Hard chromium coatings have demonstrated their performance for several decades, particularly for their wear and corrosion resistance properties. However, the traditional process using chromium trioxide (CrO3) is very toxic and is intended to disappear in the European Union by 2024, thanks to the REACH regulation. This study aimed to determine the residual stress of amorphous chromium deposits elaborated from baths containing trivalent chromium ions. However, the amorphous structure of these deposits does not allow the determination of residual stresses by conventional means. In this study, we propose adapting a recent method called “FIB-DIC”, which is not limited by the material’s crystalline structure compared to the classical X-ray diffraction (XRD) analysis. The method is based on the measurement of relaxation-induced displacement fields following the ablation of material on a very local scale. The results obtained by the classical (XRD) and the FIB-DIC method on crystallized heat-treated Cr(III) deposits are 296 ± 45 and 377 ± 275 MPa. Then, the FIB-DIC technique allowed us to evaluate a residual stress level of 479 ± 359 MPa for amorphous trivalent chromium coating, which has never been performed before.
The main constituent of the planetary lithosphere is the dominant silicate mineral, olivine α-(Mg,Fe)2SiO4, which, along with associated minerals and the olivine-hosted inclusions, records the physical–chemical conditions during the crystal growth and transport to the planetary surface. However, there is a lack of physical–chemical information regarding the kinetic factors that regulate crystal growth during melt–rock, fluid–rock, and magma–rock interactions. Here, we conducted an experimental reaction between hydrated peridotite rock and basaltic melt and coupled this with a structural and elemental analysis of the quenched products by high-resolution transmission electron microscopy. The quenched products revealed crystallographically oriented oxide nanocrystals of ilmenite (Fe,Mg)(Ti,Si)O3 that grew over the newly formed olivine in the boundary layer melt of the reaction zone. We established that the growth mechanism is epitaxial and is common to both experimental and natural systems. The kinetic model developed for shallow (>1 GPa) conditions should be revised. The resulting kinetic model has a wide range of geological implications—from disequilibrium mineral growth and olivine-hosted inclusion production to mantle metasomatism—and helps to clarify how geological reactions proceed at depth.