劉文豐(Wen-Fung Liu)

Prof. Dr. 劉文豐(Wen-Fung Liu)


Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2017 in Sensors
Verified
Journal Article
Open access
PDF file
HCHung-Ying Chang
Hung-Ying Chang
YCYu-Chung Chang
Yu-Chung Chang
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
We present a novel two-dimensional fiber-optic inclinometer with high sensitivity by crisscrossing two etched chirped fiber Bragg gratings (CFBG) arrays. Each array is composed of two symmetrically-arranged CFBGs. By etching away most of the claddings of the CFBGs to expose the evanescent wave, the reflection spectra are highly sensitive to the surrounding index change. When we immerse only part of the CFBG in liquid, the effective index difference induces a superposition peak in the refection spectrum. By interrogating the peak wavelengths of the CFBGs, we can deduce the tilt angle and direction simultaneously. The inclinometer has a resolution of 0.003° in tilt angle measurement and 0.00187 rad in tilt direction measurement. Due to the unique sensing mechanism, the sensor is temperature insensitive. This sensor can be useful in long term continuous monitoring of inclination or in real-time feedback control of tilt angles, especially in harsh environments with violent temperature variation.

18 February 2020 in IEEE Photonics Journal
Verified
Journal Article
Open access
LCLee Cheng-Ling
Lee Cheng-Ling
RZRui-Cheng Zeng
Rui-Cheng Zeng
CYChun-Ren Yang
Chun-Ren Yang
CLChi-Feng Lin
Chi-Feng Lin
Chao-Tsung MaChao-Tsung Ma
Chao-Tsung Ma
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
This work proposes a novel, highly sensitive, and simple structure based on a tapered polymer as a tilt fiber sensor to sensitively measure tilt angles (θ). The fiber-optic tilt sensor consists of a tapered polymer and single-mode fibers (SMF), into which the tapered polymer to generate a bent in the sensor that is strongly correlated with θ. The used tapered polymer in the tilt sensing is the temperature (T) insensitive. It is further combined with a general fiber Bragg grating (FBG) as a temperature indicator for achieving simultaneous measurement of inclination (θ) and ambient T. The endface of the fiber is coated with a gold film to increase the light reflectivity and improve the measurement range. Experimental results show that when the sensor tilts, the reflective optical power changes significantly with high sensitivity, and the peak wavelength of FBG shifts when T varies. Both parameters can be measured simultaneously with good discrimination. An average tilt angle sensitivity of approximately 4.23 dB/deg. and a high resolution of 0.009 deg. are achieved in a θ variation from −6 to +6 deg. Simulations were performed and the numerical results were in good agreement with the experimental measurement.

10 July 2018 in Sensors
Verified
Journal Article
Open access
PDF file
CHChuan-Ying Huang
Chuan-Ying Huang
PCPei-Wen Chan
Pei-Wen Chan
HCHung-Ying Chang
Hung-Ying Chang
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
A novel fiber anemometer based on two pairs of fiber gratings is experimentally demonstrated and can simultaneously detect wind speed and wind direction. One pair of gratings, which are separated by 90° in space, is fixed on a small stainless steel pipe driven by a rotating disc for measuring the wind-direction angle. The other pair is composed of a sensing and a matched grating. The frequency of the spectrum-shifted of the sensing grating to overlap with that of the matched grating is employed for determining the wind speed. The errors in the wind-speed and wind-angle measurements are experimentally demonstrated to be less than 1%. The proposed fiber anemometer with a simple and durable structure can be applied in wind-powered electricity generators.

1 February 2004 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
CCChung-En Chou
Chung-En Chou
NSNai-Hsiang Sun
Nai-Hsiang Sun
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
The gain-flattening filter of an erbium-doped fiber amplifier is experimentally demonstrated by using the technology of etching long-period gratings (LPGs). An error of gain flatness less than 1 dB is obtained by using three cascaded LPGs with different cladding diameters in the range from 1536 to 1565 nm. © 2004 Society of Photo-Optical Instrumentation Engineers.

11 April 2022 in Photonics
Verified
Journal Article
Open access
PDF file
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
JLJia-Guan Li
Jia-Guan Li
HCHung-Ying Chang
Hung-Ying Chang
MFMing-Yue Fu
Ming-Yue Fu
CCChi-Fang Chen
Chi-Fang Chen
We propose a new type of fiber hydrophone composed of an etched fiber Bragg grating and a special packaging structure for detecting acoustic waves in the low-frequency band under water. The operating mechanism is based on the mechanical vibration of the fiber Bragg grating from the induced vibrating stress of acoustic pressure. The induced pressure of acoustic waves pushes the silicone rubber thin film, causing its vibration and then stretching the fiber Bragg grating, thus resulting in the grating wavelength shift which is overlapped with a tunable laser. The variation in the overlapped light intensity is transferred to an electrical signal by using a photodetector. From the experimental results, we can determine that the smaller the fiber diameter, the higher the sensitivity and frequency response. In order to confirm that this FBG hydrophone has the ability to work in high-frequency acoustic waves, this fiber grating hydrophone and a standard piezoelectric hydrophone are experimentally compared to in the same test conditions in the frequency range from 4 to 10 kHz. According to the experimental results, the fiber grating hydrophone has better responsivity than that of the conventional hydrophone. Due to the unique sensing structure design, this wide-band fiber hydrophone can be useful in long-term continuous monitoring of acoustic waves.

11 February 2022 in Photonics
Verified
Journal Article
Open access
PDF file
JCJeson Chen
Jeson Chen
SHSi-Yu Huang
Si-Yu Huang
CLCheng-Yu Lin
Cheng-Yu Lin
劉L劉文豐(Wen-Fung Liu)
劉文豐(Wen-Fung Liu)
A new type of low-frequency magnetic-field sensor based on fiber Bragg gratings (FBGs) was experimentally demonstrated for measuring the DC to low-frequency magnetic field. The operating mechanism of this AC magnetic sensor is based on the strain exerted by a loaded magnet on the sensing structure, which causes center-wavelength shifts of FBG. The achieved sensitivity was 8.16 pm/G with a resolution of 3 Gauss at ambient conditions. The proposed FBG magnetic sensor is easy to use, compact, and suitable for DC to low-frequency magnetic sensing applications.