Over time, inertial sensors have become an essential ally in the biomechanical field for current researchers. Their miniaturization coupled with their ever-improvement make them ideal for certain applications such as wireless monitoring or measurement of biomechanical variables. Therefore, in this article, a compendium of their use is presented to obtain biomechanical variables such as velocity, acceleration, and power, with a focus on combat sports such as included box, karate, and Taekwondo, among others. A thorough search has been made through a couple of databases, including MDPI, Elsevier, IEEE Publisher, and Taylor & Francis, to highlight some. Research data not older than 20 years have been collected, tabulated, and classified for interpretation. Finally, this work provides a broad view of the use of wearable devices and demonstrates the importance of using inertial sensors to obtain and complement biomechanical measurements on the upper extremities of the human body.
1 October 2024 in REVISTA DE CIENCIAS TECNOLÓGICAS
La complejidad en los movimientos de la actividad diaria que realizan las personas, origina que recurrentemente sufran de algún tipo de lesión en las extremidades (superiores/inferiores); siendo lo más común los daños en la articulación de la rodilla, afectando parcial o totalmente la movilidad. Estudios recientes indican que el empleo de dispositivos ortopédicos biomecánicos, como las órtesis, facilita la rehabilitación y acelera la recuperación de dichas lesiones. El principal objetivo del diseño de las órtesis para la rodilla es mejorar la movilidad, estabilidad y rigidez de la extremidad afectada. En este trabajo se presenta el proceso para la simulación de los movimientos de flexión y extensión de un prototipo virtual de una órtesis para rodilla, obteniendo como resultado la simulación y co-simulación entre MSC Adams® y Simulink-Matlab®. Para mostrar el proceso de simulación, se implementa un control tipo PID en el seguimiento de trayectorias del prototipo virtual de la órtesis de rodilla, utilizando un polinomio de Bézier. Los resultados muestran un buen desempeño en el seguimiento de trayectorias, obteniendo una trayectoria deseada de una flexión máxima de 2π/3 rad, con un error aproximado de 0.0124 radianes con respecto a la trayectoria deseada.
This paper presents the development of an electronic training system for the long muscles of the human upper limbs, designed to facilitate the adaptation and control of electronic prostheses based on the detection of muscle movements using electromyography. This system measures the biopotentials of the long muscles in the upper limbs, displaying this biopotential visually and audibly via LED indicators and providing auditory feedback. This feedback will be used to train and strengthen these muscles, which will later be used to control hand prostheses. The method used for measuring Electromyographic (EMG) biopotentials is based on the use of non-invasive dry silver electrodes. The EMG signal conditioning is performed with an analog card developed with operational amplifiers and previously published in 2023, called “Signal Conditioning for Long Myographic Surface Biopotentials with Dry Surface Electrodes”. The signal delivered by this signal conditioning card is captured by the 12-bit ADC converter of the STM32F103C8 microcontroller. Once the signal is digitized by an algorithm, the baseline voltage is sought to illuminate 12 LEDs that indicate the intensity of the muscle signal with a resolution of 50 or 25 mV. To achieve better results in muscle training, in addition to visually displaying the intensity of the muscle signal, a sound tone is generated with audible frequencies between 8 and 9 kHz, which depends on the intensity of the signal captured from the muscles. This provides auditory feedback to the user, improving the experience, the neural connection with the exercise, and the electronic muscle training system.