Graphene material has a variety of excellent properties and applications in energy storage, biomaterials, photoelectric devices, and other fields. With the progress of nanotechnology, graphene nanomaterials have shown their advantages in the field of new nano-corrosion coatings with their high barrier structure. In addition, polyurethane is also widely used in the field of anti-corrosion coatings due to its excellent chemical resistance, mechanical properties, and weathering resistance. The preparation of composite coatings by combining graphene nanomaterials with traditional polyurethane (PU) coatings has opened up a new way for the research and development of new anticorrotic coatings. In this paper, graphene polyurethane composite coating was first used as the research object, and the mechanism of graphene material in the new composite coating was analyzed. Then, graphene oxide (GO), a commonly used precursor material, was used as an entry point for a detailed study of the properties of GO materials and the advantages and disadvantages of its application in composites, and two types of modifications, covalent and non-covalent, were analyzed. In addition, the preparation methods and processes of graphene polyurethane composite coatings were summarized. Finally, the future research directions and research focus of GO were prospected.

A new type of high elastic polyurea protective coating reinforced by nano silica is prepared by filler composite in order to avoid both the leakage of fluorine chemical pipelines containing highly toxic and dangerous media as well as the damage to fluorine chemical pipelines under impact loads. The aim is to improve the intrinsic safety of fluorine chemical pipelines and ensure the safety of the ecological environment, life and property. The effects of different processes and process parameters on the properties of polyurea coating were studied. The polyurea coating was blended and strengthened with nano silica modified by silane coupling agent KH-550. The suitable stirring speed, material addition sequence and nano silica concentration of the new polyurea material were put forward to prepare a new polyurea coating with excellent properties. The properties of the polyurea coating were characterized, including curing time, tensile strength, elongation at break and impact resistance. Then, by using the numerical simulation method, the protection law of polyurea coating on fluorochemical pipelines with or without polyurea coating under the impact of small balls with different speeds was studied, and the equivalent stress mitigation and energy absorption mechanism of polyurea coating were analyzed from the perspective of macro and micro mechanisms. The results show that silane coupling agent KH-550 has successfully modified nano silica, and the optimal filling concentration of modified nano silica is 4 wt%. At this time, the tensile strength of filled reinforced polyurea coating is increased to 15.7 MPa, the elongation at break is 472%, the hardness is 61 HA, and the impact resistance of the matrix material is increased by 9.7 kJ/m². This shows that the polyurea reinforced by nano silica has excellent mechanical properties and impact resistance. The simulation results show that the polyurea coating can slow down the impact caused by the equivalent stress of small balls at different speeds. When the ball speed is 5 m/s, the equivalent stress of polyurea coating slows down to 49.3%, and the percentage of reduction of the impact caused by the equivalent stress of the polyurea coating decreases gradually with the increase of ball impact speed.

With the rapid development of science and technology, the integration and complexity of aerospace vehicles, weaponry, and large-scale chemical equipment are becoming higher and higher. PHM plays an important role in realizing reductions in equipment loss due to failures in many fields. In order to systematically sort through the research history of PHM and deeply analyze the development status of AR and DT technologies in the field of PHM, to clarify the current technical challenges and future development directions and to provide valuable references and insights for researchers, engineers, and decision-makers in the related fields, this paper summarizes the development of PHM in the engineering field. This paper summarizes the development of PHM in the field of engineering, from the initial PHM used in aerospace to the current PHM systems supported by various advanced technologies; analyzes the advantages and shortcomings of the digital twin and augmented reality technologies used for PHM; and organizes and summarizes the future directions and future research focuses of PHM research based on the existing technologies (mainly digital twins and augmented reality). After systematic research and study, we found that the integration of augmented reality and digital twin technologies will provide superb simulation capabilities and immersive operation and bring new challenges and opportunities. Therefore, it is also imperative to address the challenges and limitations that hinder the seamless integration of the new technologies.

A prediction method applicable to erosion-prone areas of fluorine chemical pipelines is herein proposed. By summarizing the common working conditions in the fluorine chemical industry, a computational fluid dynamics (CFD) model for industrial pipelines is established, and three-dimensional numerical calculations of the flow field in the pipelines are carried out to analyze the characteristics of the hydrodynamic parameters and phase distribution in the flow field, as well as the erosion rate distribution in different areas of the pipelines. The areas in the pipeline that are susceptible to erosion are predicted based on the results. The method has universal applicability and has been applied in many large petrochemical companies. It achieves the function of predicting the areas of severe pipeline erosion in a scientifically sound manner. This paper also details the application of the method in a distillation oil and gas pipeline of a large oil and gas company in western China.

The Zn-5%Al-rare earth alloy coating has been used in High-Vanadium Full-Locked Cable (HVFLC) that is made in China. This application has shown excellent protective performance. However, during practical use, the coating may appear to be deteriorated in various degrees, which may further worsen the corrosion resistance and mechanical properties of the cable. This paper focuses on High-Vanadium Full-Locked Cable (HVFLC). Firstly, different types of prefabricated defect treatments have been applied into the wires of the cable, followed by corrosion paste accelerated corrosion test and mechanical tensile properties test. The aim of this act is to figure out the effects on the corrosion resistance and mechanical properties of the wire due to different types of defects in alloy plating. The results show that the corrosion resistance of the wires has been greatly affected because of the solder joint defects. Furthermore, the tensile strength of the wire indicates a drop of about 40%. This research makes up the gap in the related fields in China. In addition, basic data has been provided for the development of the HVFLC in China.

Carbon-based materials, characterized by their high specific surface area and exceptional chemical stability, have become integral to adsorption-based remediation methods. Carbon materials demonstrate exceptional efficiency, selectivity, and environmental compatibility in radionuclide adsorption. However, the practical application of conventional carbon materials is limited by their insufficient adsorption capacity and selectivity. Plasma modification has emerged as a highly effective strategy for enhancing the surface chemistry of carbon materials, thereby significantly improving their adsorption performance. This process increases the specific surface area of carbon materials and introduces a variety of functional groups, which in turn boost their capacity to adsorb radionuclides. This review systematically explores the progress made in modifying carbon-based adsorbents for the remediation of radioactive nuclides, with a particular emphasis on the mechanisms and effectiveness of plasma modification, covering studies on plasma-modified carbon materials for radionuclide adsorption published between 2009 and 2024. Furthermore, the review discusses the future prospects and practical applications of plasma-modified carbon materials in nuclear wastewater treatment, providing a scientific foundation for the development of efficient and sustainable remediation technologies.