Byeongchan So

Dr. Byeongchan So


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2018 in RSC Advances
Verified
Journal Article
Open access
PDF file
BSByeongchan So
Byeongchan So
JKJinwan Kim
Jinwan Kim
TKTaemyung Kwak
Taemyung Kwak
TKTaeyoung Kim
Taeyoung Kim
JLJoohyoung Lee
Joohyoung Lee
ONOkhyun Nam
Okhyun Nam
A DUV-LED with a graded superlattice electron blocking layer (GSL-EBL) is demonstrated to show improved carrier injection into the multi-quantum well region. The structures of modified EBLs are designed via simulation. The simulation results show the carrier behavior mechanism of DUV-LEDs with a single EBL (S-EBL), graded EBL (G-EBL), and GSL-EBL. The variation in the energy band diagram around the EBL region indicates that the introduction of GSL-EBL is very effective in enhancing carrier injection. Besides, all DUV-LEDs emitting at 280 nm are grown in the high temperature metal organic chemical deposition system. It is confirmed that the optical power of the DUV-LED with the GSL-EBL is significantly higher than that of the DUV-LED with the S-EBL and G-EBL.

1 July 2019 in AIP Advances
Verified
Journal Article
Open access
PDF file
SYSung Tae Yoo
Sung Tae Yoo
BSByeongchan So
Byeongchan So
HLHye In Lee
Hye In Lee
ONOkhyun Nam
Okhyun Nam
KPKyu Chang Park
Kyu Chang Park
Large area deep ultraviolet (DUV) light is generated by carbon nanotube (CNT) cold cathode electron beam (C-beam) irradiation on Al0.47Ga0.53N/Al0.56Ga0.44N multi quantum wells (MQWs) anode. We developed areal electron beam (EB) with CNT cold cathode emitters. The CNT emitters on silicon wafer were deposited with an area of 188 mm2, and these were vertically aligned and had conical structures. We optimized the C-beam irradiation conditions to effectively excite AlGaN MQWs. When AlGaN MQWs were excited using an anode voltage of 3 kV and an anode current of 0.8 mA, DUV with a wavelength of 278.7 nm was generated in a large area of 303 mm2. This DUV area is more than 11 times larger than the light emitting area of conventional EB pumped light sources and UV-LEDs.

1 December 2014 in Journal of Crystal Growth
Verified
Journal Article
Closed access
SWSeohwi Woo
Seohwi Woo
MKMinho Kim
Minho Kim
BSByeongchan So
Byeongchan So
GYGeunho Yoo
Geunho Yoo
JJJongjin Jang
Jongjin Jang
ONOkhyun Nam
Okhyun Nam

19 December 2019 in Solid-State Electronics
Verified
Journal Article
Closed access
JLJuhun Lee
Juhun Lee
HJHyunwoo Jang
Hyunwoo Jang
TKTaemyung Kwak
Taemyung Kwak
UCUiho Choi
Uiho Choi
BSByeongchan So
Byeongchan So
ONOkhyun Nam
Okhyun Nam

1 April 2021 in AIP Advances
Verified
Journal Article
Open access
PDF file
BSByeongchan So
Byeongchan So
JLJunchae Lee
Junchae Lee
CCChangheon Cheon
Changheon Cheon
JLJoohyung Lee
Joohyung Lee
UCUiho Choi
Uiho Choi
ONOkhyun Nam
Okhyun Nam
Creating voids between thin films is a very effective method to improve thin film crystal quality. However, for AlN material systems, the AlN layer growth, including voids, is challenging because of the very high Al atom sticking coefficient. In this study, we demonstrated an AlN template with many voids grown on AlN nanorods made by polarity selective epitaxy and etching methods. We introduced a low V/III ratio and NH3 pulsed growth method to demonstrate high-quality coalesced AlN templates grown on AlN nanorods in a metal organic chemical vapor deposition reactor. The crystal quality and residual strain of AlN were enhanced by the void formations. It is expected that this growth method can contribute to the demonstration of high-performance deep UV LEDs and transistors.

1 August 2020 in Thin Solid Films
Verified
Journal Article
Closed access
BSByeongchan So
Byeongchan So
CCChangheon Cheon
Changheon Cheon
JLJoohyoung Lee
Joohyoung Lee
JLJunchae Lee
Junchae Lee
TKTaemyung Kwak
Taemyung Kwak
ONOkhyun Nam
Okhyun Nam