Organometal halide perovskites are highly promising materials for photovoltaic applications, yet their rapid degradation remains a significant challenge. Here, the light-induced structural degradation mechanism of methylammonium lead iodide (MAPbI3) perovskite films and devices is studied in low humidity environment using X-Ray Diffraction, Ultraviolet-Visible (UV-Vis) absorption spectroscopy, Extended X-ray Absorption Fine Structure spectroscopy, Fourier Transform Infrared spectroscopy, and device measurements. Under dry conditions, the perovskite film degrades only in the presence of both light and oxygen, which together induce the formation of halide anions through donation of electrons to the surrounding oxygen. The halide anions generate free radicals that deprotonate the methylammonium cation and form the highly volatile CH3NH2 molecules that escape and leave pure PbI2 behind. The device findings show that changes in the local structure at the TiO2 mesoporous layer occur with light, even in the absence of oxygen, and yet such changes can be prevented by the application of UV blocking layer on the cells. Our results indicate that the stability of mp-TiO2-MAPbI3 photovoltaics can be dramatically improved with effective encapsulation that protects the device from UV light, oxygen, and moisture.
1 July 2016 in Journal of Renewable and Sustainable Energy
A Luminescent Solar Concentrator (LSC) greenhouse and an identical control greenhouse were constructed with photovoltaic (PV) cells attached to the roof panels of both structures. The placement and types of PV cells used in the LSC panels were varied for performance comparisons. Solar power generation was monitored continuously for one year, with leading LSC panels exhibiting a 37% increase in power production compared to the reference. The 22.3 m2 greenhouse was projected to generate a total of 1342 kWh per year, or 57.4 kWh/m2 if it were composed solely of the leading panel of Criss Cross panel design. The LSC panels showed no signs of degradation throughout the trial demonstrating the material's robustness in field conditions.
Amorphous selenium (a-Se) is a glass-former capable of deposition at high rates by thermal evaporation over a large area. It was chosen as a direct conversion material due to its appealing properties for imaging in both low and high X-ray energy ranges (<30 keV and <30 keV, respectively). It has a bandgap of 2.2 eV and can achieve high photodetection efficiency at short wavelengths less than 400 nm which makes it appealing for indirect conversion detectors. The integration of a-Se with readout integrated circuits started with thin-film transistors for digital flat panel X-ray detectors. With increasing applications in life science, biomedical imaging, X-ray imaging, high energy physics, and industrial imaging that require high spatial resolution, the integration of a-Se and CMOS is one direct way to improve the high-contrast visualization and high-frequency response. Over the past decade, significant improvements in a-Se/CMOS technologies have been achieved with improvements to modulation transfer function and detective quantum efficiency. We summarize recent advances in integrating and photon-counting detectors based on a-Se coupled with CMOS readout and discuss some of the shortcomings in the detector structure, such as low charge conversion efficiency at low electric field and high dark current at high electric field. Different pixel architectures and their performance will be highlighted.