Claudia Cortes-Garcia

Dr. Claudia Cortes-Garcia

Tecnológico Nacional de México/CENIDET, Cuernavaca, Morelos, Mexico
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
Daniel Salazar-PérezDaniel Salazar-Pérez
Daniel Salazar-Pérez
Mario Ponce-SilvaMario Ponce-Silva
Mario Ponce-Silva
JAJose Marcos Alonso
Jose Marcos Alonso
JAJuan A. Aqui-Tapia
Juan A. Aqui-Tapia
Claudia Cortes-GarciaClaudia Cortes-Garcia
Claudia Cortes-Garcia
In this article, a novel high-power-factor electrolytic-capacitorless light-emitting diode (LED) driver based on the use of a ripple port is presented. The ripple port consists of adding an extra power processing circuit at the output of the converter that injects energy to compensate for the output current and voltage ripples. In this work, the main converter is built by using a flyback converter operating in the discontinuous conduction mode (DCM). The ripple port is implemented by adding an extra winding to the flyback coupled inductors, together with an extra switch, a capacitor, and an inductor. The additional switch is used to inject energy to the output in the time intervals, in which the flyback output current is low, thus reducing the output current ripple. The proposed converter is analyzed in detail, and a design methodology is proposed. A design example for a 27-V/1-A LED lamp is presented. Simulation and laboratory experiments have also been carried out. It is demonstrated that the proposed solution can achieve a reduction on the output current ripple of around 65% compared to the solution without ripple port for the same total capacitance and maintain a high power factor of 0.994.

29 June 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Andres Blanco OrtegaAndres Blanco Ortega
Andres Blanco Ortega
Jhonatan Isidro GodoyJhonatan Isidro Godoy
Jhonatan Isidro Godoy
DWDariusz Slawomir Szwedowicz Wasik
Dariusz Slawomir Szwedowicz Wasik
EREladio Martínez Rayón
Eladio Martínez Rayón
Claudia Cortes-GarciaClaudia Cortes-Garcia
Claudia Cortes-Garcia
FBFabio Abel Gómez Becerra
Fabio Abel Gómez Becerra
Over time, inertial sensors have become an essential ally in the biomechanical field for current researchers. Their miniaturization coupled with their ever-improvement make them ideal for certain applications such as wireless monitoring or measurement of biomechanical variables. Therefore, in this article, a compendium of their use is presented to obtain biomechanical variables such as velocity, acceleration, and power, with a focus on combat sports such as included box, karate, and Taekwondo, among others. A thorough search has been made through a couple of databases, including MDPI, Elsevier, IEEE Publisher, and Taylor & Francis, to highlight some. Research data not older than 20 years have been collected, tabulated, and classified for interpretation. Finally, this work provides a broad view of the use of wearable devices and demonstrates the importance of using inertial sensors to obtain and complement biomechanical measurements on the upper extremities of the human body.

31 December 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Mario Ponce-SilvaMario Ponce-Silva
Mario Ponce-Silva
Daniel Salazar-PérezDaniel Salazar-Pérez
Daniel Salazar-Pérez
Oscar Rodríguez BenítezOscar Rodríguez Benítez
Oscar Rodríguez Benítez
LVLuis Gerardo Vela-Valdés
Luis Gerardo Vela-Valdés
Abraham SanchezAbraham Sanchez
Abraham Sanchez
Juan AquiJuan Aqui
Juan Aqui
The main contribution of this paper is to show a new AC/DC converter based on the rearrangement of the flyback converter. The proposed circuit only manages part of the energy and the rest is delivered directly from the source to the load. Therefore, with the new topology, the efficiency is increased, and the stress of the components is reduced. The rearrangement consist of the secondary of the flyback is placed in parallel with the load, and this arrangement is connected in series with the primary side and the rectified voltage source. The re-arranged flyback is only a reductive topology and with no magnetic isolation. It was studied as a power supply for LEDs. A low frequency averaged analysis (LFAA) was used to determine the behavior of the proposed circuit and an equivalent circuit much easier to analyze was obtained. To validate the theoretical analysis, a design methodology was developed for the re-arranged flyback converter. The designed circuit was implemented in a 10 W prototype. Experimental results showed that the converter has a THDi = 21.7% and a PF = 0.9686.

