This paper investigates the biodegradation properties of cellulose fibers and PLA biopolymer. For that purpose, hemp, jute, and sisal fibers as lignocellulose fibers; viscose fibers (CV) as regenerated cellulose; and polylactide (PLA) as biopolymer were buried in farmland soil for periods of 2, 4, 7, 9 and 11 days under controlled conditions. The influence of their biodegradation on the fiber mechanical properties, bacteria and fungi population, as well as on the soil quality were investigated. After exposure to microorganisms, analyses of the fibers’ morphological (SEM), chemical (FTIR), and thermal (TGA) properties were conducted to achieve a comprehensive understanding of their biodegradability. The analysis concluded that lignin and pectin content have a greater impact on the biodegradation of hemp, jute, and sisal fibers than factors like crystallinity and degree of polymerization. The viscose fibers showed lower biodegradability despite their lower degree of polymerization, indicating a resistance to biodegradation due to the “skin” formed during the spinning process. PLA fibers experienced chemical hydrolysis and significant microbial attack, resulting in reduced tenacity. The acquired findings yield valuable insights into the biodegradability of the fibers, thereby facilitating the selection of appropriate fibers for the development of environmentally sustainable products. Notably, a literature review revealed a paucity of research on fiber biodegradability, underscoring the significance of the present study’s contributions.
The need for sustainable alternatives to conventional plastic mulches in agriculture has led to the development of various types of biodegradable mulches made from natural fibres and biopolymers to reduce environmental pollution and mitigate soil pollution caused by conventional plastic mulch usage. Degradation, impact on soil temperature and humidity, and weed suppression properties of needle-punched nonwoven mulches of different mass per unit area, made of jute, hemp, viscose, and PLA biopolymer, are investigated. Their biodegradation is determined by changes in the mulch properties (mass per unit area, thickness, air permeability, tensile properties, microscopic images, and FTIR analyses) during 300 days of exposure to the environmental conditions in the period from May 2022 to February 2023. The change in mass per unit area, thickness, air permeability, and tensile properties of nonwoven mulches did not show a tendency to degrade during exposure to environmental conditions. The microscopic and FTIR analysis showed the degradation of the fibres from the mulches during the exposure time to a certain extent. The environmental conditions influence the change in the dimensions of the mulches (shrinkage and expansion)—which impact periodically tested mass results per unit area—as well as their thickness and air permeability. The nonwoven mulches provide higher temperatures compared to bare soil, though not as high as those observed beneath traditional agricultural foil. When comparing the humidity in bare soil and soil covered by mulches during the plant growth period (June to October), it was found that soil humidity was higher beneath all mulches. The nonwoven mulches provide superior soil moisture retention compared to conventionally used agrofoil. Almost all nonwoven mulches effectively suppressed weed growth, except hemp mulches. The newly produced mulches have the potential to replace traditional agrofoil, offering improved conditions for plant growth, effective weed control, and faster degradation without causing harm to the environment.
This paper presents a three-year study of the influence of different amounts of nitrogen on the properties of flax plants and fibres. At the same time, the acclimatization ability of five different cultivars of fibre flax was estimated through the valorisation of their morphological (technical stem length, stem thickness) and physical-mechanical properties of the fibres (length, fineness, tenacity). Cultivar trials with fibre flax were set up across three years (2008–2010) at the following locations: the experimental fields of the Faculty of Agriculture in Zagreb on anthropogenized Eutric Cambisol and the College of Agriculture at Križevci on pseudogley on level terrain. The selected cultivars were fertilized without and with different nitrogen rates (0, 30, 60 and 90 kg/ha) in different time. The trials were carried out according to the RCBD in four replications. According to the results of the three-year study of flax and fibres, significant differences were established among the cultivars and among the added nitrogen rates under study. Based on the results of the morphological and textile-technological properties of flax, the cultivars Viola and Agatha achieved higher values at the location of Križevci, where it was not necessary to add more than 30 kg N/ha.
1 January 2023 in IOP Conference Series: Materials Science and Engineering
The aim of this paper is to investigate biodegradation properties of PLA (as a bio-based polymer), Hemp, Jute (as natural bast fibers) and Viscose (as a cellulose regenerates) for agrotextile nonwovens production. For the purpose of those investigations, an analysis of the biodegradation time of samples were performed by soil burial test (ISO 11721 – Textiles – Determination of resistance of cellulose-containing textiles to microorganisms – Soil burial test) conducted under controlled conditions in laboratory and under real weather conditions. The samples were exposed in the soil for 4, 7, 9 and 11 days. An analysis of mass loss and changes in their mechanical properties, compared to unexposed samples, were determined.
The development and application of new types of fibres and their wider application influence the continuous invention of a more economical starching process, as one of the most expensive stages in the technological process of woven fabric production. For example, aramid fibres are increasingly used in clothing with effective protection from mechanical, thermal and abrasion exposure. Simultaneously, comfort and regulation of metabolic heat are extremely important, and this is achieved by using cotton woven fabrics. For such a woven fabrics to satisfy the protective properties and the possibility of all-day wear, fibre is needed, and thus a yarn, that will enable the efficient production of fine, light and comfortable protective woven fabrics. This paper investigates the influence of starching on the mechanical properties of aramid yarns and their comparison to cotton yarns of the same fineness. This will lead to knowledge about the efficiency and necessity of aramid yarn starching. The tests were carried out on an industrial and laboratory starching machine. According to the obtained results, the necessity and the improvement of the physical-mechanical properties of cotton and aramid yarns can be determined, both by industrial and laboratory starching. Finer yarn starched by the laboratory starching process achieves greater efficiency in the yarn’s strength and resistance to wear, which indicates the need for starching aramid yarns, especially fineness 16.6 × 2 tex, but also finer ones.