The power conversion efficiencies (PCEs) of Perovskite solar cells (PSCs) have seen significant performance improvements between 2012 and 2022. PSCs have excellent optoelectronic properties and can be built using low-cost materials. In order to compete with first-generation photovoltaic technologies, it will be necessary to scale up production. This review article explores the advancements in several scalable perovskite deposition techniques, including recent developments in the fabrication of high-quality perovskite film, their stabilities and commercialization status. Several scalable deposition techniques are discussed, including user-friendly solution-techniques (spin coating, slot die coating, etc.), vapour-assisted deposition approaches in the laboratory and full-scale commercial applications. The aforementioned deposition techniques have advantages compared to deposition techniques based on cost, effective mask-less patterning and unparalleled-design freedom. Other potential advantages include optimal use of materials, scalability, contactless deposition in high-resolution and a rapid transformation from small laboratory-scale work to large industrial-scale roll-to-roll production. Most recent technological advancements and structural developments relate to long-term thermal stability and moisture resistance. Many of the developments are still in the evolving field of lab-scale devices. The improvement roadmap and commercialization aspects of PSC manufacture involve two significant milestones: bridging the gap between the performance characteristics of small-scale and large-scale devices and the scalable printing techniques for all the layers in the device.
This study explored the applications of liquid hydrogen (LH2) in aerospace projects, followed by an investigation into the efficiency of ramjets, scramjets, and turbojets for hypersonic flight and the impact of grey, blue, and green hydrogen as an alternative to JP-7 and JP-8 (kerosene fuel). The advantage of LH2 as a propellant in the space sector has emerged from the relatively high energy density of hydrogen per unit volume, enabling it to store more energy compared to conventional fuels. Hydrogen also has the potential to decarbonise space flight as combustion of LH2 fuel produces zero carbon emissions. However, hydrogen is commonly found in hydrocarbons and water and thus it needs to be extracted from these molecular compounds before use. Only by considering the entire lifecycle of LH2 including the production phase can its sustainability be understood. The results of this study compared the predicted Life Cycle Assessment (LCA) emissions of the production of LH2 using grey, blue, and green hydrogen for 2030 with conventional fuel (JP-7 and JP-8) and revealed that the total carbon emissions over the lifecycle of LH2 were greater than kerosene-derived fuels.
Electric vehicles have zero tailpipe emissions and can reduce greenhouse gas emissions by up to 90% compared to internal combustion engine (ICE) vehicles. Electric retrofits involve converting an ICE vehicle to an electric drivetrain, aiding the transition to zero emission vehicles by adapting current vehicles and, thus, reducing the transport sector emissions. Other benefits include charge exemptions in major cities, reduced driving costs, and lower maintenance. The UK has a considerable retrofit market, with a large price range of services offered. There is a varying level of practice undertaken and current regulations may not adequately cover these retrofits. Industrial engagement has highlighted the varying levels and common themes of practice, such as restoration work, computer-aided design, and finite element analysis. Converting the registered fuel type of a vehicle to electricity, post-retrofit, appears to be a limited process, with few steps. Therefore, a regulatory framework, such as an accreditation scheme, could be introduced to ensure high levels of safety and good practice. Future work suggestions include further meetings with the DVLA and DVSA, and meeting the Motor Insurers’ Bureau.