The electrification of passenger cars is one of the most effective approaches to reduce noxious emissions in urban areas and, if the electricity is produced using renewable sources, to mitigate the global warming. This profound change of paradigm in the transport sector requires the use of Li-ion battery packages as energy storage systems to substitute conventional fossil fuels. An automotive battery package is a complex system that has to respect several constraints: high energy and power densities, long calendar and cycle lives, electrical and thermal safety, crash-worthiness, and recyclability. To comply with all these requirements, battery systems integrate a battery management system (BMS) connected to an complex network of electric and thermal sensors. On the other hand, since Li-ion cells can suffer from degradation phenomena with consequent generation of gaseous emissions or determine dimensional changes of the cell packaging, chemical and mechanical sensors should be integrated in modern automotive battery packages to guarantee the safe operation of the system. Mechanical and chemical sensors for automotive batteries require further developments to reach the requested robustness and reliability; in this review, an overview of the current state of art on such sensors will be proposed.
The widespread use of electric vehicles is nowadays limited by the “range anxiety” of the customers. The drivers’ main concerns are related to the kilometric range of the vehicle and to the charging time. An optimized fast-charge profile can help to decrease the charging time, without degrading the cell performance and reducing the cycle life. One of the main reasons for battery capacity fade is linked to the Lithium plating phenomenon. This work investigates two methodologies, i.e., three-electrode cell measurement and internal resistance evolution during charging, for detecting the Lithium plating conditions. From this preliminary analysis, it was possible to develop new Multi-Stage Constant-Current profiles, designed to improve the performance in terms of charging time and cells capacity retention with respect to a reference profile. Four new profiles were tested and compared to a reference. The results coming from the new profiles demonstrate a simultaneous improvement in terms of charging time and cycling life, showing the reliability of the implemented methodology in preventing Lithium plating.
Since lithium-ion batteries seem to be the most eligible technology to store energy for e-mobility applications, it is fundamental to focus attention on kilometric ranges and charging times. The optimization of the charging step can provide the appropriate tradeoff between time saving and preserving cell performance over the life cycle. The implementation of new multistage constant current profiles and related performances after 1000 cycles are presented and compared with respect to a reference profile. A physicochemical (SEM, XRD, particle size analysis, etc.) and electrochemical (incremental capacity analysis, internal resistance measurements) characterization of the aged cells is shown and their possible implementation on board is discussed.
Lithium-ion batteries (LIBs) are fundamental for the energetic transition necessary to contrast climate change. The characteristics of cathode active materials (CAMs) strongly influence the cell performance, so improved CAMs need to be developed. Currently, Li(Ni0.8Mn0.1Co0.1)O2 (NMC811) is state-of-the-art among the cathodic active materials. The aim of this work is the optimization of the procedure to produce NMC811: two different syntheses were investigated, the co-precipitation and the self-combustion methods. For a better understanding of the synthesis conditions, three different types of atmospheres were tested during the calcination phase: air (partially oxidizing), oxygen (totally oxidizing), and nitrogen (non-oxidizing). The synthesized oxides were characterized by X-ray Powder Diffraction (XRPD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Inductively Coupled Plasma (ICP), and Particle Size Distribution (PSD). The most promising materials were tested in a half-cell set up to verify the electrochemical performances. The procedure followed during this study is depicted in the graphical The oxidizing atmospheric conditions turned out to be the most appropriate to produce NMC811 with good electrochemical properties.
Mathematical modelling and software simulation nowadays are very effective tools for both understanding and predicting corrosion processes and the protection of metallic components. COMSOL Multiphysics 5.6 software provides validated mathematical models that can be used, for a given geometry, as a tool to predict and prevent corrosion of components. The corrosion of zinc-coated steel sheets has been studied in this work by comparing results of the simulations with laboratory tests carried out in a salt spray. Results of both the mathematical modelling and empirical tests give the possibility to estimate the stability of the protective zinc layer over time. The examination of the discrepancies between two analytical methods for the investigation of corrosion phenomena leads to possible modifications in the model in order to reach as much as possible coherence with experimental data. As a final result, a computational model of corrosion phenomena in an automotive component has been reached, allowing in the future to partially substitute laboratory tests, usually being highly time consuming and expensive.
The shift towards E-mobility transportation represents an important step to guarantee an ecological and energetic transition. To have a good market penetration of electric vehicles, however, we must consider the needs of consumers, who demand short charging times and a long battery life. The study and design of DCFC (direct current fast charging) profiles is fundamental to achieve this goal. In a previous work, new DCFC profiles based on Multi Stage Constant Current (MSCC) charge step were proposed. The new profiles have been designed with the aim of providing a fast charge that avoids the conditions in which the cell incurs in lithium plating. In this work the results of two characterization techniques are presented: Electrochemical Impedance and Raman Spectroscopies. The first confirms the advantage of using the customized profiles, without dismantling the cell, while the second confirms the absence of Li plating on the anode surface, after the teardown.