shan ma

Dr. shan ma

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2018 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Verified
Journal Article
Closed access
SMshan ma
shan ma
WCWuli Chu
Wuli Chu
HZHaoguang Zhang
Haoguang Zhang
XLXiangjun Li
Xiangjun Li
HKHaiyang Kuang
Haiyang Kuang
In the current study, the effects of micro-vortex generators on the flow characteristics of a high-load compressor cascade are investigated, and four types of micro-vortex generators including “rectangular,” “curved rectangular,” “trapezoidal,” and “curved trapezoidal” are considered and named VGR, VGCR, VGT, and VGCT separately. The calculated results show that a rising reverse flow region, which is considered a main reason for occurring stall at +8° incidence, collapses rapidly from the leading edge in the cascade. Therefore, the micro-vortex generators are all mounted on the end-wall in front of the passage to suppress the development of the secondary flow, and the stall occurrence is delayed from +8° to +11° incidence by applying VGCT. At the design condition, the VGT can make the total pressure loss decrease by 0.54%. The modified micro-vortex generators show an obvious superiority when the range of incidence is between +3° and +8°. At the stall condition, the VGCT can make the total pressure loss decrease by 9.36%. Moreover, the reduction of the secondary flow loss is considered a main goal of the adoption of micro-vortex generators which is an achievement for decreasing the total pressure loss, and the highest reduction of the secondary flow loss reaches 34.6% at the stall condition in the cascade with VGCT.

1 January 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
LCLin Cheng
Lin Cheng
He-xia HuangHe-xia Huang
He-xia Huang
XSXiao-Lin Sun
Xiao-Lin Sun
SMshan ma
shan ma
HTHui-Jun Tan
Hui-Jun Tan
A plasma synthetic jet actuator with a high-frequency oblique slot was designed for supersonic flow control. The actuator's periodic operation characteristics were investigated using electrical parameter measurements and high-speed schlieren techniques. Experimental findings indicate that the actuator can stably operate within the frequency range of 0–2400 Hz. With increasing operating frequency, the breakdown voltage, maximum current, and discharge energy decrease, while the energy efficiency of the discharge increases. Moreover, the experiment revealed for the first time that an increase in the number of charged particles within the cavity leads to a decrease in breakdown voltage, and the concentration of charged particles reaches saturation at approximately 1200 Hz. High-speed schlieren observations indicate substantial inter-cycle influences in the periodic jet. At higher operating frequencies, the impact of inter-cycle flow field effects becomes more pronounced. The oblique slot plasma synthetic jet exhibits clear directionality in the distribution of shock waves and jet. The oblique slot jet also shows a significant wall attachment effect. These characteristics are beneficial for enhancing the flow control capability of the actuator. At 1200 Hz, the actuator achieves a discharge efficiency of 63% and a maximum jet front velocity of 309 m/s, showcasing its superior overall performance.

20 January 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
SMshan ma
shan ma
WCWuli Chu
Wuli Chu
XSXiaolin Sun
Xiaolin Sun
ZGZhengtao Guo
Zhengtao Guo
SYSong Yan
Song Yan
The axial location of full-span boundary layer suction is studied to explore the influences of suction slot on the cascade performance. At the design condition, the slot with 50% axial location shows a superior capability to reduce the total pressure loss. At the near stall condition, the more upstream of the suction slot is moved, the more total pressure loss is reduced, and the suction slot with a location of 0.7 axial chord length cannot effectively reduces the total pressure loss in all conditions. Moreover, a rearranged segmented suction slot according to the distribution characteristics of the flow reversal region is developed and compared with full-span boundary layer suction. The segmented suction slot shows significant advantages in delaying the stall occurrence, and the stall point is delayed from 7.9° to 10.0° compared with the baseline. According to a quantitative analysis method selected to measure the performances of flow control technologies, the wake loss is significantly reduced by the segmented suction slot. Finally, a set of micro-vortex generator is introduced in the cascade with a segmented suction slot, and the conclusion indicates that the portion near the end-wall is very effective to reduce the flow loss.

