In this paper, different control systems are reviewed, classified and analysed as well as intelligent speed adaptation systems (ACCs, ISA), their objectives and prototypes implemented in different countries. After this discussion, an adaptive speed control system, based on the geometric characteristics of the road, is presented. The SAGE system, developed in the INSIA (University Institute for Automobile Research), consists of a real time electronic device for the driver information about the optimum driving velocity, taking into account driving safety criteria. These criteria have been defined considering the geometric characteristics of the road and the dynamic behaviour of the vehicle. The prototype developed is presented, and also its strategy and functions.
15 May 2009 in IEEE Transactions on Industrial Electronics
Neural networks are widely used in pattern recognition, security applications, and robot control. We propose a hardware architecture system using tiny neural networks (TNNs) specialized in image recognition. The generic TNN architecture allows for expandability by means of mapping several basic units (layers) and dynamic reconfiguration, depending on the application specific demands. One of the most important features of TNNs is their learning ability. Weight modification and architecture reconfiguration can be carried out at run-time. Our system performs objects identification by the interpretation of characteristics elements of their shapes. This is achieved by interconnecting several specialized TNNs. The results of several tests in different conditions are reported in this paper. The system accurately detects a test shape in most of the experiments performed. This paper also contains a detailed description of the system architecture and the processing steps. In order to validate the research, the system has been implemented and configured as a perceptron network with back-propagation learning, choosing as reference application the recognition of shapes. Simulation results show that this architecture has significant performance benefits.
1 November 2015 in Journal of Network and Computer Applications
This paper discusses the target localization problem in wireless visual sensor networks. Additive noises and measurement errors will affect the accuracy of target localization when the visual nodes are equipped with low-resolution cameras. In the goal of improving the accuracy of target localization without prior knowledge of the target, each node extracts multiple feature points from images to represent the target at the sensor node level. A statistical method is presented to match the most correlated feature point pair for merging the position information of different sensor nodes at the base station. Besides, in the case that more than one target exists in the field of interest, a scheme for locating multiple targets is provided. Simulation results show that, our proposed method has desirable performance in improving the accuracy of locating single target or multiple targets. Results also show that the proposed method has a better trade-off between camera node usage and localization accuracy
18 February 2008 in Radiation Protection Dosimetry
The design of a national dose protocol for interventional radiology has been one of the tasks during the European SENTINEL Coordination Action. The present paper describes the pilot experience carried out in cooperation with the Spanish Society on Vascular and Interventional Radiology (SERVEI). A prospective sample of procedures was initially agreed. A common quality control of the X-ray systems was carried out, including calibration of the air kerma area product (KAP) meters. Occupational doses of the radiologists involved in the survey were also included in the survey. A total of 10 Spanish hospitals with interventional X-ray units were involved. Six hundred and sixty-four patient dose data were collected from 397 diagnostic and 267 therapeutic procedures. Occupational doses were evaluated in a sample of 635 values. The obtained KAP median/mean values (Gy·cm2) for the gathered procedures were: biliary drainage (30.6/68.9), fistulography (4.5/9.8), lower limb arteriography (52.2/60.7), hepatic chemoembolisation (175.8/218.3), iliac stent (45.9/73.2) and renal arteriography (39.1/59.8). Occupational doses (mean monthly values, in mSv) were 1.9 (over apron); 0.3 (under apron) and 4.5 (on hands). With this National experience, a protocol was agreed among the SENTINEL partners to conduct future similar surveys in other European countries.
Particle filters constitute themselves a highly powerful estimation tool, especially when dealing with non-linear non-Gaussian systems. However, traditional approaches present several limitations, which reduce significantly their performance. Evolutionary algorithms, and more specifically their optimization capabilities, may be used in order to overcome particle-filtering weaknesses. In this paper, a novel FPGA-based particle filter that takes advantage of evolutionary computation in order to estimate motion patterns is presented. The evolutionary algorithm, which has been included inside the resampling stage, mitigates the known sample impoverishment phenomenon, very common in particle-filtering systems. In addition, a hybrid mutation technique using two different mutation operators, each of them with a specific purpose, is proposed in order to enhance estimation results and make a more robust system. Moreover, implementing the proposed Evolutionary Particle Filter as a hardware accelerator has led to faster processing times than different software implementations of the same algorithm.