1 January 2014 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
DSDariusz Szwedowicz
Dariusz Szwedowicz
QEQuirino Estrada
Quirino Estrada
Claudia Cortes-GarciaClaudia Cortes-Garcia
Claudia Cortes-Garcia
JBJorge Bedolla
Jorge Bedolla
GAGabriela Alvarez
Gabriela Alvarez
FCFernando Castro
Fernando Castro
This article details the experimental and numerical results on the energy absorption performance of square tubular profile with circular discontinuities drilled at lengthwise in the structure. A straight profile pattern was utilized to compare the absorption of energy between the ones with discontinuities under quasi-static loads. The collapse mode and energy absorption conditions were modified by circular holes. The holes were drilled symmetrically in two walls and located in three different positions along of profile length. The results showed a better performance on energy absorption for the circular discontinuities located in middle height. With respect to a profile without holes, a maximum increase of 7% in energy absorption capacity was obtained experimentally. Also, the numerical simulation confirmed that the implementation of circular discontinuities can reduce the peak load (Pmax) by 10%. A present analysis has been conducted to compare numerical results obtained by means of the finite element method with the experimental data captured by using the testing machine. Finally the discrete model of the tube with and without geometrical discontinuities presents very good agreements with the experimental results.

23 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Andres Blanco OrtegaAndres Blanco Ortega
Andres Blanco Ortega
LVLuis Vázquez-Sánchez
Luis Vázquez-Sánchez
MMManuel Adam Medina
Manuel Adam Medina
JCJorge Colin-Ocampo
Jorge Colin-Ocampo
APArturo Abundez Pliego
Arturo Abundez Pliego
CGCarlos Daniel Garcia-Beltran
Carlos Daniel Garcia-Beltran
In this paper, a portable exoskeleton for the rehabilitation of upper extremities of three degrees of freedom (DOF) is proposed. With these degrees of freedom, the exoskeleton provides the movements of flexion–extension and abduction–adduction of the arm and flexion–extension of the forearm. A robust generalized proportional integral (GPI) controller for trajectory tracking to provide smooth movements for rehabilitation with the exoskeleton is proposed. This controller only requires output measurements and is robust against different types of disturbances. Simulation results are presented in the MSC Adams® software environment in co-simulation with Matlab-Simulink® to show the controller’s performance against different types of disturbances. The results of a PID type controller are also contrasted with the results of the GPI controller.

23 November 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Oscar Rodríguez BenítezOscar Rodríguez Benítez
Oscar Rodríguez Benítez
Mario Ponce-SilvaMario Ponce-Silva
Mario Ponce-Silva
Juan AquiJuan Aqui
Juan Aqui
Abraham SanchezAbraham Sanchez
Abraham Sanchez
LVLuis Gerardo Vela-Valdés
Luis Gerardo Vela-Valdés
Claudia Cortes-GarciaClaudia Cortes-Garcia
Claudia Cortes-Garcia
This paper focuses on the main reasons of low efficiency in a current-fed DC-DC resonant converter applied to photovoltaic (PV) isolated systems, comparing the effects derived by the overlapping time in the gate-signals (gate-source voltage) combining silicon (Si), silicon carbide (SiC), and gallium nitride (GaN)-based power devices. The results show that unidirectional switches (metal–oxide–semiconductor field-effect transistors (MOSFETs) plus diode) present hard switching as a result of the diode preventing the MOSFET capacitance of being discharged. The effectiveness of the converter was verified with a 200-W prototype with an input voltage range of 0–30.3 V, an output voltage of 200 V, and a switching frequency of 200 kHz. The reduction losses by applying GaN versus Si and SiC technologies are 66.49% and 53.57%, respectively. Alternatively, by applying SiC versus Si devices the reduction loss is 27.84%. Finally, according to the results, 60% of losses were caused by the diodes on both switches.