We demonstrated the long wavelength lasing of InGaN laser diodes under continuous wave condition at room temperature over . Two InGaN laser structures were adapted with different indium composition for InGaN optical confinement layers (OCLs) below quantum wells. The blue shift of electroluminescence (EL) was reduced in InGaN laser diodes grown on 3% In concentration in InGaN OCL compared with 1.5% In concentration in InGaN OCL. The EL peak for laser diode with 3% In concentration in InGaN OCL occurs at longer wavelength for all current levels compared to the laser with 1.5% In concentration in InGaN OCL. In addition, the laterally nonuniform InGaN wells grown on 1.5% In concentration in InGaN OCL was verified by the cross-sectional view of InGaN active layer using high-resolution transmission electron microscopy.
A DUV-LED with a graded superlattice electron blocking layer (GSL-EBL) is demonstrated to show improved carrier injection into the multi-quantum well region. The structures of modified EBLs are designed via simulation. The simulation results show the carrier behavior mechanism of DUV-LEDs with a single EBL (S-EBL), graded EBL (G-EBL), and GSL-EBL. The variation in the energy band diagram around the EBL region indicates that the introduction of GSL-EBL is very effective in enhancing carrier injection. Besides, all DUV-LEDs emitting at 280 nm are grown in the high temperature metal organic chemical deposition system. It is confirmed that the optical power of the DUV-LED with the GSL-EBL is significantly higher than that of the DUV-LED with the S-EBL and G-EBL.
We report deep ultraviolet (UVC) emitting core-shell-type AlGaN/AlN multiple quantum wells (MQWs) on the AlN nanorods which are prepared by catalyst/lithography free process. The MQWs are grown on AlN nanorods on a sapphire substrate by polarity-selective epitaxy and etching (PSEE) using high-temperature metal organic chemical vapor deposition. The AlN nanorods prepared through PSEE have a low dislocation density because edge dislocations are bent toward neighboring N-polar AlN domains. The core–shell-type MQWs grown on AlN nanorods have three crystallographic orientations, and the final shape of the grown structure is explained by a ball-and-stick model. The photoluminescence (PL) intensity of MQWs grown on AlN nanorods is approximately 40 times higher than that of MQWs simultaneously grown on a planar structure. This result can be explained by increased internal quantum efficiency, large active volume, and increase in light extraction efficiency based on the examination in this study. Among those effects, the increase of active volume on AlN nanorods is considered to be the main reason for the enhancement of the PL intensity.
Realization of phosphor-free white-light emitters is becoming an important milestone on the road to achieve high quality and reliability in high-power white-light-emitting diodes (LEDs). However, most of reported methods have not been applied to practical use because of their difficulties and complexity. In this study we demonstrated a novel and practical growth method for phosphor-free white-light emitters without any external processing, using only in-situ high-density GaN nanostructures that were formed by overgrowth on a silicon nitride (SiNx) interlayer deposited by metal organic chemical vapor deposition. The nano-sized facets produced variations in the InGaN thickness and the indium concentration when an InGaN/GaN double heterostructure was monolithically grown on them, leading to white-color light emission. It is important to note that the in-situ SiNx interlayer not only facilitated the GaN nano-facet structure, but also blocked the propagation of dislocations.