With rapid increases in the number of vehicles over recent years, urban parking systems have encountered more and more challenges. In this paper, a dual-lens millimeter wave (MMW) radar antenna is designed for a smart parking system in the context of the Internet of Things (IoT). A flat dielectric punch lens is used to increase the gain of the transmitting antenna in order to compensate for the penetration loss in MMW. In addition, a dielectric rod lens is used to correct beam direction and maintain a wide beamwidth in order to overcome received energy loss due to scattering of the car chassis. The combined dual-lens antenna can improve the accuracy and stability of MMW radar operating at 24 GHz. The measured gain is 15.8 dBi for the transmitting antenna and 7.9 dBi for the receiving antenna, and the 3 dB beamwidth is approximately 65 degrees. The system measurement results show that the proposed antenna has stable measurement effect and is suitable for the MMW radar smart parking system.
Traumatic brain injury (TBI) is a major cause of mortality and disability worldwide. We validated the utility of plasma metabolomics analysis in the clinical diagnosis of acute TBI in a rat model of controlled cortical impact (CCI) using gas chromatography/mass spectrometry (GC/MS). Thirty Sprague-Dawley rats were randomly divided into two groups of 15 rats each: the CCI group and sham group. Blood samples were obtained from the rats within the first 24 h after TBI injury. GC/MS measurements were performed to evaluate the profile of acute TBI-induced metabolic changes, resulting in the identification of 45 metabolites in plasma. Principal component analysis, partial least squares-discriminant analysis, orthogonal partial least square discriminant analysis using hierarchical clustering and univariate/multivariate analyses revealed clear differences in the plasma metabolome between the acute CCI group and the sham group. CCI induced distinctive changes in metabolites including linoleic acid metabolism, amino acid metabolism, galactose metabolism, and arachidonic acid metabolism. Specifically, the acute CCI group exhibited significant alterations in proline, phosphoric acid, β-hydroxybutyric acid, galactose, creatinine, L-valine, linoleic acid and arachidonic acid. A receiver operating characteristic curve analysis showed that the above 8 metabolites in plasma could be used as the potential biomarkers for the diagnosis of acute TBI. Furthermore, this study is the first time to identify the galactose as a biomarker candidate for acute TBI. This comprehensive metabolic analysis complements target screening for potential diagnostic biomarkers of acute TBI and enhances predictive value for the therapeutic intervention of acute TBI.
15 April 2020 in IEEE Transactions on Instrumentation and Measurement
With the widespread use of vehicles, finding an empty parking space in a parking lot has become a problem that most drivers encounter daily, particularly in urban environments. In this paper, a 3D printing high-gain dielectric lens K-band antenna is designed for a smart parking radar system that performs dual-mode detection by using a magnetic sensor to improve the accuracy of parking space detection. The proposed antenna uses a wide-band high-efficiency electromagnetic structure (WHEMS) as the primary feed antenna. The primary antenna is etched on a substrate and can be easily integrated with an RF circuit. The WHEMS antenna has a wide bandwidth that is not influenced by instability in the substrate permittivity. Benefiting from low-cost, fast prototyping 3-D printing technology, a conformal flat semi-closed perforation dielectric lens is designed to achieve a high gain; this lens avoids the measurement unreliability caused by large penetration losses in the K-band. The K-band radar operates at 24~24.25 GHz, with a measured gain of 18.4 dBi. Measurements obtained from the developed system reveal that the proposed high-gain, low-cost, lightweight, durable, integrated design approach is well suited for a K-band radar smart parking system.
The measurement of the phased array antenna (PAA) is completely different from the traditional antenna, due to its multi beam patterns. Usually, each beam pattern of the PAA needs a separate measurement, which makes the overall time extremely long. Thus, the traditional method can no longer meet the efficiency and cost requirements of new PAA measurement. In this paper, a pattern reconstruction method is proposed which significantly reduce the measurement time of multi-beam PAAs. With the known array element patterns (AEP) and theoretical weighted port excitation of the beams, any beam pattern can be predicted by measuring only a certain beam pattern, due to the element excitation coefficient (including the matching, mutual coupling, and manufacturing factors, etc.) of the specific PAA being calculated. The approach has low reconstruction error in term of beam pointing accuracy, side lobe, and co-polar and cross-polar patterns while being validated for large scanning range. Through theoretical derivation and experiments, the effectiveness of the method is verified, and the testing efficiency of the phased array antenna can be improved by 10 times or even more.
27 January 2022 in International Journal of RF and Microwave Computer-Aided Engineering
In this article, a corrugated horn feed antenna with a stable phase center is designed for the millimeter wave compact antenna test range (CATR). The calculation method of the phase center of a horn is analyzed in this article. The 45°-plane phase center is used as the combined phase center of the horn in order to perform the phase center calculation only once, thus faster, and to optimize the phase performance more conveniently. By adding an absorbing material surrounding the edge of the outer surface of the horn, the irregular currents on the outer surface of the horn are suppressed, thus achieving a more stable phase center. The absorbing material can also reduce the radar cross section of the antenna. The designed corrugated horn works in the 24–40 GHz wide band with the following performances: the deviation of the phase center in the working frequency band is less than ±0.25 mm, the phase variation within a ±30° beam width is less than ±2.5°. Moreover, the measured return loss is lower than −10 dB, the measured gain is 8–12 dBi, and the measured cross-polarization level is less than −30 dB. The beamwidth is about 56°–70° in the whole band, and the beamwidth difference between different planes is less than 5°. The achieved targets listed above makes the proposed corrugated horn suitable for very precise antenna measurements in CATR systems.
This paper presents an approximate method that allows the calculation of the maximum measurable gain (MMG) in an anechoic chamber. This method is realized by using a low passive intermodulation (PIM) medium-gain directional antenna. By reducing the distance between the antenna and the wall of the chamber to reduce path loss, the purpose of replacing a high-gain antenna with a medium-gain antenna is achieved. The specific relationship between distance and equivalent gain is given in this paper. The measurement interval is determined by the 3 dB beamwidth of the measurement antenna to scan the whole chamber. A set of corresponding data for the residual PIM level and the MMG of the chamber can be obtained by the method of measurement outlined herein. The feasibility of this method was verified by measurements in two PIM measurement chambers.