Climatic chambers are highly important in research and industrial applications and are used to examine manufactured samples, specimens, or components in controlled environment conditions. Despite the growing industrial demand for climatic chambers, only a few published studies have specifically concentrated on performance analysis and functional improvements through numerical and experimental studies. In this study, a 3D computational fluid dynamics (CFD) model of a climatic chamber was developed using Ansys Fluent to simulate the fluid flow, heat, and mass transfer to obtain the velocity, temperature, and relative humidity fields in the interior box of a 1200 L climatic chamber. The results were then validated with experimental data from a prototype. Finally, the heat losses of the surrounding components of the chamber were calculated, and the relationship between the inside temperature and the overall thermal loss was modelled. This validated numerical model provides the possibility of optimising the performance of climate chambers by reducing the thermal loss from the walls and modifying the air flow pattern inside the chamber.
12 December 2007 in Molecular Crystals and Liquid Crystals
Liquid crystalline elastomers and polymers, which are able to undergo large, reversible deformations in response to an applied stimulus (including heat, pH, or electromagnetic radiation) could potentially be useful in a variety of microactuator devices. However, in order to compete with traditional silicon-based systems it is necessary to show that liquid crystalline polymers can be patterned with reduced dimensions without losing their functionality. In this article we investigate three different techniques which can be used to pattern liquid crystalline polymers on the micro- and nanoscale. These techniques are templating, photopatterning, and microtransfer printing. Advantages and disadvantages of each process are explored.
4 September 2019 in Journal of Thermal Science and Engineering Applications
Climatic chambers are of great importance in research and development to conduct tests of components in closed environmentally controlled conditions. The growing demand from the industry to fulfill stricter international standards creates the necessity to ensure that the thermofluidic behavior of climatic chambers guarantees high-quality consistency in their interior domain. At present, scientific research on climatic chambers available in the literature is scarce and is mostly based on lumped modeling, hence not addressing the heterogeneities that arise in the interior of the chamber. In this work, an in-depth 3D model of the velocity and temperature fields that develops in the interior of climatic chambers was developed in computer fluid dynamics (CFD) and validated with the experimental data from a new prototype. The key objective of this research was to establish a validated framework for model-based design optimization of climatic chambers. The proposed model showed good agreement with the experimental data with a difference of 0.6 m/s and 9.65 °C in the velocity and temperature fields, respectively, thus validating its applicability to perform model-based design optimization of climatic chambers.
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.
Climatic chamber testing conditions are becoming more demanding. A wide range of temperatures is used to check the quality of products and materials, since they are constantly being improved. However, there is no literature on how the components of the climatic chamber panels react under high temperatures. The present work therefore sets out to perform a thermal and mechanical characterisation of four core materials often used in sandwich panels: balsa wood, mineral wool, and polyethylene terephthalate and polyurethane rigid foams. The thermal characterisation focused on thermal conductivity and the specific heat was characterised using an indirect method developed previously by the authors to simulate a real application scenario where one surface of the sandwich panels was subjected to high temperature, while the opposite surface was kept at room temperature. Steady and unsteady conditions were analysed up to 200 °C. Balsa and mineral wool exhibited a nonlinear increase in thermal conductivity with temperature, and the polymeric foams showed linear behaviour. The specific heat results also increased with temperature, and the relation was nonlinear for all the tested materials except for polyethylene terephthalate, which showed linear behaviour. Higher temperatures had the least effect on the specific heat for balsa wood and mineral wool. The polyethylene terephthalate foams were the most affected by temperature. Temperature variation was tested using the impulse excitation technique. The polymeric foams and balsa wood were studied up to 100 °C and 160 °C, respectively. The elastic modulus decreased with temperature. After 24 h of cooling, the tests were repeated and the elastic modulus had regained or even increased its initial value, for all the materials.