Although market prediction for smart textiles in the coming years is high, their washability will be among the main criteria for their mass adoption. Hence, the need to understand precisely how the washing process can damage them. Therefore, the best care instructions can be determined and serve as guidelines for smart textile manufacturers to control the quality of their smart garments as well as their customers to wash them cautiously. In this study, only the sensing part, silver-plated-nylon electrode sensors, is taken into account. To determine the chemical and the mechanical impacts of the machine-washing process separately and simultaneously, textile electrodes were put in different washing conditions: with and without bleaching agents, with and without mechanical constraints, etc. Then spectrophotometry, Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to characterize these electrodes. Results show that liquid detergents should be preferred to powder ones. Indeed, the latter contain bleaching agents that tend to oxidize the silver layer, making it more vulnerable to the mechanical rubbings that tear off the silver layer progressively washes after washes. As a consequence, the silver-plated-nylon loses rapidly its conductivity so that the electrode is no longer able to sense biopotentials.

Around 15% of children still wet their bed after five years old. Although bedwetting alarms have proven to be effective to achieve nighttime dryness, they are cumbersome so children could be reluctant to use them. Therefore, the moisture sensor and wire were made unobtrusive by seamlessly integrated them into fully textile underwear by using conductive yarns. Consequently, the alarm acceptability should be enhanced by improving children’s comfort. Three conductive textile metallic yarns, made of silver or stainless steel, were considered to fabricate the urine leakage sensor. Silver-plated-nylon yarn, which showed the highest electrical conductivity, outperformed the stainless-steel yarns regarding its ability to detect urine leakage as well as its detection speed. Furthermore, it was proven to withstand multiple urine soakings and the following machine-washings, even at high temperature (60 °C). However, the electrical current, necessary to detect the leakage, tends to corrode the silver. Therefore, the detection circuit was adapted. Eventually, the designed leakage sensor was seamlessly integrated into a child’s trunk underwear, into which a miniaturized alarm can be plugged. The resulting textile underwear aims at replacing the rigid alarm system currently available, hence improving the quality of life of enuretic children and help them achieving nighttime dryness.

Purpose: Unlike other materials, textiles associate with aesthetic and mechanical properties such as flexibility and removability that allow them to be deployed or folded as required and which make them good candidates for clothing and furnishing but also, eventually, for other applications such as building. Actually, the clothing should ensure appropriate heat and mass transfers between the human body and its environment in order to maintain the thermo-physiological comfort. For that, it is important to determine water vapor permeability (WVP) of textile. Several normalized procedures with variants depending on the nature of the tested material exist to measure the WVP. One of the methods used is the “dish method” described by the British Standard (BS 7209). The purpose of this paper is to determine the influence of the test parameters on the WVP measurements.Design/methodology/approach: Consequently, WVP of different textiles was measured while varying several parameters like: nature of fabrics, air layer thickness, vapor pressure gradient and air velocity.Findings: A decrease in the WVP values was observed with an increase in the air layer thickness and the number of textile layers. On the other side, an increase in the water pressure gradient induces an increase in the WVP value. Finally, it was also observed that air velocity has an impact on the WVP measurements.Originality/value: In addition to intrinsic properties of fabrics, i.e., nature of fiber, woven structure, the influence of the several extrinsic properties, i.e., the influence of the air layer thickness, the number of textile layers, the vapor pressure gradient and the air velocity, on the WVP were investigated. Some researchers have already investigated the impact of these parameters on the WVP measurement separately. However, this study presents a difference from other studies that it takes into account the influence of the both intrinsic and extrinsic properties on WVP. In addition to these, this work combine several extrinsic properties which are presented separately during other studies. The first time, in this study the influence of the air velocity on WVP was investigated. Results on both hydrophilic and hydrophobic fabrics showed a great variation in the results when varying the location of the cups inside the climatic chamber. This is the reason why future studies look at studying more deeply the effect of air velocity on the WVP properties on different types of fabrics by connecting WVP values with air velocity values. It is also planned to make tests with the rotation device and by fixing the value of the temperature and RH. The objective will be to obtain reliable values that do not take into account the effect of air velocity.

(1) Background: millions of people, from children to the elderly, suffer from bladder dysfunctions all over the world. Monitoring bladder fullness with appropriate miniaturized textile devices can improve, significantly, their daily life quality, or even cure them. Amongst the existing bladder sensing technologies, bioimpedance spectroscopy seems to be the most appropriate one to be integrated into textiles. (2) Methods: to assess the feasibility of monitoring the bladder fullness with textile-based bioimpedance spectroscopy; an innovative lab-bench has been designed and fabricated. As a step towards obtaining a more realistic pelvic phantom, ex vivo pig’s bladder and skin were used. The electrical properties of the fabricated pelvic phantom have been compared to those of two individuals with tetrapolar impedance measurements. The measurements’ reproducibility on the lab bench has been evaluated and discussed. Moreover, its suitability for the continuous monitoring of the bladder filling has been investigated. (3) Results: although the pelvic phantom failed in reproducing the frequency-dependent electrical properties of human tissues, it was found to be suitable at 5 kHz to record bladder volume change. The resistance variations recorded are proportional to the conductivity of the liquid filling the bladder. A 350 mL filling with artificial urine corresponds to a decrease in resistance of 7.2%, which was found to be in the same range as in humans. (4) Conclusions: based on that resistance variation; the instantaneous bladder fullness can be extrapolated. The presented lab-bench will be used to evaluate the ability of textiles electrodes to unobtrusively monitor the bladder volume.

Volatile organic compounds (VOCs) have the potential to serve as biomarkers for respiratory diseases such as asthma. Non-invasive respiratory analysis can be used for early detection and disease monitoring. This paper presents the development of a ZnO metal oxide nanofibers sensor as a cost-effective method for detecting NO, which is an asthma biomarker, and NO₂, that can cause asthma. Electrospun metal oxide nanofibers are considered for gas sensor applications due to their unique structural and electrical properties. The results indicate that the amount of zinc acetate and the morphology of the ZnO nanofibers as a sensing medium can affect the sensitivity of the gas sensor. The preparation of electrospinning solutions containing varying amounts of zinc acetate must be carefully considered due to its impact on morphology and thus sensitivity.