Fiber-reinforced rubber composites with integrated shape memory alloy (SMA) actuator wires present a promising approach for the creation of soft and highly elastic structures with adaptive functionalities for usage in aerospace, robotic, or biomedical applications. In this work, the flat-knitting technology is used to develop glass-fiber-reinforced fabrics with tailored properties designed for active bending deformations. During the knitting process, the SMA wires are integrated into the textile and positioned with respect to their actuation task. Then, the fabrics are infiltrated with liquid silicone, thus creating actively deformable composites. For dimensioning such structures, a comprehensive understanding of the interactions of all components is required. Therefore, a simulation model is developed that captures the properties of the rubber matrix, fiber reinforcement, and the SMA actuators and that is capable of simulating the active bending deformations of the specimens. After model calibration with experimental four-point-bending data, the SMA-driven bending deformation is simulated. The model is validated with activation experiments of the actively deformable specimens. The simulation results show good agreement with the experimental tests, thus enabling further investigations into the deformation mechanisms of actively deformable fiber-reinforced rubbers.

Soft actuators are a promising option for the advancing fields of human-machine interaction and dexterous robots in complex environments. Shape memory alloy wire actuators can be integrated into fiber rubber composites for highly deformable structures. For autonomous, closed-loop control of such systems, additional integrated sensors are necessary. In this work, a soft actuator is presented that incorporates fiber-based actuators and sensors to monitor both deformation and temperature. The soft actuator showed considerable deformation around two solid body joints, which was then compared to the sensor signals, and their correlation was analyzed. Both, the actuator as well as the sensor materials were processed by braiding and tailored fiber placement before molding with silicone rubber. Finally, the novel fiber-rubber composite material was used to implement closed-loop control of the actuator with a maximum error of 0.5°.

Natural muscles, that convert chemical energy derived from glucose into mechanical and thermal energy, are capable of performing complex movements. This natural muscle power was the only way to perform mechanical work in a targeted manner for millions of years. In the course of thousands of years of technical development, mankind has succeeded in harnessing various physical and chemical phenomena to drive specific mechanical processes. Wind and water power, steam and combustion engines or electric motors are just a few examples. However, in order to make the diversity and flexibility of natural motion patterns usable for machines, attempts have been made for many years to develop artificial muscles. These man-made smart materials or structures are able to react to environmental conditions by significantly changing their shape or size. For the design of effective artificial muscles that closely resemble the natural original, the usage of textile technology offers great advantages. By means of weaving, individual actuators can be parallelized, which enables the transmission of greater forces. By knitting the maximum stretching performance can be enhanced by combining the intrinsic stretching capacity of the actuators with the structural-geometric stretching capacity of the fabric. Furthermore textile production techniques are well suited for the requirement-specific, individual placement of actuators in order to achieve the optimal geometry for the respective needs in every load case. Ongoing technical development has created fiber based and non-fibrous artificial muscles that are capable of mimicking and even out-performing their biological prodigy. Meanwhile, a large number of partly similar, but also very different functional principles and configurations were developed, each with its own specific characteristics. This paper provides an overview of the relevant and most promising technical approaches for realizing artificial muscles, classifies them to specific material types and explains the mechanisms used as well as the possible textile applications.

The present contribution aims towards a thermo-electro-mechanical characterization of dielectric elastomer actuators (DEA) based on polydimethylsiloxane (PDMS). To this end, an experimental setup is proposed in order to evaluate the PDMS-based DEA behavior under the influence of various rates of mechanical loading, different ambient temperatures, and varying values of an applied electric voltage. To obtain mechanical, electro-mechanical and thermo-mechanical experimental data, the passive behavior of the material, as well as the material’s response when electrically activated, was tested. The influence of the solid electrode on the dielectric layer’s surface was also examined. Moreover, this work focuses on the production of such DEA, the experimental setup and the interpretation and evaluation of the obtained mechanical hysteresis loops. Finite element modeling approaches were used in order to model the passive and the electro-mechanically active response of the material. A comparison between experimental and simulation results was performed.

Electrically conductive filaments are used in a wide variety of applications, for example, in smart textiles and soft robotics. Filaments that conduct electricity are required for the transmission of energy and information, but up until now, most electrically conductive fibers, filaments and wires offer low mechanical elongation. Therefore, they are not well suited for the implementation into elastomeric composites and textiles that are worn close to the human body and have to follow a wide range of movements. In order to overcome this issue, the presented study aims at the development of electrically conductive and elastic filaments based on a coating process suited for multifilament yarns made of thermoplastic polyurethane (TPU). The coating solution contains TPU, carbon nanotubes (CNT) and N-Methyl-2-pyrrolidone (NMP) with varied concentrations of solids and electrically conductive particles. After applying the coating to TPU multifilament yarns, the mechanical and electrical properties are analyzed. A special focus is given to the electromechanical behavior of the coated yarns under mechanical strain loading. It is determined that the electrical conductivity is maintained even at elongations of up to 100%.