mechanical properties. This study presents an experimental and numerical investigation of the temperature fields in 2017-T4 aluminum alloy specimens prior to Gleeble compression tests at temperatures ranging from 300 °C to 500 °C utilizing uniform temperature distribution (ISO-T) tungsten carbide anvils. The use of multiple thermocouples, welded to both the specimen and anvils, offers valuable insights into the temperature gradients and their evolutions. A coupled thermal–electrical finite-element model was developed in Abaqus for the purpose of simulating the resistive heating process. A user amplitude subroutine (UAMP) is implemented to regulate the heating based on a proportional–integral–derivative (PID) algorithm that modulates the current density to follow the specified temperature profile. The numerical results demonstrate that the temperature gradients within the specimen at the end of the heating process, reaching a temperature of 400 °C, are minimal, with values below 1.9 °C. This is in accordance with the experimental observations. The addition of graphite foils between the specimen and anvils has been shown to effectively reduce the gradients. The use of the measured anvil temperature as a boundary condition, rather than a constant value of 20 °C, has been demonstrated to improve the agreement between the simulated and experimental cooling curves. The modeling approach provides a framework for quantifying temperature gradients in Gleeble compression specimens and for assessing their impact on the measured constitutive response of materials at elevated temperatures.