A dielectric barrier discharge (DBD) in atmospheric pressure air was excited by a high-voltage pulse power supply. Capacitors with different capacitance were connected in the discharge circuit and their effects on discharge power calculation were evaluated. The average power deposited into the discharge were calculated by three different methods: 1) Lissajous figure; 2) product of voltage and current; and 3) watt-hour meter. Further studies showed that the capacitor with 10 nF was suitable for power calculation. At applied voltage of 9 kV, discharge power calculated by three methods were similar (around 25-27 W). However, with the increase of applied voltage, the discharge power obtained by product of voltage and current was far beyond the real value. Lissajous method has proven more appreciable for discharge power calculation in a pulsed plasma at high voltage. This study provides a practical guide for power calculation in a pulsed-driven DBD system.

Atmospheric pressure cold plasmas have great potential for surface functionalization, and the interaction between the plasmas and fibers is essential to understand the underlying physics. In this Letter, the penetration pattern and mechanism of an atmospheric pressure plasma jet (APPJ) interacting with different spacing fiber scaffolds were studied by both experiment and modeling. The intensified charge coupled device images showed that APPJ induced a radial surface streamer on the windward side of the scaffold and another axial forward streamer on the opposite side. Propagation distance of both the radial and axial streamers diminished as the spacing decreased. Similar trends were predicted by a 2D fluid model. The simulation results indicated that the high electrical field carried by the streamer head in APPJ was allowed to pass through the gap for large spacing scaffold, while it was blocked by high intensity charges at small spacing. Instead, one axial streamer was generated in the latter case. The physical insight on the penetration mechanism of plasma jet interacting with fiber array in this Letter may contribute to improve treatment uniformity of plasma technology.