14 October 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
SMshan ma
shan ma
XSXiaolin Sun
Xiaolin Sun
The development of boundary layer affects the compressor cascade performance to a certain extent. Therefore, the compound lean and little blades are selected to redistribute the boundary layer, and the influences of these two flow control technologies on the axial compressor cascade performance are further studied. The calculated results showed that appropriate high pressure region on the blade suction surface near the end-wall is helpful to reduce the total pressure loss of compressor cascade, which can be achieved by positive lean technique. Meanwhile, the maximum stable operation boundary can be expanded by the application of positive leaned blade. On the other hand, the introduction of negative lean angle not only increases the total pressure loss of cascade, but reduces the stable operation range. As the little blades are introduced in the negative lean compressor cascade, the stable operation range is significantly improved by the introduction of little blades. Especially the cascade with −10° lean angle, the maximum stable operation boundary is increased from 1° to 6°. In the positive lean compressor cascade, although more low-energy fluid is accumulated on the blade suction surface near the mid-span, the little blades still show an active role in reducing the total pressure loss and expending the stable operation range, because the influence range of induced vortex reaches 30%span. The results provide a reference for improving the aerodynamic performance of compressor stator, especially when more low-energy fluid is blocked in the range near the mid-span.

1 November 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
LCLin Cheng
Lin Cheng
He-xia HuangHe-xia Huang
He-xia Huang
XSXiao-Lin Sun
Xiao-Lin Sun
SMshan ma
shan ma
HTHuijun Tan
Huijun Tan
In the field of flow control research, oblique jets are known to offer several advantages over vertical jets. To gain a comprehensive insight into the flow field characteristics of a plasma synthetic jet actuator with an oblique-slot exit, the related experiments are conducted. The experiment employed high-speed schlieren imaging techniques and electrical parameter measurements to acquire the flow field characteristics and discharge properties of the oblique-slot actuator, followed by a comparative analysis with a vertical circular orifice actuator. The oblique-slot plasma synthetic jet exhibits a wall-attaching effect and asymmetric flow characteristics, which differ from those of the vertical circular orifice actuator. The actuator generates a wall jet with an initial velocity of 389.5 ± 15.08 m/s, effectively propelling the fluid within the boundary layer. The Mach number of the precursor shock wave in the direction of the jet reaches 1.59, but decreases to just 1.02 in the opposite direction. Over a period in the range of 10–70 μs, the Froude number of the plasma jet decreases from 1841 to 238. The dominant role of the inertial force gradually weakens, while the influence of buoyancy increases, causing the jet boundary to move upward. The oblique-slot jet configuration represents a typical planar jet, exhibiting superior flow control uniformity compared with the vertical circular orifice jet. The results indicate that the high-speed oblique-slot plasma synthetic jet actuator designed in this study possesses distinct advantages over vertical circular orifice actuators for high-speed fluid flow control.

10 May 2023 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
PDF file
FLFengming Li
Fengming Li
GZGanchao Zhao
Ganchao Zhao
LYLu Ye
Lu Ye
DYDongfeng Yan
Dongfeng Yan
SMshan ma
shan ma
To develop an effective suction slot arrangement, computational fluid dynamics simulation software and a high subsonic compressor cascade were used to simulate different suction slots. Based on the effects of various suction slots on the cascade performance under various operating conditions, a novel segmented suction slot structure Seg3 was proposed. The results of the study revealed that in the vicinity of the operating conditions ( ), a full-blade height suction slot should be installed at least 5% of the chord length downstream of the corner separation point to effectively remove the separation. For small and medium incidences, the best performance was observed for suction slot SS5, which was located at 60% of the chord length downstream of the leading edge. Analyzing the effects of SS5 and Seg3 on the cascade performance revealed that when the incidence was less than 4°, the reductions in the total pressure loss coefficients for ζsuc of SS5 and Seg3 both exceeded 8.2%. When the incidence was 4° or greater, the ζsuc increased slightly for SS5, whereas it decreased for Seg3, and the ζsuc was reduced. For a 3° incidence, for example, Seg3 reduced the ζsuc and passage blockage by 12.74% and 8.41%, respectively, and increased the static pressure rise coefficient by 18.55% from the baseline values. Thus, the segmented suction slot proposed in this paper outperformed conventional full-blade height suction slots.