An emerging prospect of solution-processed organic–inorganic hybrid halide perovskites is promising for next generation x-ray imaging applications. Herein, the optical and x-ray scintillation properties of lead-free two-dimensional perovskite crystals are reported, i.e. X 2 MnCl 4 (X = PEA, PPA). At room temperature (RT), the photoluminescence (PL) spectra of both crystals show a peak around 600 nm with the lifetime between 3 and 4 µ s, making them applicable for scintillator in x-ray imaging applications. Materials with a small electronic band gap of about 2 eV may allow a good promise for high-light-yield scintillators. On the other hand, x-ray luminescence (XL) measurements for both crystals show no spectra at RT, while those at 10 K exhibit the similar features observed in PL spectra. Temperature-dependent XL intensities reveal thermal quenching behaviour with activation energies between 40 and 54 meV. Thermoluminescence (TL) and glow curves in both crystals show residual luminescence background as slow as 1648 s and some deep traps with energies as large as 190 meV. Thermal quenching and TL measurements of both crystals are the opposite of those of PEA 2 PbCl 4 crystals. Although some properties may not be beneficial for scintillators, the small differences of scintillation properties in both crystals may provide direction for the new designs of high-light-yield lead-free perovskite single crystal scintillators.
The second harmonic generation (SHG) response was measured for arbitrarily oriented linear input polarization on Si(111) surfaces in rotational anisotropy experiments. We show for the first time, using the simplified bond hyperpolarizability model (SBHM), that the observed angular shifts of the nonlinear peaks and symmetry features—related to changes in the input polarization—help to identify the corresponding interface dipolar and bulk quadrupolar SHG sources, yielding excellent agreement with the experiment. Additionally, we evaluate for the s -in/ p -out ( sp ) and p -in/ p -out ( pp )-polarization SHG intensities the contributions from the individual Si bonds. Furthermore, a relation between the four parameters arising from SBHM and six coefficients of the phenomenological SHG theory needed to reproduce experimental data is established.
1 January 2017 in IOP Conference Series: Earth and Environmental Science
Home Search Collections Journals About Contact us My IOPscience You may also be interested in: The effect of annealing temperature variation on the optical properties test of LiTaO3 thin films based on Tauc Plot method for satellite technology N Djohan, R Estrada, D Sari et al. Study of the crystalline and optical properties of Lithium Tantalate thin films deposited by high power RF magnetron sputtering Dong Pan, Jun Wang, Binwei Sun et al. The effects of film thickness on the optical properties of TiO2-SnO2 compound thin films Sava Sönmezolu, Aysun Arslan, Tülay Serin et al. Defect analysis of sputter grown cupric oxide for optical and electronics application
13 January 2016 in Journal of the Optical Society of America B
We present a comprehensive analysis of second-harmonic generation (SHG) in a diatomic zincblende crystal based on the simplified bond hyperpolarizability model (SBHM) and compare the result with two rotational anisotropy (RA)SHG experiments on a nonvicinal zincblende lattice. We show that bulk dipolar sources alone are sufficient to describe the experimental data by implementing the SBHM previously applied for silicon surfaces to bulk lattices containing two different atoms, e.g., Ga and As. It is shown that a second-rank tensor for a point group has only one independent component and this tensor is equivalent to the one derived by the SBHM model using an effective bulk hyperpolarizability . In addition, SBHM gives an excellent fit with the RA-SHG experiments of GaAs using a single fitting parameter if Fresnel transmission factors are also incorporated in the model, suggesting strongly that bulk dipolar contribution is the dominant SHG source in a zincblende lattice.
In this paper we have grown pure Ba0.25Sr0.75TiO3 (BST) and BST doped by Ferric Oxide Fe2O3 (BFST) with doping variations of 5%, 10%, and 15% above type-p Silicon (100) substrate using the chemical solution deposition (CSD) method with spin coating technique at rotation speed of 3000 rpm, for 30 seconds. BST thin film are made with a concentration of 1 M 2-methoxyethanol and annealing temperature of 850oC for the Si (100) substrate. Characterization of the thin film is performed for the electrical properties such as the current-voltage (I-V) curve using Keithley model 2400 as well as dielectric constant, time constant, pyroelectric characteristics, and depth measurement. The results show that the thin film depth increases if the concentration of the Ferric Oxide doping increases. The I-V characterization shows that the BST and BFST thin film has photodiode properties. The dielectric constant increases with the addition of doping. The maximum dielectric constant value is obtained for 15 % doping concentration namely 83.1 for pure BST and 6.89, 11.1, 41.63 and 83.1, respectively for the Ferric Oxide doping based BST with concentration of 5%, 10%, and 15%. XRD spectra of 15% of ferric oxide doped BST thin film tetragonal phase, we carried out the lattice constant were a = b = 4.203 Å; c = 4.214 Å; c/a ratio = 1.003. Received: 01 February 2010; Revised: 04 October 2011; Accepted: 02 November 2011