Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.

Croton lechleri, commonly known as Dragon’s blood, is a tree cultivated in the northwest Amazon rainforest of Ecuador and Peru. This tree produces a deep red latex which is composed of different natural products such as phenolic compounds, alkaloids, and others. The chemical structures of these natural products found in C. lechleri latex are promising corrosion inhibitors of admiralty brass (AB), due to the number of heteroatoms and π structures. In this work, three different extracts of C. lechleri latex were obtained, characterized phytochemically, and employed as novel green corrosion inhibitors of AB. The corrosion inhibition efficiency (IE%) was determined in an aqueous 0.5 M HCl solution by potentiodynamic polarization (Tafel plots) and electrochemical impedance spectroscopy, measuring current density and charge transfer resistance, respectively. In addition, surface characterization of AB was performed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy techniques. Chloroform alkaloid-rich extracts resulted in IE% of 57% at 50 ppm, attributed to the formation of a layer of organic compounds on the AB surface that hindered the dezincification process. The formulation of corrosion inhibitors from C. lechleri latex allows for the valorization of non-edible natural sources and the diversification of the offer of green corrosion inhibitors for the chemical treatment of heat exchangers.

Chitosan biopolymer membranes reinforced with channel-selective ZIF-8 nanofillers were developed and thoroughly characterized as separators for bioelectrochemical systems. This study explores the synergistic effect of incorporating ZIF-8 into a chitosan matrix to enhance membrane performance. Key properties including water retention, chemical and thermal stability, surface resistance, antifouling capacity, and ionic conductivity were evaluated and benchmarked against commercial Nafion-117 and nanofiltration (NF) membranes. The ZIF-8/chitosan composite membranes (ZIF-8/CS) demonstrated excellent water retention and structural stability under harsh conditions, along with significantly reduced surface resistance and effective rejection of organic contaminants and salts (NaCl, Na₂SO₄). Notably, the composite ZIF-8/CS membranes achieved an ionic conductivity of 0.099 S/cm, approaching the value of Nafion-117 (0.13 S/cm) and substantially surpassing that of the NF membrane (0.013 S/cm). These results indicate that ZIF-8-reinforced chitosan membranes present a promising, sustainable, and cost-effective alternative to traditional separators in bioelectrochemical applications.

Chitosan biopolymer membranes reinforced with channel-selective ZIF-8 nanofillers were developed and characterized for use as separators in bioelectrochemical systems. The study focused on the application of biopolymer chitosan in combination with ZIF-8 as nano reinforcement agents to improve membrane performance. Key properties such as water retention, chemical and thermal stability, surface resistance, antifouling ability, and ionic conductivity of the mixed matrix membranes (Composite ZIF-8/chitosan) were evaluated and compared with commercial Nafion-117 and nanofiltration (NF) membranes. The composite ZIF-8/chitosan membranes exhibited excellent water retention and structural stability under harsh conditions, while reducing surface resistance and effectively rejecting organic contaminants and salts (NaCl, Na₂SO₄). Impressively, the ionic conductivity reached 0.105 S/cm, which is similar to that of Nafion-117. These results suggest that biopolymer chitosan reinforced with ZIF-8 nanofillers offers a sustainable and cost-effective alternative for use as separators in bioelectrochemical systems applications.