The global interest in nearly zero-energy buildings (NZEBs) has led to their establishment as mandatory building objectives in Europe for all new constructions starting in 2021. The principles outlined in the Energy Performance of Building Directive (EPBD) emphasize the significance of reducing energy demand through various energy efficiency measures to achieve NZEB status. Among these measures, the utilization of high-performance glazing systems plays a crucial role in ensuring natural light, ventilation, favorable solar gain, aesthetics, and positive psychological effects in buildings, while maintaining high energy performance and thermal comfort without burdening the budget or harming the environment. The use of increasingly larger glazing areas makes this topic of great relevance. Nevertheless, numerous studies frequently overlook certain crucial aspects of glazing systems in their assessments. This review study aims to assess different glazing solutions based on four critical perspectives called “EThCE”: Energy performance, thermal comfort, cost-effectiveness, and environmental impact, considering their interrelationships. Furthermore, the importance of adopting a comprehensive approach for selecting the optimal glazing solution for NZEBs is discussed. Additionally, the relationship between glazing systems and climate change is taken into account. Ultimately, the authors propose a comprehensive approach, including all the influential factors, to assist designers and homeowners in making informed decisions regarding glazing system selection for new NZEBs or NZEB retrofits in different situations.
Low-emissivity (low-E) window films are designed to improve the thermal comfort and energy performance of buildings. These films can be applied to different glazing systems without having to change the whole window. This makes it possible to apply films to windows in old and historical buildings for which preservation regulations often require that windows should remain unchanged. This research aims to investigate the impacts of low-E window films on the energy performance and thermal comfort of a three-story historical stone building in the cold climate of Sweden using the simulation software “IDA ICE”. On-site measurements were taken to acquire thermal and optical properties of the windows. This research shows that the application of the low-emissivity window film on the outward-facing surface of the inner pane of the double-glazed windows helped to reduce heat loss through the windows in winter and unwanted heat gains in summer by almost 36% and 35%, respectively. This resulted in a 6% reduction in the building’s annual energy consumption for heating purposes and a reduction in the percentage of total occupant hours with thermal dissatisfaction from 14% (without the film) to 11% (with the film). However, the relatively high price of the films and low price of district heating results in a rather long payback period of around 30 years. Thus, the films seem scarcely attractive from a purely economic viewpoint, but may be warranted for energy/environmental and thermal comfort reasons.
One of the most important parameters that indicate the energy performance of a window system is the thermal transmittance (U-value). Many research studies that deal with numerical methods of determining a window’s U-value have been carried out. However, the possible assumptions and simplifications associated with numerical methods and simulation tools could increase the risk of under- or over-estimation of the U-value. For this reason, several experimental methods for investigating the U-value of windows have been developed to be used either alone or as a supplementary method for validation purposes. This review aims to analyze the main experimental methods for assessing the U-value of windows that have been published by national and international standards or as scientific papers. The analysis criteria include the type of the test in terms of boundary conditions (laboratory or in situ), the part of the window that was tested (only the center of glazing or the entire window), and the data analysis method (steady-state or dynamic). The experimental methods include the heat flow meter (HFM) method, guarded hot plate (GHP) method, hot box (HB) method, infrared thermography (IRT) method, and the so-called rapid U-value metering method. This review has been set out to give insights into the procedure, the necessary equipment units, the required length of time, the accuracy, the advantages and disadvantages, new possibilities, and the gaps associated with each method. In the end, it describes a set of challenges that are designed to provide more comprehensive, realistic, and reliable tests.
In the context of retrofitting existing buildings into nearly zero-energy buildings (NZEBs), in situ assessment methods have proven reliable for evaluating the performance of building components, including glazing systems. However, these methods are often time-consuming, intrusive to occupants, and disruptive to building operations. This study investigates the potential of a machine learning approach—multiple linear regression (MLR)—to predict the dynamic performance of an office building’s glazing system by analyzing surface temperature variations and their impact on nearby thermal comfort. The models were trained using in situ data collected over just two weeks—one in September and one in December—but were applied to predict the glazing performance on multiple other dates with diverse weather conditions. Results show that MLR predictions closely matched nighttime measurements, while some discrepancies occurred during the daytime. Nevertheless, the machine learning model achieved a daytime prediction accuracy of approximately 1.5 °C in terms of root mean square error (RMSE), which is lower than the values reported in previous studies. For thermal comfort evaluation, the MLR model identified the periods with thermal discomfort with an overall accuracy of approximately 92%. However, during periods when the difference between predicted and measured operative temperatures exceeded 1 °C, the thermal comfort predictions showed greater deviation from actual measurements. The study concludes by acknowledging its limitations and recommending a future approach that integrates machine learning with laboratory-based techniques (e.g., hot-box setups and solar simulators) and in situ measurements, together with a broader variety of glazing samples, to more effectively evaluate and enhance prediction accuracy, robustness, and generalizability.