Since lithium-ion batteries seem to be the most eligible technology to store energy for e-mobility applications, it is fundamental to focus attention on kilometric ranges and charging times. The optimization of the charging step can provide the appropriate tradeoff between time saving and preserving cell performance over the life cycle. The implementation of new multistage constant current profiles and related performances after 1000 cycles are presented and compared with respect to a reference profile. A physicochemical (SEM, XRD, particle size analysis, etc.) and electrochemical (incremental capacity analysis, internal resistance measurements) characterization of the aged cells is shown and their possible implementation on board is discussed.
Lithium-ion batteries (LIBs) are fundamental for the energetic transition necessary to contrast climate change. The characteristics of cathode active materials (CAMs) strongly influence the cell performance, so improved CAMs need to be developed. Currently, Li(Ni0.8Mn0.1Co0.1)O2 (NMC811) is state-of-the-art among the cathodic active materials. The aim of this work is the optimization of the procedure to produce NMC811: two different syntheses were investigated, the co-precipitation and the self-combustion methods. For a better understanding of the synthesis conditions, three different types of atmospheres were tested during the calcination phase: air (partially oxidizing), oxygen (totally oxidizing), and nitrogen (non-oxidizing). The synthesized oxides were characterized by X-ray Powder Diffraction (XRPD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Inductively Coupled Plasma (ICP), and Particle Size Distribution (PSD). The most promising materials were tested in a half-cell set up to verify the electrochemical performances. The procedure followed during this study is depicted in the graphical The oxidizing atmospheric conditions turned out to be the most appropriate to produce NMC811 with good electrochemical properties.
Thermo-electrochemical cells (or thermocells) represent a promising technology to convert waste heat energy into electrical energy, generating power with minimal material consumption and a limited carbon footprint. Recently, the adoption of ionic liquids has pushed both the operational temperature range and the power output of thermocells. This research discusses the design challenges and the key performance limitations that need to be addressed to deploy the thermocells in real-world applications. For this purpose, a unique up-scaled design of a thermocell is proposed, in which the materials are selected according to the techno-economic standpoint. Specifically, the electrolyte is composed of EMI-TFSI ionic liquid supplemented by [Co(ppy)]3+/2+ redox couples characterized by a positive Seebeck coefficient (1.5 mV/K), while the electrodes consist of carbon-based materials characterized by a high surface area. Such electrodes, adopted to increase the rate of the electrode reactions, lead to a thermoelectric performance one order of magnitude greater than the Pt electrode-based counterpart. However, the practical applications of thermocells are still limited by the low power density and low voltage that can be generated.
The shift towards E-mobility transportation represents an important step to guarantee an ecological and energetic transition. To have a good market penetration of electric vehicles, however, we must consider the needs of consumers, who demand short charging times and a long battery life. The study and design of DCFC (direct current fast charging) profiles is fundamental to achieve this goal. In a previous work, new DCFC profiles based on Multi Stage Constant Current (MSCC) charge step were proposed. The new profiles have been designed with the aim of providing a fast charge that avoids the conditions in which the cell incurs in lithium plating. In this work the results of two characterization techniques are presented: Electrochemical Impedance and Raman Spectroscopies. The first confirms the advantage of using the customized profiles, without dismantling the cell, while the second confirms the absence of Li plating on the anode surface, after the teardown.
Solid-state batteries are expected to represent the next major advancement in battery technology for Electric vehicles; however, further research and development are still required. In this study, a novel polymer solid electrolyte based on a polymerized ionic liquid and an ionic liquid plasticizer was used paired with an NMC 622 cathode. The cells performances were investigated to assess their suitability for automotive applications through driving cycle simulating real-driving conditions and based on the Worldwide Harmonized Light Vehicles Test Procedure (WLTP). Specifically, the cells were evaluated under standard aging conditions at low C-rates (e.g. C/20), rate capability tests ranging from C/20 to C/3, and WLTP cycling protocols. On two cells WLTP cycles were repeated until 85% of state of health (SoH) was reached. As a result of the WLTP application, the cells reached driving ranges of 209 km and 244 km on a single charge. These findings are encouraging and suggest a promising outlook for further developments and optimizations in the field.