Simulations of the atmospheric dispersion of methane emissions were created for a region containing 26 oil and gas production sites in the Permian Basin in Texas. Virtual methane sensors were placed at 24 of the 26 sites, with at most 1 sensor per site. Continuous and intermittent emissions from each of the 26 oil and gas production sites, over 4 week-long meteorological episodes, representative of winter, spring, summer, and fall meteorology, were simulated. The trade-offs between numbers of sensors and precision of sensors required to reliably detect methane emissions of 1 to 10 kg/h were characterized. A total of 15 sensors, able to detect concentration enhancements of 1 ppm, were capable of identifying emissions at all 26 sites in all 4 week-long meteorological episodes, if emissions were continuous at a rate of 10 kg/h. More sensors or sensors with lower detection thresholds were required if emissions were intermittent or if emission rates were lower. The sensitivity of the required number of sensors to site densities in the region, emission dispersion calculation approaches, meteorological conditions, intermittency of the emissions, and emission rates, were examined. The results consistently indicated that, for the conditions in the Permian Basin, a fixed monitoring network with approximately one continuous monitor per site is likely to be capable of consistently detecting site-level methane emissions in the range of 5–10 kg/h.
Mexico approved amendments to its constitution in December 2013 that initiated transformational changes to its energy sector. This study developed a 2016 bottom-up emissions inventory for volatile organic compounds (VOCs), nitrogen oxides (NOx), sulfur dioxide (SO2), carbon monoxide (CO), and fine particulate matter (PM2.5) from upstream and midstream sector sources, including onshore and offshore well sites, gas flaring, natural gas processing facilities, and natural gas compressor stations, throughout Mexican basins. Crude oil storage tanks at onshore oil well sites and venting and fugitive sources at offshore oil production sites were the primary sources of VOC emissions. Key contributions to NOx, CO, and PM2.5 emissions were from internal combustion engines at offshore oil well sites and midstream operations. SO2 emissions were associated with onshore and offshore gas flaring and boilers and process heaters at natural gas processing facilities. Application of the inventory with the Comprehensive Air Quality Model with Extensions (CAMx) indicated that oil and gas production operations could contribute to ozone and PM2.5 concentrations in Mexican and U.S. states under favorable transport patterns. This study provides a foundation for assessing the implications of Mexico’s future energy policies on emissions and domestic and cross-border air quality and public health.